There are no products in your shopping cart yet.
Other Brands
Loading...

Soldeerbout 100W / 220V
Soldeerbout 100W / 220V
oldeerbout 100W / 220V
- Vermogen 100W
- 220 Volt
- Word ca. 500°C warm

Sorex Glued 40R + Yellow + Stiff Light Pk4 - Euros
Sorex Glued 40R+Yellow+Stiff Light Pk4-Euros 2014
Great combo for high grip or big traction tarmac surfaces. Built with the 40R tyre, with a yellow insert and stiff light wheel.
Schumacher Racing have an automated in house gluing process which accurately controls the glue flow rate and quantity. This has helped us to establish an excellent reputation for quality and consistency of pre-glued tyres. However, the driver should check that the tyres are firmly glued before each race.

SPE36VR2 RUSH JAPAN NATS CONTROL TYRE
RUSH RC Tyres as used at the 2017 Japan Nationals. Pre-mounted and expertly glued with a medium moulded insert. The SPE36VR2 is a hardwearing and consistent tyre good for many runs without such significant drop off compared to other brands. Best practice to use thin carpet style additives with higher than normal warming temperatures before the run.

Spider Grip Aqua Additive for Foam Tires Carpet / Asphalt 125ml
Spider Grip Aqua Additive for Foam Tires Carpet / Asphalt 125ml
Spider Grip Aqua Additive for Foam Tires Carpet / Asphalt 125mlSpider Grip Aqua is ontwikkeld in samenwerking met wereld- en Europese kampioenen om het hoogste niveau van grip te bieden met een ongekende duurzaamheid van start tot finish. Spider Grip Aqua is zorgvuldig geformuleerd om de levensduur van de band te verlengen en hoewel Spider Grip de tractie biedt die kampioenen nodig hebben, helpt het ook de bandenslijtage te verminderen.
Het is een ideaal gripmiddel voor sponsrubber banden op tapijt en asfalt.
Als je sneller aan de race wilt beginnen en op zoek bent naar een balans in grip tussen Spider Grip Blue of Green, dan is "Aqua" misschien wel het juiste gripmiddel voor jou.





SRT BH8015 Low Profile (0.055s/13.0kg/7.4V) Brushless Servo
SRT BH8015 Low Profile (0.055s/13.0kg/7.4V) Brushless Servo

SRT Capacitor for BEC 2200uf/10VSRT
roduct information "SRT Capacitor for BEC 2200uf/10V"
Whenever voltage dips and peaks are a problem, this capacitor with 2200uF/10V is the solution. It improves the voltage stability of the receiver and prevents short-term voltage drops that can be caused, for example, by peak loads from high-quality servos. The stored energy is used to bridge such drops. With reverse currents from servos, however, so-called voltage peaks can sometimes occur. The capacitor can filter out and cushion these high-frequency signals just as easily.
The capacitor is plugged into a free receiver slot.
Length: | 25mm |
Diameter: | 12.7mm |
Cable Length: | 60mm |
Weight: | 5g |


