Traxxas XRT Ultimate - Green X, Limited Edition

Traxxas XRT Ultimate - Green X, Limited Edition

Description

• High-Performance Aluminum Upgrades
  • 6061-T6 aluminum C-hubs
  • 6061-T6 aluminum steering blocks
  • 6061-T6 aluminum rear hub carriers
  • 6061-T6 aluminum differential housings
  • 6061-T6 aluminum motor mounts
• VXL-8s^™ Waterproof Electronic Speed Control
  • New aggressive tune for more power at any RPM
  • Integrated cooling fan
  • 3-LED status indicators
  • Machined heat sink
  • Powered accessory ports
  • 10-gauge silicone wire
  • Integrated protection circuits
• Velineon^® 1200XL Brushless Motor
  • 4-pole 1275 kV
  • 5 mm output shaft
  • Oversize aluminum heatsink for improved cooling
  • Dual cooling fans
• Up to 60+ mph with Two 4s LiPo Batteries (sold separately)
• Traxxas Stability Management^®
  • Improves straight line acceleration and braking on low-traction surfaces
  • Never dulls throttle or slows the truck
  • Adjusts from off to 100% assistance from the transmitter
• TQi™ 2.4 GHz  2-Channel Radio System with Factory-Installed Wireless Module
  • Factory-installed telemetry sensors
  • 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports
  • Patented waterproof receiver box with easy-access plug
• X-Maxx^® Spec 8s Drivetrain
  • Machined, hardened steel pinion and spur gear
  • Full-time shaft-driven 4-wheel drive
  • Heavy-duty steel CV driveshafts & axles
  • Splined aluminum center driveshaft
  • Machined aluminum stub axles

• Transmission
  • Mod-1 pinion and spur gears
  • Torque-Biasing Center Drive
• Maxx^® Spec Differentials
  • Heavy-duty sealed 4-gear design
  • Large scale steel ring and pinion gears
  • Splined outdrives attached with external thru-bolt method
  • New bulkhead and covers increase bearing support
• Rock-Solid Motor Mounting System
  • Rigid aluminum motor mounts
  • Precise preset gear mesh adjustments
  • 4 keyed pins lock the motor in place
  • Motor retention separate from gear mesh
• GTX™ Aluminum Race Shocks
  • Machined aluminum threaded body
  • Extra-large bore and capacity
  • Ultra-smooth TiN-coated 5.2 mm damper shafts
  • Lower seal cartridge includes integrated wiper seal combination
  • Aluminum upper spring retainers
  • Aluminum shock caps with pivot balls
  • Lower spring perches bolted on
• WideMaxx^® Suspension
  • Extra-wide suspension arms
    • Made from our strongest cold-weather material
  • Double-shear connections
  • High-strength steel suspension pins with retainers
  • 4 mm machined pivot balls
  • TUBES 7075-T6 Aluminum front toe links
  • Oversized wheel bearings
• Steering
  • 6061-T6 aluminum steering bellcranks
  • Powerful 450 oz-in metal-gear steering servo
  • Double-shear aluminum servo horn
  • Heavy-duty servo saver spring
  • Dirt evacuation channels

• Ultra-Low-CG Chassis Design
  • Modular chassis with interlocking bulkheads
    • Low center of gravity for improved handling
    • Flat bottom design
    • Heavy-duty interlocking skid plates
    • High-strength buttressing on shock towers
  • Dual snap-lock battery compartments
    • Protects batteries from side impacts
    • Allows secondary battery-clip security
  • Interlocking components for tight tolerances
• ProGraphix^® Clipless Body
  • Snaps in place in just seconds
  • Secure body latches are easy to use
  • Clipless body mounting system
  • Rigid internal frame
  • Dual high-capacity cooling ducts
  • Molded body reinforcements for tear-through protection
  • Protective top skids
  • Rugged high-downforce rear wing
• Heavy-duty Bumpers
  • Reinforced front bumper and rear wing support
    • Absorb impact forces while retaining shape
  • Heavy-duty front bumper and support
  • Reinforced rear wing support
  • Nerf bars for side impact resistance
  • Heavy-duty wheelie bar with carry handle
• Wheels and Tires
  • 7.4″ Gravix^™ belted race tires
    • Belted carcass virtually eliminates ballooning at high speed
    • Low sidewall for sharp turn-in response
    • Runs quieter than traditional off-road tires
  • 3.8″ matte black XRT race wheels
  • High-strength glue and bead design
  • Huge 24 mm splined wheel hubs
• Sealed Ball Bearings
• Hex hardware with Rust-Resistant Black Oxide Coating

Traxxas Mini Slash Bl-2s Orange Incl Battery & Usb Charger - 108164-1-ORNG

Traxxas Mini Slash Bl-2s Orange Incl Battery & Usb Charger

Traxxas Mini Slash Bl-2s Pink Incl Battery & Usb Charger - 108164-1-PINK

Traxxas Mini Slash Bl-2s Pink Incl Battery & Usb Charger

Traxxas Mini Slash Bl-2s Yellow Incl Battery & Usb Charger - 108164-1-YLW

Traxxas Mini Slash Bl-2s Yellow Incl Battery & Usb Charger

Traxxas Mini Slash Bl-2s Green Incl Battery & Usb Charger - 108164-1-GRN

Traxxas Mini Slash Bl-2s Green Incl Battery & Usb Charger

Traxxas Trx-4 Sport Clipless Crawler Blue - 82224-4-BLUE

Traxxas Trx-4 Sport Clipless Crawler Blue

Traxxas Trx-4 Sport Clipless Crawler Gray - 82224-4-GRAY

Traxxas Trx-4 Sport Clipless Crawler Gray

TAMIYA Body Set Porsche 911 GT3 R (992)

TAMIYA Body Set Porsche 911 GT3 R (992)

Carrosserie Porsche 911 GT3 R inclusief decor-stickers en afplakstickers voor de ramen

Leveringsomvang:
1 Porsche carrosserieset incl. decoratievel

TAMIYA Porsche 956 w. Spoiler 47508

Porsche 956 w. Spoiler 47508

Porsche 956 body (ongespoten), achterspoiler en lampinzetstukken (koplampen, achterlichten) van polycarbonaat.
Geschikt voor alle Tamyia Gr.C chassis

Bijpassende stickerset 319494259 Porsche 956 Racing
Bijpassende aanbouwdelen 319007689
Bijpassende carrosseriebevestigingen 319005328

Porsche 956 body ongespoten,
Achterspoiler, lampinzetstukken (koplampen
koplampen, achterlichten), materiaal polycarbonaat.
carbonaat.

- Geschikt voor alle Tamyia Gr.C chassis

H-parts spiegel/houder Porsche 956 47508

H-parts spiegel/houder Porsche 956 47508

H-parts Porsche 956, lijst met buitenspiegels, spoilerbeugel en bevestiging.


Bijpassende carrosserie (polycarbonaat) 319803506 Porsche 956
Bijpassende stickerset 319494259 Porsche 956 Racing
Bijpassende carrosseriebevestiging 319005328

H-parts Porsche 956 sierlijst
met spiegel, spoilerbeugel en
montage.

H-Parts Porsche 956
- Kunststof aanbouwdelen
- Spiegel
- Spoiler beugel
- Montage



Dit product wordt vervaardigd door:
Tamiya Inc.
3-7 Ondabara, Suruga Ward
Shizuoka, 422-8022
Japan
www.tamiya.com

Verantwoordelijk in de EU is:
TAMIYA-CARSON Modellbau GmbH & Co. KG
Werkstraße 1
90765 Fürth
Fürth, Duitsland
www.tamiya.de

Gr.C velgen sponsrubber (2+2) Porsche 956

Gr.C velgen sponsrubber (2+2) Porsche 956

Wielset Porsche 956, bestand uit 2x schotelvelgen voor (44x30mm) en 5-spaaks velgen achter (44x45mm).
Materiaal velg kunststof, zilvergrijs.
Geschikt voor alle Tamiya Gr. C chassis.

Bijpassende sponsrubber banden:
319401900 Banden voor 65x26mm
319401901 Banden achter 65x43mm
Bijpassende plakbandset (4 smal, 4 breed, dubbelzijdig) 319808234

Wielset Porsche 956, bestaande uit
bestaande uit 2x schotelvelgen voor (44x
30mm), 5-spaaks velgen achter
(44x45mm). Kunststof velgen, zilver.

Geschikt voor alle Tamiya Gr. C chassis.
 

54155 3mm dunne Alu borgmoer (5) blauw geanodiseerd

54155 3mm dunne Alu borgmoer (5) blauw geanodiseerd

54416,RC 4x4 Voertuig Bestuurder Figuur

54416,RC 4x4 Voertuig Bestuurder Figuur

RC 4x4 voertuig bestuurder figuur

Geschikt voor de volgende Tamiya modellen:
- Toyota 4x4 PickUp Bruiser RN36 (58519)
- Toyota 4x4 PickUp Mountain Rider (84386)

Tamiya nummer: 54416

TAMIYA Buggy Fahrerfigur/Büste 54626

TAMIYA Buggy Fahrerfigur/Büste 54626

Pinion Gear 64DP 25T (7075 Hard)

Pinion Gear 64DP 25T (7075 Hard)

Precision lightweight aluminium, hard coated for long life Core RC pinion. Etched with teeth number for easy identification.

Pinion Gear 64DP 24T (7075 Hard)

Pinion Gear 64DP 24T (7075 Hard)

Precision lightweight aluminium, hard coated for long life Core RC pinion. Etched with teeth number for easy identification.

Pinion Gear 64DP 23T (7075 Hard)

Pinion Gear 64DP 23T (7075 Hard)

Precision lightweight aluminium, hard coated for long life Core RC pinion. Etched with teeth number for easy identification.

Pinion Gear 64DP 26T (7075 Hard)

Pinion Gear 64DP 26T (7075 Hard)

Precision lightweight aluminium, hard coated for long life Core RC pinion. Etched with teeth number for easy identification.

Sanwa Servo Spacer pr - E1-E6

Sanwa Servo Spacer pr - E1-E6

This pair of 1mm spacers provides an easy solution to assembling the Sanwa SRG-HR into an Eclipse 2 kit. It provides multiple useful functions;
- M3 nuts can be placed into the spacer and held in place easily during assembly, with no need for a
nut runner / spanner to secure.
- Because of this, servo can be placed centrally far easier, using only a hex driver.
- Raising the servo up to ensure all common servo savers don’t protrude underside of the chassis.

Steering Spacer 4.05 x 5.65 x 1mm (pr) - Eclipse 6

Steering Spacer 4.05 x 5.65 x 1mm (pr) - Eclipse 6

Shimizu D01J 24mm Treaded D20. (pr)

Shimizu D01J 24mm Treaded D20. (pr)

Shimizu rain tyre as used in the XG-Rain preglued set. Supplied in pairs without inserts.

Ti Pro Ball Studs - Short - (pr)

Ti Pro Ball Studs - Short - (pr)

Significantly reduce the weight of your car buy replacing the steel balls with titanium! 

Short Thread Length – 6mm

Ball Diameter 4.3mm

C/F Wide Camber Strap 1.5deg 4 Dot - Eclipse 6

C/F Wide Camber Strap 1.5deg 4 Dot - Eclipse 6

C/F Wide Track Front Beam - Eclipse 6

C/F Wide Track Front Beam - Eclipse 6

Anti Roll Bar Set - Vibe TC

Anti Roll Bar Set - Vibe TC

1/8in Chrome Steel Ball -At,Ecl,Icon/2 - pk12

1/8in Chrome Steel Ball -At,Ecl,Icon/2 - pk12

MobGums - 1:12 Foam Tires - rear - Yokomo Rims - SILVER (2 pcs)

MobGums - 1:12 Foam Tires - rear - Yokomo Rims - SILVER (2 pcs)

46mm diameter
38mm width
standard hub with 3 screws

Brushless Regler Dragster Turbo 2-3S Lipo RHI/Carson

Brushless Regler Dragster Turbo 2-3S Lipo RHI/Carson

Tamiya Cup NL 1:10 Brushless regelaar Dragster Turbo is waterdicht en geschikt voor 2/3S Lipo´s.
Deze regelaar met de toebehoorende brushless motor is speciaal gemaakt voor de Tamiya Cup NL en wordt gebruikt in de Top Stock klasse.

Natuurlijk is deze set ook te gebruiken voor andere auto´s als die in de Tamiya Cup worden ingezet.
De set is passend voor alle vaartuigen welke een 540er maat motor gebruiken.
Als je je auto wil sneller wil maken d.m.v. een 3S accu denk dan aan je overbrenging. (Tandwielverhouding).

Regelaar:
- Accutype: 2S en NiMH (6 cellen) ON-Road en OFF-Road, 3S en NiMH (9 cellen) Off en ON-Road.
- Continue stroom: 60A
- Piekstroom: 360A
- BEC-uitgang: 2A/5V
- Weerstand: 0,0007 Ohm
- Afmetingen: 51x36x36mm
- Gewicht: 80g

Leveringsomvang:
- 1 RHI/Carson 1:10 reelaar Dragster Turbo

TAMIYA 19005791 A-Parts 58351

19005791 A-Parts 58351

A-onderdelen 58351

Dit product wordt geproduceerd door:
Fabrikant /Manufacturer:
Tamiya Inc.
3-7 Ondabara, Suruga Ward
Shizuoka, 422-8022
Japan
www.tamiya.com

tamiya 10309 2mm Washer Small *20

tamiya 10309 2mm Washer Small *20

TAMIYA 10005371 C-Parts for Group C

TAMIYA 10005371 C-Parts for Group C

Tamiya C-onderdelen voor groep C Service Parts

Dit product wordt vervaardigd door:
Fabrikant /Manufacturer:
Tamiya Inc.
3-7 Ondabara, Suruga Ward
Shizuoka, 422-8022
Japan
www.tamiya.com

Hobbywing Xerun XR10 Pro Legacy Brushless Regler 150A, 2s LiPo

Hobbywing Xerun XR10 Pro Legacy Brushless Regler 150A, 2s LiPo

Hobbywing XeRun XR10 Pro Legacy Brushless ESC

The XR10 Pro Legacy brings the legendary XR10 Pro look to the latest technical standard! A modern 32-bit M4 processor ensures lightning-fast response times and high data processing performance, while the integrated smart fan activates cooling only when needed, extending its lifespan. In addition, a built-in reverse polarity protection circuit safeguards against incorrectly connected batteries – for worry-free operation on race day.

Using the optional OTA Bluetooth module and the HW Link App, all parameters can be conveniently adjusted via smartphone, firmware can be updated, and real-time data (throttle, voltage, temperature, RPM, etc.) can be monitored. The data is stored directly on the OTA module – perfect for post-run analysis after practice or racing. Also new is the enhanced Softening Function, which helps drivers manage challenging track conditions!

Features:

• 32-bit M4 processor: ultra-fast signal processing and expandable functionality.
• Smart fan control: activates only when needed for longer fan life.
• Integrated reverse polarity protection
• Real-time data logging via OTA: monitoring and recording
• Softening function: smoother throttle response on slippery surfaces.
• Wide range of applications: 1/10 on-road & off-road racing, drift, F1, rally

Technical Specifications:

Type:	Brushless, sensored ESC
Continuous / Peak Current:	150 A / 1000 A
Input Voltage:	2S LiPo
BEC:	Switch mode, 5.0–7.4 V, 5 A continuous / 10 A peak
Motor Limit:	Touring ? 4.5T, Buggy ? 5.5T, 3650(540) 2-pole motor
Fan:	Yes, intelligent start/stop function
Programming:	OTA Bluetooth module (HW Link App)
Dimensions:	37.7 x 37.0 x 33.2 mm (with fan)
Weight:	94.2 g (with wires)
Applications:	1/10 on-road & off-road racing, 1/10 drift/F1/rally

TA08 FAN DUCT 30MM

SRP FAN HOUDER 30MM VOOR TA08

TA08 BUMPER TPU 3D

TA08 BUMPER TPU 3D

SERVO HOUDER FOR 1:12 SIZE SERVO IN GROEP C

SERVO HOUDER FOR 1:12 SIZE SERVO IN GROEP C

 

Corally Balancer Lead 4S - Battery 4S XH Connector - Charger 6S XH Connector (30cm)

Corally Balancer Lead 4S - Battery 4S XH Connector - Charger 6S XH Connector (30cm)

All TC balance and extension leads are build with flexible 22AWG zero-loss silicone wire capable of passing higher currents. All bundled together in a flexible braided sleeve.

 

Specifications:

Male connector	6S XH
Female connector	4S XH
Approx length	30cm
Wire	22AWG Silicone Wire

INOV8 X-LITE Anti-Tuck Wing Mount Stiffener for Xtreme Bodies

INOV8 X-LITE Anti-Tuck Wing Mount Stiffener for Xtreme Bodies

INOV8 Productbeschrijving

 

 

Maak kennis met onze nieuwe anti-tuck vleugelbevestiging voor Xtreme body's!

Er is niets erger dan getucked worden bij het raken van een curb of door een andere deelnemer op de baan! Het verpest de run, maar het goede nieuws is dat het absoluut voorkomen kan worden!

Onze nieuwe X-Lite Anti-Tucks worden direct aan je vleugelbouten bevestigd en hebben een ingebouwd aluminium M3 schroefdraadinzetstuk voor duurzaamheid!

Een 1,5 mm dikke koolstofvezel staaf verbindt de boven- en onderkant, met twee montagemogelijkheden. In de regel wordt de onderkant aan de wielkast bevestigd met het meegeleverde 3M VHB plakband. Je kunt ook een ruimer gebruiken om de buitenste laag van de 3D-geprinte cirkel in het midden uit te hollen, zodat er een M3-gat zichtbaar wordt. Je kunt dan een gat in de carrosserie boren dat uitgelijnd is met dit gat en de carrosserie aan de versteviger bevestigen met een M3x5 schroef.

De vloerbevestiging is met opzet geprint van flexibel materiaal om schade aan de paal bij een botsing te voorkomen. Het flexibele uiteinde absorbeert de kracht en buigt in plaats van deze over te brengen op de paal.

Deze constructie is ook indrukwekkend licht met slechts 1,5 gram per paar!

Slechts 1,5 gram voor geen vervorming van het lichaam... dat hebben we er graag voor over!

Deze speciale bevestiging is geoptimaliseerd voor Xtreme body's zoals Twister en Twister Speciale.

Leveringsomvang:

1x anti-tuck vleugelbeugel links

1x anti-tuck vleugelbeugel rechts

2x 3M VHB zelfklevende ronde stippen

LRP Diaphragm (4 Pcs.), 112139 - 112139

LRP Diaphragm (4 Pcs.), 112139

RUDDOG Fuel Bottle 500ml

RUDDOG Fuel Bottle 500ml

The RUDDOG 500ml Fuel Bottle is made from high-quality plastic, featuring a lightweight design with a plastic neck for quick and easy refueling even during hectic pit stops. The soft material of the bottle allows for simple yet precise fueling, and comes with a matching cap to securely seal the bottle when not in use.

Rely on the RUDDOG Fuel Bottle to make your RC car refueling fast and efficient while enjoying style and quality.

Features:

• High-quality 500ml plastic fuel bottle
• Lightweight design for easy handling
• Plastic neck for quick and precise refueling
• Soft material for effortless fueling
• Matching cap for secure sealing
• Ideal for use in the pit lane

mmc/rol-dubbelzijdige tape 20mm/300mm

mmc/rol-dubbelzijdige tape 20mm/300mm

maat:
20mm breed
300mm lang
0.8mm dik

specer set blauw/0.5/1/1.5/2/2.5/3mm 24stuks

specer set blauw/0.5/1/1.5/2/2.5/3mm 24stuks
inhoud box:
0.5mm  4x
1.0mm  4x
1.5mm  4x
2.0mm   4x
2.5mm  4x
3.0mm  4x
maat:
binnen 3.18mm
buiten    6mm

Fluorescent orange body clip 1:10 5 ps

Fluorescent orange body clip 1:10 5 ps

Fluorescent geel body clip 1:10

Fluorescent geel body clip 1:10 5 ps

SkyRC D750 Mix Charger - 100201

SkyRC D750 Mix Charger

SkyRC Pro Parallel Charging Cable (60a) - 600023-23

SkyRC Pro Parallel Charging Cable (60a)

SkyRC Aluminum Stand For D750 Mix - 600023-24

SkyRC Aluminum Stand For D750 Mix

Hudy Titanium Adjustable Turnbuckle 55mm M3.5 L/r (2) - 992385

Hudy Titanium Adjustable Turnbuckle 55mm M3.5 L/r (2)

Hudy Titanium Hex Super Low Head Screw Slh M3x6 (10) - 908306-T

Hudy Titanium Hex Super Low Head Screw Slh M3x6 (10)

Hudy Titanium Adjustable Turnbuckle 50mm M3.5 L/r (2) - 992380

Hudy Titanium Adjustable Turnbuckle 50mm M3.5 L/r (2)

Hudy Titanium Hex Flat Head Screw Sfh M3x6 (10) - 903306-T

Hudy Titanium Hex Flat Head Screw Sfh M3x6 (10)