HS-RACING LAGERS 8*14*4 FLANS RUBBER
HS RUBBER FLANS LAGER

HS-RACING LAGERS 8*14*4 FLANS METAL
HS FLANS METAL LAGER

HS-RACING LAGERS 6*12*4 RUBBER
HS RUBBER SIELD LAGER

HS-RACING LAGERS 6*12*4 METAL
HS METAL SIELD LAGER

HS-RACING LAGERS 6*13*5 METAL
HS METAL SIELD LAGER

HS-RACING LAGERS 6*10*3 RUBBER
HS RUBBER SEALD LAGER

HS-RACING LAGERS 5*12*4 RUBBER
HS RUBBER SEALD LAGER

HS-RACING LAGERS 5*12*4 METAL

HS-RACING LAGERS 5*10*4 FLANS METAL
HS FLANS RUBBER LAGER

HS-RACING LAGERS 5*10*4 FLANS METAL
HS METAL FLANS LAGER

HS-RACING LAGERS 5*9*5 RUBBER
HS RUBBER SEALDED LAGER

HS-RACING LAGERS 5*9*5 METAL
HS METAL SIELDED LAGER

HS-RACING LAGERS 5*11*5 RUBBER
HA RUBBER SEALED LAGER

HS-RACING LAGERS 5*13*4 RUBBER
HS RUBBER SIELD LAGER

HS-RACING LAGERS 5*13*4 METAL
HS METAL SIELDED LAGER

HS-RACING LAGERS 5*8*2.5 RUBBER
HS RUBBER SIELD LAGER

HS-RACING LAGERS 5*8*2.5 METAL
HS METAL SHIELD LAGER

HS-RACING LAGERS 5*8*2.5 RUBBER FLANS
HS FLANGED RUBBER SIELDED LAGER

HS-RACING LAGERS 5*8*2.5 METAL FLANS
HS FLANGED METAL LAGER

HS-RACING LAGERS 5*11*4 RUBBER
HA RUBBER SELDED LAGER

HS-RACING LAGERS 5*11*4 METAL
HS METAL SIELDED LAGER

HS-RACING LAGERS 5*10*4 RUBBER
HS RUBBER SEALED LAGER

HS-RACING LAGERS 5*10*4 METAL
HS MEATAL SHIELDED LAGER

HS-RACING LAGERS 3*8*3 RUBBER
HS RUBBER SEALED LAGER

HS-RACING LAGERS 3*8*3 METAL
HSMETAL SHIELDED LAGER

HS-RACING LAGERS 3*7*4 RUBBER
HS RUBBER SEALED LAGER

HS-RACING LAGERS 3*7*4 METAL
HS METAL SHIELD LAGER

HS-RACING LAGERS 3*8*4 RUBBER
HS RUBBER SEALED LAGER

HS-RACING LAGERS 3*8*4 METAL
HS METAL SIELDED LAGER

HS-RACING LAGERS 3*6*2.5
FLANGED HS RUBBER SEALED LAGER

HS-RACING LAGERS 3*6*2.5
FLANSGED HS METAL SIELDED LAGER

HS-RACING LAGER 6*13*5
HS RUBBER SEALED

HS-RACING LAGER-5*10*4
HS METAL SHIELDED CLUTCH LAGER.

These are Double Cardan drive shafts, which were designed for and included with the M-05 Ver.II R chassis kit (Item 84424). They are available as a stand-alone Hop-Up Option for any of Tamiya"s M-05 machines. They offer minimal deviation and give improved suspension feel.

- Drive Shaft x2
- Wheel Axle x2
- Joint Casing x2 (Item 42219)
- Parts from Cross Joint for Double Cardan Joint Shaft (Item 42221)
- Compatible with M-05, M-06, MF-01X and TA05 M-Four chassis cars.

Tamiya nummer: 42300

Bittydesign Clips Kit for 1/10 Off/On-road Bodies (Gold, 8pcs)

Bittydesign Clips Kit for 1/10 Off/On-road Bodies (Green, 8pcs)(4x Left + 4x Right)

Bittydesign Clips Kit for 1/10 Off/On-road Bodies (Pink, 8pcs)(4x Left + 4x Right)

Bittydesign Clips Kit for 1/10 Off/On-road Bodies (Blue, 8pcs)(4x Left + 4x Right)

The LSM19 project express the desire to create something different on the market thanks to some aerodynamic solutions that make the body immediately recognizable due to its futuristic lines and a placement of the cab never seen before in this category.

The unconventional

We like to think differently and adopt aesthetic and aerodynamic solutions that deviate from the "standard", for this reason, inspired by the latest futuristic projects and concepts of the most important car manufacturers we have decided to create a body that encloses these innovative elements.

The forward placement of the cab is the element that identifies the design, giving the body not only a scenic and aesthetic detail different from the usual but also reflects on the performance on the track.

Developed for pure performance

During the design stage, the attention was focused not only on aesthetics but especially on the surfaces and forms designed to obtain the best possible performance.

The design has been adapted to meet the specs of the 1/12 Pan-car class, the introduction of a generous front split and the advanced cab increase the steering and the closing of the model close to the slow turns, the two side bulkheads placed in the mid body contain the air flow that flows more to the rear increasing stability and balancing the body as a whole.

Features:

The body it's UNIVERSAL and fit all the 1/12 Pan-car chassis on the market; it respect all the international specs of the category and it's Efra approved.

• Made with high quality and genuine polycarbonate Lexan®
• Produced in Light Weight version as well Ultra Lite (ULT)
• Sold clear with protective film outside
• Included in the package a decal sheet pre-cut and windows mask

From RC enthusiasts to World Class Drivers seeking to adjust their shock oil quickly between heats, the Ride Air Remover has become a must-have among all RC accessories over the years.

It was time to redefine our best seller.

The Long version is then adapted for long length shocks commonly used in Off-Road application.

Upgraded Long Air Remover version (29101) includes the following new contents:

·         Lightweight damper stand can receive countless types of shocks and also gear differential.

·         Includes a handy and light pouch for easy transportation.

19803279 TA08 King Pin (BLK)(2) 58693 58681

Carbon design film 230x300mm sticker

Coming from Sweep Racing is their new EXP R3 PRO CARPET competition touring car tyre. Brand new tyre was developed with Mibosport cooperation for "ETS" spec carpet and use on popular Mibosport Cup series. Testing took place in several places in Europe and Asia, so thanks to all drivers and facilities for help to create new special carpet tyres. It was tested by different levels of Modified/Stock drivers headed by Mibosport driver Ronald Völker. Tyres use well-proven carpet 32 hardness rubber compound on new R3 profile. New profile will offer improved steering response and forward bite. The carcass now has a more round shape for better steering emphasis and the compounds will ensure more consistent lap times toward the end of a run. Complete new insert help also with long life of these tyres.

54952 Rein. Tire Type C2 24mm (2)
perfect for carpet.