There are no products in your shopping cart yet.
ABSIMA
5 / 11
Loading...
ABSIMA Hex locknut 17mm silver (4)
€ 7,95
Hex locknut 17mm silver (4)
√ 1/8 scale – 17mm
√ Thread pitch: 1.0
√ Material: Aluminum
√ 4 pcs./set
ABSIMA High speed Twin Fan + holder plate, 15,000rpm, 30mm size
€ 16,95
Functies:
- 2 ventilatoren voor koellichaam
- 15.000 tpm
- BEC-connector
- Afmeting (LxBxH) ca. 30 x 30 x 10mm
- Boorgat afstand 25 mm
- Met aluminium montageplaat: 60 x 30 x 3mm
Absima LiPo 7.4V-25C 5000 Hardcase (TAM-Plug)
€ 34,95
This Absima LiPo battery is the perfect choice for "brushed" RC cars. The perfect C-rate and the low weight ensure maximum driving pleasure!
Features:
- Plug system: Tamiya
- Minimum capacity: 5000 mAh
- Voltage: 7.4 Volt
- C-rate: 25 C
- Watt hours: 37Wh
- Balancer plug system: XH
- Battery box design: Hardcase
- Measures (LxWxH) 138 x 46 x 25 mm
- Weight: 255 g
ABSIMA LiPo 7.4V-30C 4200 Hardcase (TAM) - 4140004
€ 34,95
Battery type: LiPo
Hard Case
Capacity: 4200mAh
C-rate: 30C
Plug system: Tamiya
Balancer plug system: XH
Voltage: 7.4V
Dimension: 137x46x24mm
Weight: 219g
ABSIMA Lower Suspension Arm (2) Buggy/Truggy 1:10
€ 15,95
Lower Suspension Arm (2) Buggy/Truggy 1:10
ABSIMA Metal Top Heatsink with fan for 1:8 up to ø40mm , black
€ 18,95
Features:
- Heat sink for 1:8 elektric motors
- 12 cooling fins ? Material: Aluminum
- Clamp mounting Ø: 38 mm
- Measure (LxWxH): 47 x 40 x 28mm
- Fan with 8.000RPM
- Measure fan: 40 x 40 x 15mm
- BEC plug
ABSIMA Metalen Top Heatsink voor 1:8 maat 41-43mm
€ 12,95
Metalen Top Heatsink voor 1:8 maat 41-43mm
ABSIMA Metalen zijkoellichaam voor 1:10, zwart
€ 6,95
Metalen zijkoellichaam voor 1:10, zwart
Functies:
- Koellichaam voor 1:10 elektrische motoren
- Geschikt voor motoren van 540 en 550
- Materiaal: Aluminium
- Klemmontage Ø: 36 mm
- Zijmontagebeugel voor extra ventilator van 30 mm (boorgatafstand: 25 mm)
- 24 koelribben
- Afmetingen (LxBxH): 45 x 29 x 30mm
Absima presents new „lightweight" 12mm aluminum 7075 T6 wheel hubs.5-0.75 4.25MM
€ 11,00
Absima presents new „lightweight" 12mm aluminum 7075 T6 wheel hubs.
5-0.75 4.25MM
Available in different width, to change the track.
The gun-metal anodized offset wheel hubs are available from -0.75mm up to +3.00mm.
Scope of delivery:
● 2pcs. wheel adapter
● Absima sticker sheet
5-0.75 4.25MM
Available in different width, to change the track.
The gun-metal anodized offset wheel hubs are available from -0.75mm up to +3.00mm.
Scope of delivery:
● 2pcs. wheel adapter
Absima presents new „lightweight" 12mm aluminum 7075 T6 wheel hubs.5+1.75 6.75
€ 11,00
Absima presents new „lightweight" 12mm aluminum 7075 T6 wheel hubs.
5+1.75 6.75MM
Available in different width, to change the track.
The gun-metal anodized offset wheel hubs are available from -0.75mm up to +3.00mm.
Scope of delivery:
● 2pcs. wheel adapter
● Absima sticker sheet5+1.75 6.75MM
Available in different width, to change the track.
The gun-metal anodized offset wheel hubs are available from -0.75mm up to +3.00mm.
Scope of delivery:
● 2pcs. wheel adapter
Absima presents new „lightweight" 12mm aluminum 7075 T6 wheel hubs.5+2.25 7.25MM
€ 11,00
Absima presents new „lightweight" 12mm aluminum 7075 T6 wheel hubs.
5+2.25 7.25MM
Available in different width, to change the track.
The gun-metal anodized offset wheel hubs are available from -0.75mm up to +3.00mm.
Scope of delivery:
● 2pcs. wheel adapter
● Absima sticker sheet5+2.25 7.25MM
Available in different width, to change the track.
The gun-metal anodized offset wheel hubs are available from -0.75mm up to +3.00mm.
Scope of delivery:
● 2pcs. wheel adapter
Absima presents new „lightweight" 12mm aluminum 7075 T6 wheel hubs.5MM
€ 11,00
Absima presents new „lightweight" 12mm aluminum 7075 T6 wheel hubs.
Available in different width, to change the track.
The gun-metal anodized offset wheel hubs are available from -0.75mm up to +3.00mm.
Scope of delivery:
● 2pcs. wheel adapter
● Absima sticker sheetAvailable in different width, to change the track.
The gun-metal anodized offset wheel hubs are available from -0.75mm up to +3.00mm.
Scope of delivery:
● 2pcs. wheel adapter
ABSIMA Roundhead Screw set
€ 15,95
Features: All common roundhead screws you need for a 1/8 & 1/10 scale car.
Contains:
- 10 x Roundhead screw M3*5
- 10 x Roundhead screw M3*6
- 10 x Roundhead screw M3*8
- 10 x Roundhead screw M3*10
- 10 x Roundhead screw M3*12
- 10 x Roundhead screw M3*16
- 10 x Roundhead screw M3*20
- 10 x Roundhead screw M4*10
- 10 x Roundhead screw M4*14
- 10 x Roundhead screw M4*16
ABSIMA Scale 1:16 4WD High Speed Sand Buggy 2,4GHz Black/Red - 16005
€ 89,95
Discover the RC model sport with the "First Step Performance" from Absima. More than 35 KM/H and power to the max you will get with this awesome model. Of course you will be supported by real RC model technique. A safe 2.4 GHz remote control system supports the 40A electronic speed controller to release the power at your command. Small, fine, and mean! Take the first step into the world of RC model sport with this ready-to-run set.
Enjoying real RC racing with the 1/16 4WD RC car, you can get started quickly and handle it like a master. Competing with other advanced RC car lovers and enjoying the exciting racing on the street, in your backyard or in the woods!.
HIGHLIGHTS:
- Water-resistant Electronic
- Incl. Car Battery and USB Charging Cable
- Incl. LED Headlights
GENERAL CHASSIS FEATURES:
- 1/16th Scale
- 4WD
- Complete Ball Bearing
- 1.8kg Steering Servo
- Front & Rear Differentials
- Differential gears and motor pinion made from metal
- Shocks with Aluminum Caps
- High Performance Motor and Speed Controller
- CVD Drive Shafts
- Range aprox. 60m
- Drive Time: aprox. 12 Minutes
- Aluminum Cardan Shafts
- Adjustable Speed on the Radio
- Overheat Protection
- Incl. LED Headlights
- Incl. 2.4 GHz Radio System
- Full printed Body
- Overcharge & Over-discharge Protection
- 500mAh Li-Ion Car Battery
TECHNICAL SPECIFICATION:
- Measure: (L/W/H): 270 x 235 x 130 mm
- Weight : 730g
- Wheelbase: 175 mm
- Chassis Clearance: 45 mm
- Track Width: 190 mm front/rear
- Wheel Design: Monster Rubber / 5 Double Spoke Rims
- Tire Width: 45 mm
- Reifen Ø: ± 80 mm
- Shock Oil Viscosity : n.a.
- Shock Spring Force: Medium
- Shock Instalation Length: 65 mm front/rear
SCOPE OF DELIVERY:
- 1/16th RC Car
- 2.4 GHz Radio System
- Car Battery
- USB Charging Cable
- LED Headligths
- Manual
- 3 AA Cells for Radio