NEW

XRAY T4'19 ULP SHOCK TOWER REAR 3.0MM GRAPHITE - 303084

XRAY T4'19 ALU MOTOR MOUNT - ORANGE - 303006-O

XRAY T4'19 ALU LAYSHAFT BULKHEAD RIGHT - ORANGE - 303005-O

XRAY T4'19 ALU LOWER ADJUSTMENT BULKHEAD - FRONT L / REAR R - ORANGE - 302763-O

XRAY T4'19 ALU LOWER ADJUSTMENT BULKHEAD - FRONT R / REAR L - ORANGE - 302762-O

XRAY ALU SHIM FOR RADIAL PLAY ADJUSTMENT OF STEERING ARM - ORANGE (2) - 302544-O

XRAY T4'19 ULP SHOCK TOWER FRONT 3.0MM GRAPHITE - 302083

XRAY T4'19 ALU UPPER CLAMP WITH 2 ADJ. ROLL-CENTERS (L+R) - ORANGE - 302036-O

XRAY GRAPHITE SHIM FOR REAR BODY POST ADJUSTMENT 3.0MM (4) - 301390

Rear body mount set includes 6mm thick body posts made from special composite material that provides maximum strength but sufficient flex to reduce body post breakage in hard crashes or car rollovers. The body supports are rounded to have a better fit and provide better support to the car body. 

XRAY COMPOSITE FRONT ECCENTRIC 6MM BODY MOUNT SET - 301326

XRAY FOAM BUMPER FOR ADJUSTABLE BODY MOUNTS - LIGHT - 301231

XRAY COMPOSITE UPPER HOLDER FOR BUMPER FOR ADJUSTABLE BODY MOUNTS  - 301219

XRAY COMPOSITE BUMPER FOR ADJUSTABLE BODY MOUNTS - 301204

XRAY T4'19 GRAPHITE CHASSIS 2.2MM - 301148

Bittydesign Magnetic Body Post Marker Kit - Color : Orange - BDBPMK10-O

Mon-Tech Racer Pre-Cut Asphalt for Xray - 018-010

Mon-Tech Racer Pre-Cut Carpet for Xray - 018-011

PROTOform Better Edge System: Sanding Drum - 6103-00

Bittydesign 1/10 Body Clips Kit 8pcs Orange - BDBC-8O(4x Left + 4x Right)

T4'19 Graphite Upper Deck 2.0mm - Worlds Edition

• World Champion top deck

• Narrower design

• Allows increased chassis flex

• Increases traction

• Increases in-corner steering

• For low-to-medium traction tracks

• 2mm thickness

High-quality CNC-machined top deck made from 2.0mm premium graphite material. The special narrower design allows more chassis flex, which helps to generate more traction and increase in-corner steering. Recommended for use with either standard graphite chassis or optional alu chassis on low-to-medium traction tracks.

#301150 T4'19 Alu Flex Chassis 2.0mm - Swiss 7075 T6

• Special cutout openings

• Increased flex

• Easier to drive

• For medium-to-high traction tracks

• Fits front chassis brace

• 2mm thickness

• Swiss 7075 T6 aluminum

• Black anodized

Aluminum T4’19 chassis with special cutout openings for increased flex.

Redesigned to accommodate the T4’19 front chassis brace. The front brace – which can be easily installed on the chassis with two screws – eliminates side flex at the front of the chassis, improving steering response and making the car more predictable.

This chassis is recommended for and works extremely well on medium-to-high traction tracks. (Not recommended for very-high traction conditions where the #301149 - Alu Chassis works better.)

This alu flex chassis generates more traction and makes the car faster and easier to drive. Successfully raced by the factory team, this is a “must have” for every serious racer.

XRAY FRONT SPRING-SET L=42MM - 3 DOTS (2) - 368193

XRAY FRONT SPRING-SET L=42MM - 4 DOTS (2) - 368194

XRAY REAR SPRING-SET L=57MM - 2 DOTS (2) - 368292

XRAY REAR SPRING-SET L=57MM - 3 DOTS (2) - 368293

XRAY REAR SPRING-SET L=57MM - 4 DOTS (2)

XRAY XB4 BODY - ALPHA 4 - 369705

HUDY Adjustable Ride Height Gauge 30-45mm
 

• For truggy & truck

• Easy & fast ride height adjustment

• Adjustable gauge in range 30-45mm

• 1mm increments

• Small & lightweight

• Black color

• Laser engraved with scale
 

High-quality, easy to use adjustable ride height gauge measures 1/8 off-road ride height.

The gauge twists by 1mm increments to increase or decrease the height in a range of 20-30mm. The gauge is super small and lightweight, allowing for easy storage & transport.

CNC machined from premium Swiss 7075 T6 aluminum, black color coated, with a laser-engraved scale.

XRAY ALU SHIM 3x6x3.0MM - ORANGE (10) - 303125-O

XRAY REAR ADJUSTABLE DRIVE AXLE LB - HUDYSPRING STEEL - 325341

XRAY ALU SHIM 10x12x2MM (2) - 325390

XRAY BODY FOR 1/10 2WD OFF-ROAD BUGGY 0.75MM - BETA 2 - 329707

XRAY COMPOSITE STEERING BLOCK - HARD - 362250-H

XRAY GEAR DIFFERENTIAL FOR 2.5MM PIN - SET - 364902

XRAY GEAR DIFF OUTDRIVE ADAPTER FOR 2.5MM PIN - HUDYSPRING STEEL (2) - 364961

XRAY STEEL BEVEL DRIVE GEAR - CNC-MACHINED - 14T - 365124

XRAY FRONT DRIVE SHAFT 81MM WITH 2.5MM PIN - HUDYSPRING STEEL - 365222

XRAY CENTRAL SHAFT UNIVERSAL JOINT FOR MACHINED PINION - 365442

FRONT linear springs have been specifically designed to complement the big-bore shocks. Spring rate is constant during the entire spring compression. Marked with 2 DOTS for easy identification.

The springs, like all the other XRAY springs, are manually measured, selected and matched into pairs to guarantee precisely equal length and damping characteristics. 

Motiv Universal Bearing Tool (All Brand Motors) - MOV1960

What makes this bearing tool special is its ability to adapt to any design motor and also that it can be completely rebuilt to replace any part necessary in the event that something strips or gets bent. Included are three different cup sizes which will allow you to choose the proper place on your sensor unit or end bell to apply the pressure necessary to install new bearings. This results in drastically reducing the chance of motor damage during bearing installation.

 

Mon-Tech 0.75mm Racer Wing Medium - 018-003M

Mon-tech F18 Formula Body shell - 018-009

MR33 V4 Carpet Additive 100ml ETS - MR33-0004

SANWA MX-6 Radio Set with RX-391W - 101A32571A

Speedtech RC Foam Liquid multiple world champion and european champion - MOB1000

MobGums 1/12 dishers rear tyres white compound for ETS carpet - MOBR335

MobGums 1/12 dishers rear tyres silver compound for ETS carpet - MOBR135