XRAY T4 2020 Options

XRAY T4'20 ANTI-ROLL BAR FOR BALL-BEARINGS - FRONT 1.3 MM - 302813

XRAY T4'20 ANTI-ROLL BAR FOR BALL-BEARINGS - FRONT 1.5 MM - 302815

The SLP (Super-Low Profile) rear shock tower allows to mount the shocks lower to lower the CG. With the lower shock mounting, the car is more stable as it rolls less, is easier to drive over chicanes, and has improved steering response. Recommended for medium-high technical tracks, especially for carpet.

Made from 3.0mm thick premium-grade graphite material to guarantee maximum strength and long life. Recommended for use with SLP shocks, especially in extremely-low traction track conditions.

XRAY Belt Tensioner Set - 303071

XRAY ALU SHIM 3x6x0.5MM - BLACK (10) - 303121-K

XRAY ALU SHIM 3x6x0.5MM - ORANGE (10) - 303121-O

XRAY Alu Shim 3X6X1.0Mm - Black (10) - 303122-K

XRAY Alu Shim 3X6X1.0Mm - Orange (10) - 303122-O

XRAY Alu Shim 3X6X2.0Mm - Black (10) - 303123-K

XRAY Alu Shim 3X6X2.0Mm - Orange (10) - 303123-O

XRAY ALU SHIM 3x6x3.0MM - BLACK (10) - 303125-K

XRAY ALU SHIM 3x6x6.0MM - BLACK (10) - 303128-K

Xray Steel Shim For Lower Susp. Holder 3x7.5x0.4 (10), X303131

Xray Steel Shim For Lower Susp. Holder 3x7.5x0.75 (10), X303132

Xray Steel Shim For Lower Susp. Holder 3x7.5x1.15 (10), X303133

Xray Alu Shim For Lower Susp. Holder 3x7.5x1.5 (10), X303134

Xray Alu Shim For Lower Susp. Holder 3x7.5x1.5 - Black (10), X303134-k

XRAY T2'008 Rear Suspension Arm Hard Rubber-Spec 1-Hole - 303163

XRAY T2'008 Rear Suspension Arm Extra-Hard Foam-Spec 1-Hole - 303164

XRAY Rear Suspension Arm - Hard - Rubber-Spec - 2-Hole - 303165

XRAY Rear Suspension Arm - Extra-Hard - Foam-Spec - 2-Hole - 303166

XRAY REAR SUSPENSION ARM - HARD - 1 - HOLE - 303168

XRAY ARS - ACTIVE REAR SUSPENSION ARM - GRAPHITE - 1-HOLE - 303171

XRAY ALU REAR SUSPENSION ARM - 1-HOLE - SWISS 7075 T6 - 303172

XRAY REAR SUSPENSION ARM LONG RIGHT - HARD - 303173-H

XRAY REAR SUSPENSION ARM LONG LEFT - HARD - 303174-H

XRAY GRAPHITE REAR LOWER ARM PLATE 1.6MM (2) - 303190

XRAY GRAPHITE ARS REAR LOWER ARM PLATE 1.6MM (L+R) - 303192

XRAY Rear Turnbuckle L:R 25 mm Hudy Spring Steel (2) - 303210

XRAY Alu Adj. Turnbuckle L/R 26 Mm - Orange - Swiss 7075 T6 (2) - 303212-O

XRAY T2 Composite Upright 1 deg. Outboard Toe-In Right Medium Rubber-Sp - 303351

XRAY T2 Composite Upright 0 deg. Outboard Toe-In Medium Rubber-Sp - 303352

XRAY T2 Composite Upright 1 deg. Outboard Toe-In Right Hard Foam - 303353

XRAY T2 Alu Upright 1 deg. Outboard Toe-In (L+R) - 303358

XRAY COMPOSITE UPRIGHT 0deg OUTBOARD TOE-IN - GRAPHITE - 303360

XRAY T2 Composite Upright 1 deg. Outboard Toe-In Left Medium Rubber - 303361

XRAY Composite Upright 0> Outboard Toe-In - 1-Hole - Medium - Rubber - 303362

XRAY T2 Composite Upright 1 deg. Outboard Toe-In Left Hard Foam - 303363

XRAY Composite Upright 0> Outboard Toe-In - 1-Hole - Hard - Rubber - 303364

XRAY ALU LOWER 2-PIECE SUSPENSION HOLDER - 303710-O

XRAY BRASS LOWER 2-PIECE SUSPENSION HOLDER FOR ARS - RIGHT - 303714

XRAY BRASS LOWER 2-PIECE SUSPENSION HOLDER FOR ARS - LEFT - 303715

XRAY ALU LOWER 2-PIECE SUSPENSION HOLDER - RIGHT - LOW - 303716-O

XRAY ALU LOWER 2-PIECE SUSPENSION HOLDER - LEFT - LOW - 303717-O

XRAY BRASS REAR LOWER 1-PIECE SUSPENSION HOLDER - REAR - RR - 303721

XRAY ALU REAR LOWER 1-PIECE SUSPENSION HOLDER - REAR - RR - LOW - 303722-O

New T4'20 ALU LOWER 2-PIECE SUSPENSION 0.25 ECCENTRIC HOLDER

• 0.25° Eccentric suspension mount holes
• More precise toe-in setting
• SWISS 7075 T6 Aluminum
• Black coated
• Laser engraved

Authentic XRAY alu rear lower suspension holder for the REAR of the front bulkhead, with 0.25° eccentric suspension mount holes. The eccentric holder stands allow more precise toe-in setting with 0.25° increments.

Suspension holders are CNC-machined from premium Swiss 7075 T6 aluminum, and provide the lightest & strongest possible support framework for the car.

Fits: T4’20

Alu chassis brace is used to adjust the chassis flex. It is recommended for both alu and graphite chassis to fine tune the car flex for particular track conditions. There are 4 flex adjustment possibilities – Soft, Medium, Stiff and Extra stiff.

Recommended for low, medium and high traction conditions.

Brass chassis brace is used to adjust the chassis flex. The brass brace has the same features as the alu chassis brace but at the same time it works also as an additional weight as it is 15g heavier and is positioned in absolute center of the chassis.

Recommended for higher traction conditions as the weight is positioned more in the rear of the car.

There are 4 flex adjustment possibilities – Soft, Medium, Stiff and Extra stiff.

Alu chassis brace is used to adjust the chassis flex. It is recommended for both alu and graphite chassis to fine tune the car flex for particular track conditions. There are 4 flex adjustment possibilities – Soft, Medium, Stiff and Extra stiff.

Recommended for low, medium and high traction conditions.

Brass chassis brace is used to adjust the chassis flex. The brass brace has the same features as the alu chassis brace but at the same time it works also as an additional weight as it is 15g heavier and is positioned in absolute center of the chassis.

Recommended for higher traction conditions as the weight is positioned more in the rear of the car.

There are 4 flex adjustment possibilities – Soft, Medium, Stiff and Extra stiff.