info

You have reached the minimum number

Shopping cart (0)

There are no products in your shopping cart yet.

Toebehoren div

Display:
  32 / 41  



Loading...
SCHILDERPENCEEL-MIDDEL --FIJN-MMC

Quick view

(0)
In stock
SCHILDERPENCEEL-MIDDEL --FIJN-MMC

SCHILDERPENCEEL-MIDDEL --FIJN-MMC

(0)
€ 1,75

SCHILDERPENCEEL-MIDDEL --FIJN-MMC

Schokdemper Pits Houder V2 Zwart

Quick view

(0)
In stock
Schokdemper Pits Houder V2 Zwart

Schokdemper Pits Houder V2 Zwart

(0)
€ 9,95

Productinformatie "Schokdemper Pits Holder V2 Zwart"

Dit multifunctionele talent van Robitronic wordt voornamelijk gebruikt als hulpmiddel bij het vullen van schokdempers - ideaal voor de schaal 1/10.

De standaard bestaat uit 9 afzonderlijke onderdelen die alleen maar in elkaar gestoken hoeven te worden. Aan de onderkant bevindt zich een praktisch magneetbord voor schroeven, splitpennen en dergelijke. Hiervoor biedt de standaard 12 gaten die moeten worden opgevuld, met 4 extra stangen, voor het ophangen van bijv. veren.

De vier gaten op de bovenverdieping hebben een diameter van 18,4 mm, de bovenrand van de bovenverdieping meet ca. 96 mm tot de vloer. De gaten op het onderste niveau zijn conisch naar beneden en hebben een diameter van 17 mm en zijn verkleind tot 14,2 mm. De bovenrand meet ca. 72 mm tot de vloer wpp En met de 4 statieven die aan de zijkant kunnen worden geopend, heb JIJ nog meer ruimte beschikbaar. Ook hier worden conische gaten (14,2 mm-12,5 mm) geboord.

Technische specificaties:

  • Dikte van de kunststof onderdelen 3,5 mm
  • De golfvormige (laterale) insnijdingen op de bovenverdieping zijn ca. 4 mm breed
  • Het magnetisch veld meet ca. 27 mm x 84,5 mm
  • Afmetingen (H x B x D): ca. 100 x 141 x 68 mm
Levering:
Demperstandaard + magneetbord (zonder demper)

Screw Driver Set Phillips & Flat Head

Quick view

(0)
Out of Stock
Screw Driver Set Phillips & Flat Head

Screw Driver Set Phillips & Flat Head

(0)
€ 19,95

Hoogwaardige set van 4 schroevendraaiers in kruis- en sleufvorm en in een nobel ontwerp. De volgende maten zijn inbegrepen: -3.0, -4.0, +3.0, +5.0.

Technische specificaties

Grootte (handvat): 90,6x18,7 mm
Lengte (bijlage): 81,5 mm
Gewicht (alle): 130g

secondelijm dik

Quick view

secondelijm dik

€ 3,95
(0)
Out of Stock
secondelijm dik

secondelijm dik

(0)
€ 3,95

  • Inhoud 20ml
  • Viscositeit dik
  • Hart zeer snel uit
  • Geschikt voor hout, rubber, kunststof en metaal
  • Universeel bruikbaar

EAN: 4042774150228

secondelijm dun 20gr

Quick view

(0)
In stock
secondelijm dun 20gr

secondelijm dun 20gr

(0)
€ 3,95

  • Inhoud 20ml
  • Viscositeit dun
  • Hart  zeer snel uit
  • Geschikt voor hout, rubber, kunststof en  metaal
  • Universeel bruikbaar

Artikel nummer: 806031

Secondelijm middel dik 20 gram

Quick view

(0)
In stock
Secondelijm middel dik 20 gram

Secondelijm middel dik 20 gram

(0)
€ 3,95

 

  • Inhoud 20ml
  • Viscositeit middel
  • Hart zeer snel uit
  • Geschikt voor hout, rubber, kunststof en metaal
  • Universeel bruikbaar

Set Dopsleutel 4.0 / 5.5 / 7.0 / 8.0mm

Quick view

(0)
Out of Stock
Set Dopsleutel 4.0 / 5.5 / 7.0 / 8.0mm

Set Dopsleutel 4.0 / 5.5 / 7.0 / 8.0mm

(0)
€ 19,95

Hoogwaardige set van 4 dopsleutelschroevendraaiers in een nobel ontwerp. De volgende maten zijn inbegrepen: 4.0, 5.5, 7.0, 8.0.

Specificaties

Grootte (handvat): 91x18,5mm
Lengte (bijlage): 78 mm
Gewicht (totaal): 170 g

Set zeshoekige aansluiting 1.5 / 2.0 / 2.5 / 3.0mm

Quick view

(0)
Out of Stock
Set zeshoekige aansluiting 1.5 / 2.0 / 2.5 / 3.0mm

Set zeshoekige aansluiting 1.5 / 2.0 / 2.5 / 3.0mm

(0)
€ 19,95

Hoogwaardige set van 4 zeshoekige schroevendraaiers in een edel ontwerp. De volgende maten zijn inbegrepen: 3.0, 2.5, 2.0, 1.5.

Specificaties

Grootte (handvat): 90x18,7mm
Lengte (bijlage): 83 mm
Gewicht (totaal): 120g

Setup system (Blue) with Carrying Bag skyrc

Quick view

(0)
Out of Stock
Setup system (Blue) with Carrying Bag skyrc

Setup system (Blue) with Carrying Bag skyrc

(0)
€ 124,99

This setup system is made to adjust camber, toe, steering and caster angles on your RC car with accuracy. A carryinh bag is also supplied. Color : Blue.

SHIMS 5 X 8 X 0.1 - PK10

Quick view

(0)
In stock
SHIMS 5 X 8 X 0.1 - PK10

SHIMS 5 X 8 X 0.1 - PK10

(0)
€ 5,95

SHIMS 5 X 8 X 0.1 - 10 STUKS

SHIMS 8 X 11 X 0.2 - 10 STUKS

Quick view

(0)
In stock
SHIMS 8 X 11 X 0.2 - 10 STUKS

SHIMS 8 X 11 X 0.2 - 10 STUKS

(0)
€ 5,95

SHIMS 8 X 11 X 0.2 - 10 STUKS

Short type Nut Driver 7.0mm for Professional Electric Power Drive

Quick view

Short type Nut Driver 7.0mm for Professional Electric Power Drive

Short type Nut Driver 7.0mm for Professional Electric Power Drive

(0)
€ 8,95

Short type Nut Driver 7.0mm for Professional Electric Power Drive

Silicon Warming Cup-SKY600064-07

Quick view

(0)
In stock
Silicon Warming Cup-SKY600064-07

Silicon Warming Cup-SKY600064-07

(0)
€ 22,95

SKY RC DIGITAL CAMBER GAUGE

Quick view

(0)
Out of Stock
SKY RC DIGITAL CAMBER GAUGE

SKY RC DIGITAL CAMBER GAUGE

(0)
€ 49,95

Camber and Toe Gauge Gets Bluetooth
With a nonstop passion for RC car racing, SkyRC upgraded its mechanical predecessor with Bluetooth.
The must-have RC Gears app definitely brings smartness to this gauge. Now our racers can measure the RC car's camber and toe angle and read the data on the phone and on the fly!
RC suspension tuning made easy and smarter!

Watch your Toes & Camber
When it comes to RC grade racing, so many adjustments can contribute to the handling and performance of the vehicle.
Adjusting Camber and Toe are vital adjustments to affect how your touring car performs on the straights and the turns.
Toe In/Toe Out can be adjusted to increase or decrease steering and steering response.

Camber is the relationship of the tire to the ground, such that a tire that is perpendicular to the racing surface has zero camber. If the top of the tire leans in toward the car, it has negative camber; likewise, a tire that leans outward at the top has positive camber. Most RC touring cars will benefit from a negative camber degree, resulting in a slightly wider width and more static tire grip on the track surface, benefiting the turns and reducing roll-overs.

Wheels Setup is a breeze now
On your setup wheels, in your race wheels, or next to your setup station, CTG-015 will give you incredibly accurate readings on the camber angle of your wheels.
The toe-tuning and camber-adjusting allow you to achieve your perfect tire wear and traction point.
This accurate gauge allows you to tweak your camber and camber gain settings, finding peace of mind that you are following a precise, replicable and trustworthy measurement tool.
All data can be read and kept on the phone!

High Accuracy
The data tested by the gauge has high reliability and accuracy. The measurement is accurate up to 0.2 degrees, bringing a better experience to our racers.

Accuracy Meets Craftsmanship
High-hardness aluminum is selected for the case, and strict CNC machining guarantees the stability and reliability that is dust-proof and has strong impact resistance.

Bluetooth 5.0
Faster & More Stable
SkyRC CTG-015 Digital Camber Gauge is built with Bluetooth 5.0, which enables a faster and more stable connection. The app instantly displays real-time data once connected.

Everything is connected
Camber & Toe Gauge has its own app finally!
The app receives and records the races' angle data in real-time via Bluetooth!
Angular adjustment is made easy!

Small & Portable
SkyRC Camber & Toe Gauge is even smaller than half iPhone 13 in size, convenient to carry around.
Universal Charging Port
The charge port is USB Type-C which is accepted as the de facto connector today, so most mobile phone cables can easily handle the charging.

How to achieve toe measuring?
1. Hold the car kit vertically on the setup station
2. Hold the gauge against the wheel, and read the value through the app, with peace of mind achieving a very accurate measurement of toe-in and toe-out.

Size and Weight
Dimension: 45x12x80mm
Weight: 53g

Working Data
Input Voltage: 5V
Input Current: 200-300mA
Interface: Type C
Battery Type: 3.7V LiPo
Battery Capacity: 200mAh
Working Voltage: 3.4-4.2V
Working Current: <10mA
Low-voltage Protection: <3.4V (Flashes Red)
Measuring Range: ±17.5°
Measuring Accuracy: ±0.2°
Working Temperature: 0℃-50℃
Working Humidity: 5%-90% (None-condensation)
Storage Temperature: -10℃-50℃
Storage Humidity: 1%-75% (None-condensation)

Includes usb/micro usb charging cable.

The Sky RC app is available from the App Store or Google Play.

*Unlikely to fit 1/10th Off Road cars if wheel and tyre is used and mounted, but it would depend on the wheel/tyre combo used. This is due to the clearance of the nut and gauge.*

SKY RC TIRE WARMER MAT FOR 1/8 1PR (SK-600064-03)

Quick view

(0)
Out of Stock
SKY-600069-15/CHASSIS DROOP GAUGE 4.0 TO 6.6MM BLACK

Quick view

(0)
Out of Stock
SKY-600069-15/CHASSIS DROOP GAUGE 4.0 TO 6.6MM BLACK

SKY-600069-15/CHASSIS DROOP GAUGE 4.0 TO 6.6MM BLACK

(0)
€ 13,95

SKY-600069-15/CHASSIS DROOP GAUGE 4.0 TO 6.6MM BLACK

SKY-RC CHASSIS DROOP GAUGE -3 TO 10MM BLACK

Quick view

(0)
In stock
SKY-RC CHASSIS DROOP GAUGE -3 TO 10MM BLACK

SKY-RC CHASSIS DROOP GAUGE -3 TO 10MM BLACK

(0)
€ 15,95

SKY-RC CHASSIS DROOP GAUGE -3 TO 10MM BLACK

SKY-RC CHASSIS DROOP GAUGE SUPPORT BLOCKS BLACK

Quick view

(0)
Out of Stock
SKY-RC CHASSIS DROOP GAUGE SUPPORT BLOCKS BLACK

SKY-RC CHASSIS DROOP GAUGE SUPPORT BLOCKS BLACK

(0)
€ 15,95

CHASSIS DROOP GAUGE
SUPPORT BLOCKS

SKY-RC CHASSIS RIDE HIGHT GAUGE 3.8-7.0MM BLACK

Quick view

(0)
Out of Stock
SKY-RC CHASSIS RIDE HIGHT GAUGE 3.8-7.0MM BLACK

SKY-RC CHASSIS RIDE HIGHT GAUGE 3.8-7.0MM BLACK

(0)
€ 13,95

SKY-RC CHASSIS RIDE HIGHT GAUGE 3.8-7.0MM BLACK

SKY500037-021 Thermometer

Quick view

(0)
In stock
SKY500037-021 Thermometer

SKY500037-021 Thermometer

(0)
€ 39,95

Now you can take temperature measurement at a safe distance with SkyRC. RC hobbyists will never get burned or air blowing in your face from the RC vehicles, engines, motors, chargers, etc., while taking measurements.
You can trust SkyRC  to get accurate temperature readings from a safe distance, wherever indoor or outdoor.
SkyRC has engineered the ITP380 temperature measuring with accuracy down to the 0.1 °F and the object temperatures ranging from -40°F (-40°C) to 716°F (380°C).

  30 31  32  33 34  


Recently viewed products

This website uses cookies to measure the number of visitors. We do not store any personal information.
Accept selected cookies Reject cookies