Hobbywing Xerun 3660sd D5.00 G2, 3200kv, Black, Hw30401150

Hobbywing Xerun 3660sd D5.00 G2, 3600kv, Black, Hw30401151

Hobbywing Xerun 3660sd D5.00 G2, 4300kv, Black, Hw30401152

Hobbywing Xerun Axe Brushless Esc, 60a

Hobbywing Xerun Axe Brushless Esc, 60a V1.1

Hobbywing Xerun Axe R2 60a Brushless Esc 1/10th Rock Crawl

Hobbywing Xerun Axe540 1200kv Foc Sensored Brushless Motor

Hobbywing Xerun Axe540 1800kv Foc Sensored Brushless Motor

Hobbywing Xerun Axe540 2300kv Foc Sensored Brushless Motor

Hobbywing Xerun Axe540l R2 1400kv Foc Sensored Bl Motor

Hobbywing Xerun Axe540l R2 2100kv Foc Sensored Bl Motor

Hobbywing Xerun Axe540l R2 2800kv Foc Sensored Bl Motor

Hobbywing Xerun Axe550 R2 3300kv Foc Sensored Bl Motor

Product information "Hobbywing Xerun Justock Combo G3S and 17 Turn 2450kV for 1:10 Stock"

A combination of the JUSTOCK 3650SD G2.1 motor and the XR10 JUSTOCK G3S ESC, this combo is perfectly matched for the ambitious stock or races. The XR10 JUSTOCK G3S ESC was specially developed for races and training drives. The expanded "RPM Limit" programming option ensures that the limit can be adjusted depending on the racing requirements - up to 88000RPM as well as unlimited. In addition, there is the well-known fixed 0-Timing, which is often required in races. So get ready for a fair and successful race. Thanks to new programming options compared to its predecessor, it is now also possible to determine the direction of rotation of the motor as well as to set the BEC voltage to a certain value.

Features (ESC)

• Even more available parameters than the normal Justock G3 controller (smart fan, freewheeling, initial throttle force)
• Refined parameter options
• RPM limit of 10000RPM up to 88000RPM in 1000 steps (instead of only 25000 or 33500)
• Perfect for competition thanks to RPM limits and 0 timing
• Direction of motor rotation free choosable (CW or CCW)
• Adjustable BEC voltage (6V or 7,4V)
• Robust aluminum housing for ideal heat dissipation
• Built-in capacitors as a space-saving solution compared to external capacitors
• Various protective functions against polarity reversal, overheating, Fail-safe and more
• Firmware upgrades possible to always be up to date

Features (Motor)

• Heat-resistant magnet and double insulated windings
• Precision bearings
• Cool look and good heat-dissipation
• Linear and smooth control
• Re-buildable design

Technical Specifications (ESC)

Delivery:

1x ESC
1x Motor

Hobbywing XeRun V10 13.5T Black G3 3710kv - 30401103

Hobbywing Xerun V10 13.5t Black G3r

Hobbywing XeRun V10 17.5T Black G3 2830kv - 30401104

Hobbywing Xerun V10 17.5t Black G3r

Hobbywing XeRun V10 4.5T Black G3 7340kv - 30401102

Hobbywing XeRun V10 6.5T Black G3 5120kv - 30401109

Hobbywing Xerun V10 Brushless Motor G4r (2-3s) 13.5t Sensored 1:10

Hobbywing Xerun V10 Brushless Motor G4r (2-3s) 17.5t Sensored 1:10

Hobbywing Xerun V10 Brushless Motor G4r (2-3s) 21.5t Sensored 1:10

What comes in the box?
All editions come with

• XR10 PRO ESC G2 w/ a cooling fan
• 13AWG wires for flexible layout / lightweight
• (2) Input wires & (3) Output wires 
• (2) x cooling fan (comes with one back-up fan)
• Dual capacitors
• Decals
• Bonus parts: heat tubes, double tape, nylon cable zap traps

Edition package (P/N | SKU)	Electric  Blue (30112612)
Color
Wires	13 AWG (racing)
Secondary Extended power switch	Option (Not included)

Features:

• Upgraded 32-bit M4 microprocessors with more powerful processing capability guarantee stable control and rapid response. (Industry's highest 32-bit microprocessor, increased processing speed by X4)
• Peak current up to 1200A. (this is not a typo)
• Built-in switch mode BEC with a maximum output of 10A and voltage adjustable from 5V to 7.4V (step: 0.1V) for usage with servos & other devices require different voltages.
• Variable frequency regulation of PWM & brake frequencies allows users to precisely regulate the driving; braking forces (of the motors).
• Expanded range of the max. brake force brings in the active brake ranges from 101% to 150%.
• Softening function (HOBBYWING-initiated) for milder or wilder driving control and better driving efficiency.
• 10 select-to-use profiles applicable to all 1/10th RC car racing.
• Internal electronic key switch for long service life, high reliability; and the external switch port for connecting an external switch (included in the product box) is applicable to different situations.
• Separate PRG/FAN port is able to power an external fan to maximize cooling performance or connect an LCD program box or WiFi module to the ESC.
• With the New WIFI express module (purchase separately), users are able to program parameters, upgrade firmware and check relevant data during the event using either the iPhone or Android devices.
• Switchable motor direction (CCW/CW) for various chassis.
• Multiple protections come in standard
  • low-voltage cutoff protection
  • ESC and motor thermal protection
  • Fail-safe (throttle signal loss protection)
  • Reverse polarity protection*
• Data logging for recording the maximum ESC/motor temperature, motor speed/RPM, and others in real-time.
• Firmware upgrade via Hobbywing multifunction LCD program box or WiFi Express (item sold separately).

* The external standard cap pack will still be damaged if battery reversal occurs. For full protection, recommend using HOBBYWING SMT-MLCC capacitor banks (purchase separately)

Specifications

The XR10 JUSTOCK G3S ESC offers even more setting options and finer adjustment to Your own driving style than the regular Justock G3 controller. Developed specifically for races and training rides, both a 0 timing and an RPM limit of up to 88,000RPM are of course available. So get ready for a fair and successful race. Another new feature is that the motor can rotate clockwise or counterclockwise thanks to the Justock G3S ESC. With the equally adjustable BEC voltage, there are countless possibilities for combining the controller with the other electronics of an RC car. Also there are numerous safety functions such as reverse polarity protection, which ideally prevents damage caused by the battery being plugged in incorrectly by accident.

The Xerun series from Hobbywing exclusively includes sensor-based brushless systems for professional racing use. The product range extends from 1/12 scale to 1/8 as well as from Modified to Stock. The excellent performance, high reliability and several other features meet the high requirements of top-level drivers in all respects.

Features:

• Even more available parameters than the normal Justock G3 controller (smart fan, freewheeling, initial throttle force)
• Refined parameter options
• RPM limit of 10000RPM up to 88000RPM in 1000 steps (instead of only 25000 or 33500)
• Perfectly suited for competition thanks to the RPM-Limit and 0-Timing options
• Motor direction of rotation free choosable (CW or CCW)
• Adjustable BEC Voltage (6V or 7,4V)
• Robust aluminum housing for ideal heat dissipation
• Built-in capacitors
• Firmware upgrades possible to always be up to date
• Various protective functions:
  • Polarity reversal
  • Overheating
  • Undervoltage shutdown
  • Fail-safe
  • Motor lock-up

Technical Specifications:

Optional Accessories:

HW30502001 LCD Programming Box G2
HW30502002 LCD Programming Box Pro
HW30850400 OTA Programmer

Product information "Hobbywing Xerun XR10 Pro Brushless ESC Black 160A, 2-3s LiPo"

All the products in this series are sensored brushless power systems for professional races range from 1/12th scale to 1/8th scale, from Modified to Stock. Their excellent performance, reliable structure design and others definitely can meet top-level races strict requirements against products performance and quality.
The XR10 Pro is a real and maybe THE ESC for 1/10 competition use. Doesn`t matter if On-Road touring cars or Off-Road Buggies, the feeling and power with this ESC is amazing. With outstanding features like Data-logging Function, adjustable Throttle and Brake frequencies, powerful BEC and a max. const. current of 160A.

High Power Output
Continuous current of 160A and peak current of up to 1200A guarantees a stable and high power output during competitions.

Special Design for Top Racing
Reliable hardware combined with intelligent software (containing 10 common select-to-use profiles) creates an ideal power solution to 1/10th scale top touring car, Pan car and buggy racing.

Programming / Upgrading / Data reading wirelessly
With Hobbywings WiFi Express module and iPhone or an Android phone (with the HOBBYWING WiFi Link software installed), the user can remotely program parameters, upgrade firmware and check relevant data of the ESC without leaving the control stand.

Adjustable Throttle & Brake PWM Frequencies
Independent and adjustable throttle & brake PWM frequencies guarantee precise and accurate throttle and brake control for all classes of competitions (esp. the Stock class).

Efficient Heat Dissipating System
The aluminum casing and reticular heat sink combined with the HOBBYWING patented copper heat-conductive plates which are attached to the MOSFET board allows the internal heat to be quickly transferred to the heat sink for dissipation. With the high-performing detachable cooling fan, a highly reliable heat transfer system for maximum cooling is accomplished.

High current/voltage BEC
The built-in switch mode BEC with a maximum output of 4A and voltage adjustable between 6V and 7.4V allows the user to use various high voltage servos.

Separate Programming/Fan Port
The separate PRG/FAN port on the ESC can power an external fan for maximize cooling performance or connect the ESC to a LCD program box or WiFi module for ESC programming.

Advanced and Secure Electronic Switch
The XR10 Pro ESC features an electronic switch with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design.

Innovative data-logging Function
This ESC features the data-logging function which can record the maximum ESC/motor temperature, RPM and etc. in real time and allows the user to analyze the recorded data via a the LCD program box or WiFi module after each use.


Specifications

• Type
  • Scale: 1/10th
  • Brushed/Brushless: BL
  • Sensored/Sensorless: SD
  • Waterproof: No
• Specifications
  • Cont./Peak Current: 160A/1200A
  • Input: 2-3S LiPo / 4-9 Cell NiMH
  • BEC Output: Swich Mode: 6V / 7.4V max. 4A
• Wires & Connectors
  • Input Wires: Black-12AWG-200mm*2
  • Output Wires: Black-12AWG-200mm*3
  • Input Connectors: No
  • Output Connecotors: No
• Fan
  • Size: 25.0x25.0x10.0mm
  • Voltage Range: 5-7.4V
  • Powered by: Powered by BEC
• ESC Programing via
  • LCD Program Box: Supported
  • WiFi Module: Supported
  • Program Port: Separate Program Port
• Size & Weight
  • Size: 37.5x30.9x31.6mm(w/Fan & Fan Shroud)
  • Weight: 95g(w/ Wires)
• Applications
  • Motors: SL BL Motors / SD BL Motors
  • Vehicles: 1/10th Touring Car & Buggy & Drift Car & F1; 1/8th,1/10th Rock Crawler
  • KV Rating/T Count:
    • 2S LiPo/6S NiMH: (Touring Car) T=3.5T, (Buggy) T=4.5T.
    • 3S LiPo/9S NiMH: (Touring Car) T=6.5T, (Buggy) T=8.5T.

Product Comparison

Hobbywing Xerun Xr10 Pro Elite G2s

The XR10 Pro G2 ESC is designed for 1/10th and 1/12th RC car racing.

IT features a 32-bit microprocessor, built-in BEC with maximum current of 10A and voltage adjustable from 5 to 7.4v, battery-protection circuit, dual-switch control, adjustable maximum brake force (extended to 150%) and PWM & Brake frequencies and Turbo increase & decrease rates, and switchable motor direction (CCW/CW)

Upgraded M4 Microprocessor (32-bit) for
Professional Racing

High-performance 32-bit M4 microprocessor is implemented in the XR10PRO G2 for Super-fast and precise processing of complicated data operations, this allows the ESC to have a very rapid and precise response with extraordinary potential to optimize and extend its functions further. The XR10 PRO G2 is an exceptional piece of Hardware combined with accurate and powerful software makes this ESC into a “Precise weapon” for high end professional racing.

Internal Battery-Reverse Polarity Protection Circuit

With the Built-in Reverse Voltage Protection circuit, ESC's internal parts are all protected from Cross Connection of battery power. 
(Note: the overall power system will be protected from damage when non-polarized filter capacitors are used; the standard electrolytic (external capacitors ) supplied for this ESC have no reverse polarity protection, so the capacitors (only) ,not the ESC will be damaged  when reverse polarity installation occurs.)

Innovative Dual-Switches / Removable External Switch

Internal electronic switch & external removable switch for easy and convenient  usage. The internal switch simplifies wiring while the external switch solves the issue “it’s hard to reach the built-in switch when the car body is mounted on or  inner chassis placement of ESC”. External switch is perfect for off-road applications. (Warning! This is Hobbywing’s registered patented)

Updated Drive, and Brake PWM Frequency

Drive PWM:1-32KHz
Brake PWM:0.5-16KHz

Tunable Turbo Increase & Decrease Rates

More fine tunable values have been implemented for Turbo Increase & Decrease Rates which allows the end user to fine tune the turbo for optimal performance when racing at different size tracks .

Switchable Motor Direction

Switchable motor direction: CCW & CW for various chassis.

Super Internal BEC

Built-in switch mode BEC with a maximum output of 10A and voltage adjustable from 5V to 7.4V (step:0.1V) for usage with high voltage servos.

Softening Function (Hobbywing’s Patented Technology)

Softening function implemented in this ESC allows user to fine-tune the bottom end allowing for maximum controlled power of vehicles used in Modified class racing applications.

Programming/Upgrading/Data Reading Wirelessly

With Hobbywing’s “WiFi Express” module and iPhone or an Android phone (with the Hobbywing WiFi Link App installed), users can remotely program parameters, upgrade firmware and check relevant data of the ESC without leaving the control stand.

Data-logging Function

This ESC features the data-logging function which can record the maximum ESC/motor temperature, RPM and etc. in real time and allows users to check those data via a LCD program box or WiFi module after each use. In the future, new (ESC) firmware will not only record the maximum temperatures, RPM and others but also provide complete operation (status) curve for users.

Hobbywing Xerun XR10 Pro G2S

Hobbywing Xerun XR10 Pro G3 Brushless ESC 160A, 2s LiPo

The Hobbywing XeRun XR10 Pro G3 sets new standards for competition ESCs and raises the performance level with many innovative features. Compared to its predecessor, the XR10 Pro G2S, the ESC is now equipped with a frameless and improved fan. Additionally, the optimized LCG design has reduced the height by 2 mm, leading to a lower center of gravity and improved vehicle balance. Moreover, the XR10 Pro G3 features an integrated data logging module that can store up to 19 data sets of 20 minutes each, eliminating the need for a constant connection to the OTA Bluetooth module.

In addition to the integrated data logging, the G3 comes with many interesting new features! The freewheeling function ensures more efficient cooling by noticeably lowering the operating temperature compared to its predecessor. The new Disc Brake Mode allows extremely precise and linear brake force control, making braking consistent and controllable across all speeds. With over 44 programmable parameters and two adjustment levels, the settings can now be better tailored to any situation.

Features:

• Integrated data logging (OTA/LCD required for analysis)
• Optimized temperature control
• Disc Brake Mode for precise brake control
• 44+ parameters
• Softening 2.0
• LCG design and optimized wiring
• Built-in reverse polarity protection
• Optimized for modified competitions

Technical Data:

Accessories (optional):

HW30502001 LCD programming box
HW30850400 OTA programming module

•  Do you have any questions concerning this product?
•  Further products by Hobbywing

Hobbywing Xerun XR10 Pro G3X Brushless ESC 160A, 2s LiPo

The Hobbywing XeRun XR10 Pro G3X sets new standards for competition ESCs and raises the performance level with many innovative features. Compared to its predecessor, the XR10 Pro G2S, the ESC is now equipped with a frameless and improved fan. Additionally, the optimized LCG design has reduced the height by 2 mm, leading to a lower center of gravity and improved vehicle balance. Moreover, the XR10 Pro G3X features an integrated data logging module that can store up to 19 data sets of 20 minutes each, eliminating the need for a constant connection to the OTA Bluetooth module.

In addition to the integrated data logging, the G3X comes with many interesting new features! The freewheeling function ensures more efficient cooling by noticeably lowering the operating temperature compared to its predecessor. The new Disc Brake Mode allows extremely precise and linear brake force control, making braking consistent and controllable across all speeds. With over 44 programmable parameters and two adjustment levels, the settings can now be better tailored to any situation.

Compared to the G3 standard version in black, the G3X delivers a more aggressive power output and comes standard with 12AWG wires and no reverse polarity protection.

Features:

• Integrated data logging (OTA/LCD required for analysis)
• Optimized temperature control
• Disc Brake Mode for precise brake control
• 44+ parameters
• Softening 2.0
• LCG design and optimized wiring
• Optimized for stock competitions

Technical Data:

Accessories (optional):

HW30502001 LCD programming box
HW30850400 OTA programming module

Hobbywing XeRun XR10 PRO STOCK SPEC 1S Sensored Brushless ESC (Black) 80A

Hobbywing Xerun Xr10 Pro-ext Sw-black, 160a

Hobbywing Xerun XR8 Plus Brushless ESC 150A, 2-6s LiPo, BEC 6A

Great Flexibility & Versatility
The ESC has the strong outbreak and the stable, continuous output; so it can meet those stringent requirements for power systems raised by professional races. Besides, the ESC provides the driver with more programmable items and parameter options when he is programming ESC, so it can bring the excellent control feel to him in occasions that require too much for the throttle/brake linearity.

High Reliability
With several years of continuous improvements to the products core technology, XR8 has the more powerful hardware and more perfect software that its predecessor doesnt have. Reliable hardware combined with advanced software allows XERUN XR8 ESC to not only provide extremely "aggressive" output but also protect itself timely from damage caused by overload. This significantly reduces the possibility of getting ESC damaged by heavy load and improves the reliability and durability.

Automatic Mode Switching
The ESC will automatically switch the drive mode between sensored mode and senseless mode base on the real-time running status of the motor sensor and ESC, to guarantee the normal operation of the power system and avoid forced withdrawal from race because of abnormal sensor signals.

Dynamic Timing Control Program
The worlds 1st 1/8th scale ESC adopted the dynamic timing technology which has made a hit in 1/10th scale on-road field, greatly broaden the adjustable output range of competition power systems. It increases the power output and also cares about the systems efficiency.  (Note: currently, the pure sensored dynamic timing technology is only applicable to 2 pole motors and you also need setting the ESC to "pure sensored" running mode.)

Advanced and Secure Electronic Switch
The electronic switch with the lifespan of over 50000 times of switching on & off features a completely waterproof, dust-proof and shock-resistant design, completely solved problems like stuck reed and rust contact points caused by dust and moisture, switching off automatically caused by violent dash (like landing after flying over slopes) conventional mechanical switches often have, guarantees the driver a safe and complete race.For perfectly matching the mounting holes on TRAXXAS chassis, we have added some mounting holes to the ESC case accordingly.

Super Built-in BEC
The worlds 1st 1/8th scale ESC adopted the super built-in BEC with the max. output current of up to 15A and switchable output voltage
(6V/7.2V). It can drive different servos, high voltage servos at ease, so drivers can control the movements and directions of their vehicles precisely and freely.

Reliable Cooling System
The power board inside the ESC is covered with HOBBYWING patented heat-conductive copper bar, which helps to conduct the internal heat quickly to the CNC machined aluminum heatsink housing. In addition, the fan has also adopted the special anti-shock design, reduced damage brought by frequent jumps of the vehicle. So a highly reliable cooling system is built to ensure the ESC always works in the optimal cool condition.

Almost Maintenance Free
The whole ESC except the cooling fan is basically maintenance free. You only need to detach the fan shroud if you want to replace the fan. Youre free from the trouble of opening the integrated heatsink housing, so the whole process becomes simple and efficient.

Aluminum Heatsink Housing (Top) & Anti-shock Fan
The integrated, CNC machined billet aluminum heatsink housing combined with the anti-shock fan ensures that XERUN XR8 can always function at the best cooling state.

Technical Data:

• Cont./Peak Current: 150A/950A
• Motor Type:
  • Sensored Brushless
  • Sensorless Brushless
• Applications: 1/8th Touring Car, Buggy, Truggy and Truck w/ High-end Configuration (for Race)
• Motor Limit Brushless:
  • 4S LiPo/12S NiMH: KV=3000 (4274 Size)
  • 6S LiPo/18S NiMH:KV=2400 (4274 Size)
• LiPo/NiMH Cells:
  • 6-18S NiMH
  • 2-6S LiPo
• Resistance: 0,0002 Ohm
• BEC Output: 6V/7.2V with 6A (Switching Mode)
• Cooling Fan: Yes (Power by built in BEC)
• Size (LxWxH): 58.7 x 48 x 36.9mm
• Weight: 127g (w/o Wires)
• Programming Port: FAN/PRG Port
• ESC Programming: LCD Program Box

Hobbywing XERUN XR8 Pro G2S 200A 1/8 Buggy/On Road CompetitionHW30113304

Hobbywing Xerun Xr8 Pro G3 Brushless Esc 200a, 2-4s Lipo, Bec 6a

Hobbywing Xerun Xr8 Sct 1/8 & 1/10 Esc, 140a, Hw30113301

Sf-2 Servo (High Torque/6.5kg-Cm 6.0v)

HUDY ALU RC FAN 30MM - BOTTOM MOUNT 2 HOLE

HUDY ALU RC FAN 30MM - SIDE MOUNT 2 HOLE

HUDY ALU RC FAN 30MM - TOP/SIDE MOUNT 4 HOLE

HUDY BRUSHLESS RC FAN 30MM - WITH INTERNAL SOLDERING TABS

Infarood termometer gun black

mooie tool voor asfalt of motoren te meten een must voor onze hobby.

Gepatenteerde laserzooeker & smartsensor technologie voor een snelle responstijd en hoge nauwkeurigheid van de meting!
Automatisch uitschakelen spaart de levensduur van de batterij.
Lichtgewicht en compact design voor een ultiem gebruiksgemak!
Eenvoudig de meting aflezen van het LCD scherm mét backlight!
Breed meetbereik van minus 50 tot 380 graden Celcius!
Inclusief retail verpakking en uitgebreide gebruiksaanwijzing en inclusief 2x AAA batterij)!

Specificaties:
Voeding - 2x AAA batterijen (inbegrepen),
meetbereik -50 ° C tot + 380 ° C (-58-716 ° F)
nauwkeurigheid 0-380 ° ± 1,5 ° C of ± 1,5% -50 ° C-0 ° C ± 3,0 ° C,
0,1 ° C,
Resolutie: 0,1 ° C / 0,1 ° F
Herhaalbaarheid: 1%> ± 1 ° C
Ractietijd: <500 ms
Werktijd laserpointer: Tot 12 uur
Afmetingen 153x101x43 mm

A special LiPo battery from Intellect for the SANWA MT-44 transmitter.

Specifications

3.7v
3000mAh
53g
60 x 45 x 10mm

New for 2022 are Intellect's PT2 series range of awesome LiPo's. Metallic green lettering distinguishes them for 2022. 2 years of technological improvement for the 2022 versions see's improvements in power and runtime in the same size cases.

Huge range of batteries for all applications and required weights for perfect chassis balance and centre of gravity. All the batteries have a burst current of 120C and have LIHV technology.

As always with Intellect LiPo's they are excellent value for money.

BRCA/EFRA legal as of April 1st 2022.

Includes balance charge leads and connectors. 152g Long Runtime - LMP12, GT12.

Specifications: