There are no products in your shopping cart yet.
Toebehoren div
Loading...






4-Channel Radio "CR4S" 2.4GHz incl. 2 Receiver ABSIMA
e "CR4S" is a 4-channel remote control including 2 receivers, which uses the latest AFHDS 2.4GHz "ANT" frequency hopping technology from ABSIMA.
Lightweight and compact design, as well as comfortable and ergonomic shape. In addition, the remote control has a "beginner mode" and is therefore also suitable for pilots with less experience and also children.
The included receivers have a very compact design with a size of 30.2*18.0*13.0mm and fit in almost every receiver box.
FEATURES
Description of the channels (the transmitter has 4 channels which are assigned as follows):
CH1: Steering wheel
CH2: Throttle lever (Trigger)
CH3: 3-position toggle switch
CH4: Push button
Reverse function (REV): This function can be used to set the direction of rotation of the steering servo/motor.
Trimming (TRIM): Adjustment of the straight run and throttle neutral position.
Dual Rate function (D/R): The steering angle and also the motor rotation power can be increased or reduced by operating this rotary knobs.
Failsafe function: This function determines what the receiver should pass on if the signal to the transmitter is lost (e.g. emergency braking).
Beginner modus: This function is intended for newcomers. In this mode the motor power is automatically reduced to 50%.
SPECIFIKATION
Radio CR4S:
Channels: 4
2.4GHz Protocol: ANT
Distance: >150m
Battery (not included): 4*AAA 1.5 - 6V DC
Low V Warning: <4.2V (only NiMH)
Using LiPo TX battery possible: Yes (only LiPos with built-in low V protection)
Charging interface: No
Antenna type: Single antenne
Temperatur range: -10°C - +60°C
Dimension (L(W/H): 150*100*210 mm
Weight: ca. 130 g
Receiver R4WP Micro (2020016):
Channels: 4
Antenna type: external single antenna
Waterproof: Yes
Power: 3.5-8.4V
Failsafe: Yes (in connection with radio)
Temperatur range: -10°C - +60°C
Weight: 5 g
Size: 30.2*18.0*13.0 mm
SET INCLUDES
1* 4-Channel radio "CR4S"
2* 4-Channel receivers
1* Antenna tube
1* Manual (DE/ENG/FR)

42246 TRF Sticker C (Mirror Finish Border / Black)
42246 TRF Sticker C (Mirror Finish Border / Black)

42249 TRF Aluminium Servohevel Sanwa/Kopro Serviceartikel
42249 TRF Aluminium Servohevel Sanwa/Kopro Serviceartikel

5 X DIAMOND FILES - 140MM
14cm diamond coated needle files with plastic handle covers. Longer lasting and faster working than conventional files

50826 Masking tape roll 3mm x18m (2)
Italeri 50826 Masking tape roll 3mm x18m (2)
Professionele accessoires - ITALERI gereedschap en een uitgebreid gamma penselen maken het bouwen en ontwerpen van modelbouwpakketten van allerlei aard gemakkelijker dankzij hun hoge kwaliteit. Of het nu gaat om ronde penselen, platte penselen, extra dunne puntige penselen of precieze hulpjes zoals zijkniptangen, vijlen en pincetten, ITALERI accessoires maken modelbouw leuk.
Afmetingen (verpakking): 0,7 x 9 x 15,5 cm
Gewicht incl. verpakking: 15,4 g
Italeri Nummer: 50826
EAN: 8001283508261

51462, TA06/XV01 Kegeltandwiel diff.- huis - 52T
Kraagschroeven 3x6mm (5)
Technische gegevens:
- M3x6mm afmetingen
- M3 draad en inbus
Omvang van de levering:
- Set van 5 kraagschroeven
Tamiya nummer: 22008





53338, Tire Cementing Helper
Tire Cementing Helper
Tamiya nummer: 53338
EAN nummer: 4950344533381

53604 Tamiya, 1/10 Racing Rear Wing Set (2) 172mm clear
53604 Tamiya, 1/10 Racing Rear Wing Set (2) 172mm clear

67479 Tamiya M/N-Maske Schw. XL Comfort Fit
Tamiya Comfort Fit Mask Black XL
- Choose from two types of colors (black and gray). Each features a complementary gray Tamiya logo.
- Three-dimensional shape and stretchy material provide a comfotable fit.
- Can be washed about twenty times.
- This mask not only blocks UV rays, but also features the antimicrobial and deodrant finish which helps you keep the masks clean and fresh.
- Compliant with American and European inspection standards.
- Materials: polyester (92%) and polyurethane (8%).
Includes 1 pc.
Tamiya nummer: 67479

67480 Tamiya M/N-Maske Grau XL Comfort Fit
Tamiya Comfort Fit Mask grey XL
- Choose from two types of colors (black and gray). Each features a complementary gray Tamiya logo.
- Three-dimensional shape and stretchy material provide a comfotable fit.
- Can be washed about twenty times.
- This mask not only blocks UV rays, but also features the antimicrobial and deodrant finish which helps you keep the masks clean and fresh.
- Compliant with American and European inspection standards.
- Materials: polyester (92%) and polyurethane (8%).
Includes 1 pc.
Tamiya nummer: 67480