NEW

XRAY FRONT SUSPENSION ARM LONG RIGHT - GRAPHITE - 302173-G

After the success of the Europa for 190mm FWD touring cars, PROTOform is excited to bring a scaled-down version to the ever-popular M-Chassis: meet the Europa M.

Europa M takes styling cues from popular European hot hatches competing in full-scale TCR classes around the globe. With aggressive fender flares and a slammed hatchback roofline, the Europa is bound to make a statement at your track. At the rear of the body, molded in wing platforms support the add-on nylon wing struts and wing to complete the super scale look. Designed and produced using the latest in 3D CAD and 5-axis CNC technology, Europa’s detailing, symmetry and overall quality of surfaces are second-to-none.

This body will fit M-chassis in both 210mm and 225mm wheelbases. Marked inside each wheel well are center points to trim your wheel openings. Just use the included wheel well tracing templates, lining them up on the "+" markings for 225 or "x" markings for 210mm.

The Europa M is produced in our high-quality, lightweight polycarbonate for a low center of gravity, and includes a detailed decal sheet with windshield header and number plates, window masks, and paint-then-peel overspray film.

Please note: All bodies are sold in crystal clear polycarbonate and are painted for advertising purposes only. Extended body posts may be needed in order to mount this body.

Roche Rapide Front Suspension Pivot Balls - 310004

Roche Aluminum 4.3x10.8mm Ballstud Reinforced - 310094

Roche Rapide Plastic Ball Cup Long - 340029

Roche Rapide P12 / F1 Carbon Rear Solid Axle Set - 410032

Roche Rapide Steering Knuckle Set Hard - 340057

Essential 1/12th & F1 RC Racer´s Guide-Book - RCF-Book

Xenon VSS Front End Pivot Ball - OPT-0077

Xenon VSS Front End Titanium Coated Ping Pin - OPT-0078

Xenon VSS Front End Lower Arm Hard - OPT-0061H

Xenon VSS Front end Shock Conversion Kit - OPT-0081

Turnigy ZIPPY 4000mAh 2S1P 25C Car LiPoly - Z40002S-25

1/10 Mercedes MB AMG GT3 4WD TT-02 1/10

Specificaties & kenmerken:

- Schaal: 1/10
- Constructie type: bouwkit
- Gebruik: on-road
- Aandrijving: 4-WD
- Aandrijfsysteem: tandwieloverbrenging
- Aandrijflijn: as
- Differentieel type: tandwiel
- Ophanging: onafhankelijk opgehangen
- Stuurmechanisme: stuurhevel
- Schokdemper: olie gevulde demper
- Materiaal schokdemper: kunststof
- Type band: rubber
- Type profiel: slick
- Body materiaal: polycarbonaat (lexaan)
- Materiaal chassis: kunststof
- Elektronische snelheidsregelaar (ESC): inbegrepen
- ESC type: TBLE-02S Brushed/Brushless
- Ledvoorbereid: nee
- Ledverlichting: nee
- Motor: 540 borsteltype Torque Tuned Motor
- Lagers: kunststof glijlagers
- Instelbaar camber: vast
- Instelbaar toe-in: alleen voor
- Instelbare grondspeling: ja
- Instelbare overbrengingsverhouding: ja
- Instelbare wielbasis: ja
- Instelbare breedte: ja
- Instelbare schokdemperpositie: ja

Benodigd: 7,2 V rijaccu & lader
Benodigd: 2-kanaals zenderset

Specificaties:
- Lengte: 453mm, breedte: 188mm
- Hoogte: 114mm
- Wielbasis: 257mm
- Band Breedte / Diameter: 27 / 67mm (voor en achter)

Tamiya nummer: 58639

1/10 RC TT-02-Chassis First Try On-Road

Deels voorgemonteerde TT02. Leveromvang zonder body.

Meer Info volgt

Tamiya nummer: 57986

1/10 RC Porsche 911 (TT-02)

De Porsche 911 Carrera RSR voegt zich bij de Tamiya TT-02 chassis toerwagen instap line. Het is een legendarische groep 4 auto die een total gewicht had van slechts 900 kg met een 300 pk 6-cilinder motor. De raceauto heeft nog steeds een plaats in de harten van automobiel enthousiastelingen vandaag de dag. In 1973, het jaar van de release, won de Porsche het Europese GT-kampioenschap, plus de beroemde 24 Uren van Daytona en de 12 uren race van Sebring races.

Hoofdkenmerken:

Wielblokken met de vorm van een remschijf geven het chassis een zeer realistisch uiterlijk.
Onafhankelijke ophanging uitgevoerd met dubbele draagarmen, frictiedempers en L/R identieke draagarmen en uprights voor gemakkelijke montage en onderhoud.
Zowel de motor als de accu zijn in de lengterichting geplaatst in het ABS-kunststof chassis voor een uitstekende balans.
Montage van de uprights kan aangepast worden om 4 mm extra grondspeling te verkrijgen voor rally racing.
Specificaties & kenmerken:

Schaal: 1/10
Constructie type: bouwkit
Gebruik: on-road
Aandrijving: 4- WD
Aandrijfsysteem: tandwieloverbrenging
Aandrijflijn: as
Differentieel type: tandwiel
Ophanging: onafhankelijk opgehangen
Stuurmechanisme: stuurhevel
Schokdemper: frictiedemper
Materiaal schokdemper: kunststof
Type band: rubber
Type profiel: slick
Body materiaal: polycarbonaat (lexaan)
Materiaal chassis: kunststof
Elektronische snelheidsregelaar (ESC): inbegrepen
ESC type: TEU- 105BK
Ledvoorbereid: ja
Ledverlichting: nee
Motor: 540 borsteltype
Lagers: kunststof glijlagers
Instelbaar camber: vast
Instelbaar toe-in: alleen voor
Instelbare grondspeling: ja
Instelbare overbrengingsverhouding: ja
Instelbare wielbasis: ja
Instelbare breedte: ja
Instelbare schokdemperpositie: ja
Special feature 1: Stickerset en raammaskers inbegrepen.
Special feature 2: Model uitgerust met 24 mm spaakvelgen in zilverkleur.
Special feature 3: Speciaal vormgegeven voor- en achterlicht units inbegrepen die uitgerust kunnen worden met apart verkrijgbare leds.
Special feature 4: Kies tussen 257 mm of 251 mm wielbasis.
Special feature 5: Grondspeling kan vergroot worden met 4 mm door de montage van de uprights te veranderen (rally set-up).
Special feature 6: Geleverd met motormount die geschikt is voor 380 formaat motoren voor beginnende rijders.
Special feature 7: Geschikt voor rechthoekige rijaccu's.
Special feature 8: Wigvormig chassis om grondcontact tijdens snelle bochten te minimaliseren.
Special feature 9: Schijfvormige wielblokken voor realistisch uiterlijk.
Special feature 10: Symmetrische draagarmen voor gemakkelijke montage en onderhoud.
Benodigd: 7,2 V rijaccu & lader
Benodigd: 2- kanaals zenderset

Tamiya nummer: 58571

1/10, RC Mercedes-Benz 190E Diebels Alt Zakspeed (TT-01E)

De opvallende groen-gouden auto van Diebels Alt (sponsor) is de Mercedes-Benz 190E 2.5-16 Evo.II van team Zakspeed. Deense racer Kurt Thiim reed de Zakspeed 190E met het nummer 18 in het DTM seizoen 1992. Hij eindigde als 2e. Dit model is een remake van de bodyset nummer 50465, en is nu als complete set verkrijgbaar.

Technische gegevens:
- Kit Model
- 1:10 schaal
- TT-01 Type-E chassis
- 4WD vierwielaandrijving via cardanas
- Onafhankelijke wielophanging voor / achter
- 4x Dempers
- Afmetingen: lengte 445 mm, breedte 184 mm
- Wielbasis 257 mm
- Super gedetailleerde Polycarbonaat body (transparant) met stickers etc.
- Mercedes-Benz ster en gril van verchroomd kunststof
- Achter spoiler en spiegel van kunstof zijn detailgetrouw
- Gouden 6-spaaks wielen met 26mm slickbanden
- TAMIYA Torque tuned motor
- Elektronische snelheidsregelaar voor geborsteld en borstelloze motoren
- Kleuren voor Body (optioneel): PS-13 Gold (Body T86013), PS-17 Metallic Green (body T86017), PS-31 rook kleur (raam verf T86031)
- Kleuren voor aanbouwdelen (optioneel): TS-13 vernis glansend (spoiler T85013), TS-21 Gold glansend (Spiegel /T85021), X-18 Black satin (gril T81018) .

Tamiya nummer: 58638

Tamiya 58647 RC M-07 Concept Chassis Kit - M-07

Details:

- Het M- 07 Concept wordt geleverd als kit met een lengte van 332mm en breedte van 164mm.
- Net als bij de TA-07 Pro wordt gebruik gemaakt van een 1-delige chasis met geïntegreerde bovenframe elementen.
- De M-07 is bouwbaar op twee verschillende wielbasisen, achterste ophangarm om te draaien
-  Bouwbaar in M: 225mm en L: 239mm.
- Een belangrijke upgrade; Nieuwe, lange draagarm en stuuronderdelen voor betere hantering.
- De toe in kan achter aangepast worden.Eenvoudig door gebruik van andere spacers.
- Vierwiel onafhankelijke ophanging met CVA-olie gevulde dempers.
- De M-07 wordt geleverd met diff´s welke met olie gevuld worden.
- Universele aandrijfassen
- Volledige set kogellagers.
- Het chassis is compatibel met de standaard vierkante lipo´s.
- Het chassis accepteert ook low-profile servo's dadoor meer keuze en minder gewicht.
- De bodysteunen zijn versterkt om ze duurzamer te maken voor minder flex.

Tamiya nummer: 58647

1/14 R/C Buggyra Racing Fat Fox (TT-01 Type-E)

leveromvang:
Kit met geïllustreerde montage-instructies + certificaat

Technische details:
- TT-01 Type E chassis
- 4WD chassis met aandrijfas
- Onafhankelijke wielophanging met dubbele draagarmen
- Gesloten differentieelbox zowel voor als achter
- Afzonderlijk gegoten zijspiegels en achterspoiler
- TBLE-02S elektronische snelheidsregelaar
- Type 540 elektromotor

Over de kit
- Schaal: 1/10
- Type: Bouwkit
- Terrein: on-road
- Aandrijving: 4WD
- Aandrijf type: tandwielkast
- Aandrijflijn: dog bone
- Differentieel type: tandwiel differentieel
- Vering: volledig onafhankelijk
- Stuur mechanisme: bell-crank
- Schockbrekers: frictie dampers
- Schockbreker materiaal: plastic
- Band Type: rubber
- Band soort: slick
- Body materiaal: doorzichtig polycarbonaat
- Electronische regelaar: inclusief
- Electronische regelaar type: TBLE-02S
- LED verlichting voorbereid: ja
- LED verlichting: nee
- Motor type: 540 geborstelde motor
- Lager: plastic
- Chassis materiaal: plastic
- Sticker materiaal: vinyl
- Interne overbrenging: 8.35 met 19 Tands Tandwiel
- Instelbare camber: vast
- Instelbare toe angles: alleen voor instelbaar
- Instelbare rijhoogte: ja
- Instelbare overbrenging: ja
- Instelbare wielbasis: ja
- Instelbare breedte: vast
- Instelbare vering: ja
- Bijzonderheden: Raam afplakstickers en plastic spiegels
- Nog nodig: 7.2V accu undamp; acculader
- Nog nodig: afstandsbesturing + servo
- Nog nodig: polycarbonaat verf

Tamiya nummer: 58661

Intellect Lipo LiHV 120C 1S 8200mAh 3.8V - IPCC1S8200HV4

For 2019 are Intellect's range of awesome LiPo batteries! The new LiHV HV4 will display a higher voltage and power than 2018 models.

Bench-marked against other leading brands, Intellect batteries provide higher performance for the same specification of battery.

2019 batteries are all Silicon-Graphene based LiHV. Silicon Graphene packs have improved cycle time when charged at 1C rates and can be charged at a higher C rating, with less risk of damage to the pack. LIHV technology has the ability to be charged to 4.35v per cell, but normal racing regulations allow up to 4.2v so LIHV are much safer.

To address market demands 2 options nominally are available Hi Power and Long RunTime.

BRCA/EFRA Legal as of April 2019

Modified and Stock Spec 8 Minute battery
18.5H x 47W x 93L mm
8200mAh
120C
150g
4mm Plugs
Connectors supplied.

Hobbywing XeRun XR10 Justock G3 ETS ESC & XeRun Justock G2.1 17.5T ETS Motor

Deze Hobbywing combo is het nieuwste aandrijvingspakket voor de FWD klasse in ETS. Het is ook een perfecte combo voor iedereen die van echt stockracen houdt.

De controller is zeer gevoelig en gemakkelijk te bedienen, en de rem werkt geweldig. De 17,5T motor heeft voldoende vermogen en past perfect bij de software van de controller.
Voor gemakkelijke identificatie zijn de regelaar en de motor voorzien van een ETS  lasergravure.
Er is vooraf geïnstalleerde software op de ESC die vervolgens met de ETS in de Fronti-klasse wordt gebruikt.

De ESC kan geprogrammeerd worden via de Hobbywing programmeerbox of de WIFI module.
De kwaliteit van Hobbywing is alom bekend, en deze geweldige voorraadcombo sluit naadloos aan en loopt als een zonnetje!

XeRun XR10 G3 Justock-controller:

• Aluminium behuizing
• vaste condensator
• Bescherming tegen omgekeerde polariteit
• Programmering ook mogelijk via LCD box en WiFi/OTA module!
• BEC naar keuze met 6,0V of 7,4V - instelbaar op 4A
• zwarte motor- en accukabels
• Type: borstelloos met sensor
• Continue stroom: 60A
• Ingangsspanning: 2S LiPo
• BEC: 6,0/7,4V - 4A
• Motorgrens: 10,5T (Let op, belasting afhankelijk!)
• Afmetingen: 40,9x33,9x32,1mm
• Gewicht: 75.4g

XeRun Justock G2.1 17.5T

• Motor: Draaien: 17.5T
• Timing: Fix

XRAY X12'20 ALU CHASSIS 2.0MM - 7075 T6 - 371114

XRAY X12'20 ALU FLEX CHASSIS 2.0MM - 7075 T6 - 371115

XRAY X12'20 GRAPHITE CHASSIS 2.5MM - 371113

A new line of 3 Battery plates is added to the already existing OfficinaRC 32g (OFC-004).

These battery plates are designed to give all the possible balancing possibilities for your models.

Usable for all categories On road and Off road thanks to the diversity of weight they allow an optimal balance for all needs.

The OfficinaRC 23gr (OFC-005) 131mmx34.5mmx0.6mm is designed to be used with a standard measurement battery. This plate can be applied using double-sided tape on the battery or directly on the chassis.

Silicon-rubber compensation membranes for shock absorbers. All-new low-profile shock membranes allow for easier shock rebound adjustment. 
The new Low-profile Membranes must be used with #308091 Low-profile Shock Foam Inserts, and will fit any XRAY shocks. Set of 4.

XRAY Ball-Bearing 5x8x2.5 Flanged - Steel Sealed - Oil (2) - 950508

Composite body back stop set for 1/10 touring cars (electric or nitro), made from lightweight composite material, provides support for the rear of body shell to prevent tucking under the rear wheels due to a collision from the rear, thus reducing lost racing time and increasing body lifespan. Posts are quickly & easily mounted, and are trimmmable for perfect fitment. Set of two, includes mounting hardware.

The XR10 Pro G2 ESC is designed for 1/10th and 1/12th RC car racing.

IT features a 32-bit microprocessor, built-in BEC with maximum current of 10A and voltage adjustable from 5 to 7.4v, battery-protection circuit, dual-switch control, adjustable maximum brake force (extended to 150%) and PWM & Brake frequencies and Turbo increase & decrease rates, and switchable motor direction (CCW/CW)

Upgraded M4 Microprocessor (32-bit) for
Professional Racing

High-performance 32-bit M4 microprocessor is implemented in the XR10PRO G2 for Super-fast and precise processing of complicated data operations, this allows the ESC to have a very rapid and precise response with extraordinary potential to optimize and extend its functions further. The XR10 PRO G2 is an exceptional piece of Hardware combined with accurate and powerful software makes this ESC into a “Precise weapon” for high end professional racing.

Internal Battery-Reverse Polarity Protection Circuit

With the Built-in Reverse Voltage Protection circuit, ESC's internal parts are all protected from Cross Connection of battery power. 
(Note: the overall power system will be protected from damage when non-polarized filter capacitors are used; the standard electrolytic (external capacitors ) supplied for this ESC have no reverse polarity protection, so the capacitors (only) ,not the ESC will be damaged  when reverse polarity installation occurs.)

Innovative Dual-Switches / Removable External Switch

Internal electronic switch & external removable switch for easy and convenient  usage. The internal switch simplifies wiring while the external switch solves the issue “it’s hard to reach the built-in switch when the car body is mounted on or  inner chassis placement of ESC”. External switch is perfect for off-road applications. (Warning! This is Hobbywing’s registered patented)

Updated Drive, and Brake PWM Frequency

Drive PWM:1-32KHz
Brake PWM:0.5-16KHz

Tunable Turbo Increase & Decrease Rates

More fine tunable values have been implemented for Turbo Increase & Decrease Rates which allows the end user to fine tune the turbo for optimal performance when racing at different size tracks .

Switchable Motor Direction

Switchable motor direction: CCW & CW for various chassis.

Super Internal BEC

Built-in switch mode BEC with a maximum output of 10A and voltage adjustable from 5V to 7.4V (step:0.1V) for usage with high voltage servos.

Softening Function (Hobbywing’s Patented Technology)

Softening function implemented in this ESC allows user to fine-tune the bottom end allowing for maximum controlled power of vehicles used in Modified class racing applications.

Programming/Upgrading/Data Reading Wirelessly

With Hobbywing’s “WiFi Express” module and iPhone or an Android phone (with the Hobbywing WiFi Link App installed), users can remotely program parameters, upgrade firmware and check relevant data of the ESC without leaving the control stand.

Data-logging Function

This ESC features the data-logging function which can record the maximum ESC/motor temperature, RPM and etc. in real time and allows users to check those data via a LCD program box or WiFi module after each use. In the future, new (ESC) firmware will not only record the maximum temperatures, RPM and others but also provide complete operation (status) curve for users.

This new kit is released in orange and is available for the Xray T4 19! The perfect match with the T4 orange alu parts. This new and exclusive kit is RZ shielded, (steel and rubber), that ensure the best combo for smoothness and protection!

All the ball bearings are lubricated with oil instead of grease in order to have immediate high speed and smoothness performance!

4x High-Speed Ball-Bearing 10X15X4 RZ

8x High-Speed Ball-Bearing 5X10X4 RZ

2x High-Speed Ball-Bearing 5x9x3 RZ

Corner Speed RC O-ring Grease - CS800103

Corner Speed RC MAXI FREE 2 CV Joint Lube (10ml) - CS800104

The HC-F project was born from the desire to offer to all the rc enthusiast an new top quality body shell for the growing front wheel drive divison. Tested for several months the product combine a stunning realistic aesthetic together with performance at the top of the class.

Designed to Win

The HC-F body shell represent a new reality for drivers all around the world who always push to obtain the best result with their models.

Thanks to the collaboration with our experienced European and Asian team drivers we have been able to follow and realize valuable suggestions that have allowed us to adopt some changes to the initial project necessary to greatly improve the driving precision and reduce the rolling of the model caused by the typical high roof of all the FWD body shells.

Italian Pure Excellence

The design recalls the forms of the "queen" par excellence of real scale front-wheel drive cars produced in Japan, the refinement phase took several months to optimize every detail, the attention to detail has been obsessive in order to propose a body that could exalting the performance of the Japanese car at its best.

HC-F is a FWD body with a breathtaking look that we offer in the Racing version with widened wheel arches in order to guarantee a better aerodynamic performance optimized both thanks to the large front spilitter and thanks to the specially designed wing that generate stability and rear wheel drive as well as make the model balanced and easy to drive.

Product Features

The body it's UNIVERSAL and fit all the 1/10 190mm cars on the market; can be mounted on the traditional 4WD touring chassis as well on the the recent all new model car developed by the factories exclusively for the front wheel class (FWD)

• Made with high quality and genuine polycarbonate Lexan®
• Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
• Produced in Light Weight version, thickness of material 0,75mm
• Sold clear with protective film outside
• Included in the package a decal sheet and windows mask

3D Cad design & engineering

In order to respect our quality standards, Bittydesign have not set any limits and we have realized the HC-F project with the use of the most advanced graphics and Cad design; this process guarantees a perfect execution of the forms and details that high-tech machinery realize with 5-axis CNC milling machines.

The product Bittydesign delivers in the hands of the enthusiast represents the best available on the market today, they exploit and make full use of the most advanced technology to guarantee a result that represents at best the Italian excellence.

Featuring the industry first 9 exhaust fins design which generates a twisting wind pattern for focused air flow, hence more air to cool the object. With the 9 exhaust fins design the support structure between the case and the core has increased 3 fold, together with thicker side wall the case is so much stronger than the standard 30 mm fan. A round lip also moulded into the intake side of the fan for further smooth out the air flow. Last but not least, these fans have been manufactured with all new electronics.

Mon-Tech Mito-RX FWD/Rally body shell - 019-007

HUDY PURE TUNGSTEN WEIGHT 5g - 293081

HUDY PURE TUNGSTEN WEIGHT 10g - 293082

Fully adjustable battery aluminum holder & brass weights for short pack batteries. Allows to move the batteries front and rear but also left to right for easy and comfortable weight transfer adjustment. The holder allows to move the battery which changes the Front/Rear weight balance by 4mm. Design of the battery holder eliminates any negative chassis flex.

Each of the weights (2) is 40g heavy and allows to mount the shorty battery into the center of the chassis for perfect distribution of the weight.
 

XRAY ORANGE Spur Gear 84T : 48 - 305784-O

XRAY ORANGE Offset Spur Gear 110T : 64 - 305880-O

XRAY ORANGE Offset Spur Gear 96T : 64 - 305866-O

Fully adjustable brass battery holder allows to move the batteries in all directions - front/rear and also left/right. The adjustable battery holder allows for easy and comfortable weight transfer adjustment. The front/rear weight balance can be adjusted in 4mm range. The brass material adds extra 7.5g weight for additional weight balance adjustment of the battery side of the car. 

The battery holders allow to mount the battery tape over the top of the battery only without the instalment of the tape under the chassis which allows increased flex of the chassis and as such helps to generate more traction. Thanks to the chassis-free instalment of the tape the ride height of the car can be slightly decreased as there is no more tape under the chassis. 

The adjustable holder and the battery backstops are CNC-machined from brass material and the battery holders are machined from premium lightweight graphite material.
 

Fully adjustable aluminum battery holder allows to move the batteries in all directions - front/rear and also left/right. The adjustable battery holder allows for easy and comfortable weight transfer adjustment. The front/rear weight balance can be adjusted in 4mm range.

The battery holders allow to mount the battery tape over the top of the battery only without the instalment of the tape under the chassis which allows increased flex of the chassis and as such helps to generate more traction. Thanks to the chassis-free instalment of the tape the ride height of the car can be slightly decreased as there is no more tape under the chassis. 

The adjustable holder and the battery backstops are CNC-machined from lightweight aluminum and the battery holders are machined from premium lightweight graphite material.
 

Dash Silicon Wire 14AWG 1m - DA-771005

Mon-Tech Racer2 Touring Electric Car Clear Body 190mm - 019-006

Presenting Magic Grip!

A new era of additive is coming to your line-up! This amazing additive will offer you unlimited traction and grip like never seen before, will suit all your tracks and will improve your lap times as well as your driving experience.

Tested by drivers like Ronald Völker, David Ronnefalk and Viljami Kutvonen proves this additive to be worth giving a try!

The additive comes in a 60mL bottle with foam for an easy apply on your tyres. It offers grip depending on the time applied to your tyres (see our Grip Level Table).

Hiro Seiko Power Cable 60cm Silver - 12AWG - 48390

Everyone knows besides gold, Silver has the highest conductivity among all the ingredients.  However, only a few manufacturers are willing to develop power cable with silver wire.  Maybe some audio equipment related industry would develop it but there’s no other manufacturer has developed something like silver wire in RC industry.



We have targeted and improved the efficiency of conductivity.  In the first time in RC history, we released 12 AWG Power Cable with Silver Wire.

●12 AWG

●Ø0.05x1786 Strands

●Withstand Voltage 250/500V

●Temperature Range -40℃~180℃

●Length 60cm

Ultimate body repair tape debuts!
This ultra clear tape is invisible so that you can apply it to the body surface.
Due to the special film used, it is extremely durable and fits well even on curved or uneven surfaces.

Made in Japan

The unique XRAY ECS Drive Shaft with 2.5mm pin equalizes the speed between the drive shaft and the wheel. With a unique 2-piece joint between the axle and the wheel, the same extreme wheel turning angle is divided into two shallower angles without joint binding. This means that at the same cornering speed, the inner wheel will not bind or vibrate. Drive through the corner is more stable, more precise, and easier to drive. The ECS Drive Shafts help also with improved landing after jumps.

With the ECS drive shafts, wheel vibrations and noise are decreased to minimum, steering is increased, stability of the car is increased and cornering speed and smoothness are noticeably increased as well. A must have option part.