Tamiya Shaft Steel 44mm #54078

T3-01 Grub screw 3x12mm MB6 VE2

TA06, XV-01 Gear Diff Unit

- Gear Diff Unit, kegeltandwielset diff.

Tamiya nummer: 51460

RC TA07 de Brug van de middenas
Dit brugdeel past op de middenas (BB21) en tegenpoelie in de 1-snarige aandrijflijn van de TA07. Wanneer het is gemonteerd, vermindert het de buiging van de middenas en fungeert het als een eenvoudige riemspanningsregelaar. Door dit Hop-Up Option-onderdeel te gebruiken, hoeft u de plastic tandwielafdekking niet te gebruiken.
-Stalen middenasbrug x1
-840 kogellager x1
-Kleine onderdelen voor bevestiging inbegrepen.
-Alleen compatibel met auto's met TA07-chassis.
 

TAMIYA TA07 Carbon Stiffener (Center)
TA07 Carbon Stiffener (Center)
Increase your setup options for the TA07 PRO chassis with this 2mm thick carbon fiber center stiffener. This lightweight and rigid part fits neatly onto the center brace and rear stiffeners for more rigidity and stiffer pitch damping.
Item Contents
•Carbon Fiber Stiffener (Center) x1
•Screws for attachment included.
•This item pairs perfectly with carbon fiber front (Item 54788) and rear (Item 54789) stiffeners.
•Compatible with TA07 PRO chassis cars.
 

Tamiya 22016 TA08 LF King-Pin Kogels (4)

Artikelnummer: T22016
EAN: 4950344220168

- TA08 lage frictie king pin kogels x4
- Te gebruiken in plaats van 7mm ophangkogels en king pins.
- Aluminium onderdelen (in plaats van standaard staal) met een hard geanodiseerde afwerking voor meer stijfheid.
- Een king pin kogel geeft een gewichtsbesparing van ongeveer 0,4 gram, wat helpt de onafgeveerde massa te verminderen, voor betere prestaties.
- Kan zowel vooraan als achteraan gebruikt worden. (Er zijn twee sets nodig om één kit volledig af te stellen.) Gebruik één king pin kogel bovenaan en onderaan voor elke staander.
- Wanneer u deze Hop-Up Optie gebruikt, wordt aanbevolen om de nieuwe items 51663 (TC-01 C/D Parts (Suspension) (2st.)) en 51669 (TA08 D Parts (Suspension Arms) 2st.) aan te schaffen.
- Compatibel met de TC-01 en TA08 PRO (item 58693) chassis auto's.

TAMIYA Tappingscrew 3x12mm (4)

This useful crossmember piece is crafted from carbon fiber material. It will reduce “wobble” experienced in the body mount pieces, which helps keep your car more stable through corners.

• Carbon Body Mount Crossmember (Front) x1
• O-Rings x2
• 6mm Snap Pins x4
• The design features two holes allowing attachment of a transponder in different positions.
• Compatible with TA07, TB-04, TRF419 chassis machines.

TC-01 A Parts (Body Mounts) (2)

These are carbon fiber chassis stiffeners for use on the Tamiya TC-01 chassis. The parts expand your chassis flex tuning options. They are ideal to use when driving on high-grip surfaces and also ideal when looking to achieve sharper driving feel.

• Carbon Front Stiffeners x2
• These components connect the front cover with the chassis, raising chassis rigidity.
• Parts are crafted in highly rigid and lightweight carbon fiber.
• Compatible with TC-01 chassis cars.

These rocker arm posts replace the stock Tamiya TC-01 chassis posts, which will reduce overall weight to your machine.

• Aluminum Rocker Arm Posts x4
• These are precision, lightweight aluminum parts, which lighten the chassis by nearly 2 grams.
• Components have a hard-anodized finish for durability.
• Compatible with TC-01 chassis cars.

The steering arms found in the TC-01 chassis are made out of plastic. This upgraded version is made of machined aluminum which changes the steering feel of your car and provides smoother operation. Use the upgraded part for a sharper handling feel.

• Aluminum Steering Arms Left & Right x1 each
• These precision, lightweight aluminum parts can be used in place of the kit-standard plastic components T4 and T7. They give secure attachment, as well as direct steering feel and superior durability.
• Tamiya blue anodized finish.
• Recommended for use with the aluminum steering bridge in Item 54957.
• Compatible with TC-01 chassis cars.
• Ball bearings are not included. 850 (8x5mm recommended)

The steering bridge found in the TC-01 chassis is made out of plastic. This upgraded version is made of machined aluminum which changes the steering feel of your car and provides smoother operation. Use the upgraded part for a sharper handling feel.

• Aluminum Steering Bridge x1
• This precision, lightweight aluminum bridge can be used in place of the kit-standard T9 plastic part. It boosts overall chassis rigidity and smooths out handling.
• Tamiya blue anodized finish.
• Recommended for use with the aluminum steering arms in Item 54958.
• Compatible with TC-01 chassis cars.

This Hop-Up Option is for use with the TC-01 chassis, and helps to contribute to improved suspension feel. Compared to the standard plastic parts, these parts have less flex which contribute to more direct feel from the suspension.

• Aluminum Rocker Arms x2
• Lightweight and rigid aluminum arms can be used in place of kit-standard plastic components, boosting damper performance and improving suspension feel.
• Parts have Tamiya blue anodized finish.
• Compatible with TC-01 chassis cars.
• Requires TWO sets to compete one car with front and rear rocker arms.

These are the C/D spare parts for the TC-01 chassis. They feature suspension arm, knuckle and rocker arm components among other useful spares.

These are the C/D spare parts for the TC-01 chassis. They feature suspension arm, knuckle and rocker arm components among other useful spares.

TC-01 Carbon Battery Holders

Item Contents/Information:
- TC-01 Carbon Battery Holders x2
- Used in place of kit-standard plastic A11 parts, these 3mm thickness carbon fiber components are a rigid and lightweight (3.6g for one set) option.
- Removal of a pin is all that is required to release the battery pack.
- Compatible with TC-01 chassis cars.

This useful crossmember piece is crafted from carbon fiber material. It will reduce “wobble” experienced in the rear body mount pieces, which helps keep your car more stable through corners.

• Carbon Body Mount Crossmember (Rear) x1
• O-Rings x2
• 6mm Snap Pins x4
• Two-hole positions allow you to use this item on both TRF419 wide post set ups, and narrower TA, TB and FF chassis machines post set ups.
• Compatible with TC-01, TA07, TB-04, FF-03, TRF419 chassis.

These are carbon fiber chassis stiffeners for use on the Tamiya TC-01 chassis. The parts expand your chassis flex tuning options. They are ideal to use when driving on high-grip surfaces and also ideal when looking to achieve sharper driving feel.

• Carbon Front Stiffeners x2
• These components connect the front cover with the chassis, raising chassis rigidity.
• Parts are crafted in highly rigid and lightweight carbon fiber.
• Compatible with TC-01 chassis cars.

This Hop-Up Option is for use with the TC-01 chassis. It helps to contribute to more efficient drive-line efficiency compared to using the kit standard dog-bone set up.

• Crafted in durable and rigid steel, this component can be used in place of kit-standard dog bone and cup parts, which provide true rotation at a range of angles for free, efficient power.
• Compatible with TC-01 chassis cars.
• Please note that this set contains parts to assemble one shaft. Two sets are required to complete the upgrade from front to rear.