XRAY XB4

Xray Composite Suspension Arm Rear Lower Left - 3-hole - Graphite

Xray Composite Suspension Arm Rear Lower Left - 3-hole - Hard

Xray Composite Suspension Arm Rear Lower Left - 3-hole - Medium

HARD rear lower LEFT suspension arm made from super-tough, high-tech composite material gives a perfect balance between reliability and performance. The suspension arm is rigid enough for a responsive feel and extreme durability.

This HARD arm is suitable for most track conditions, especially medium- and high-traction tracks.

Intelligent arm design allows for variable positioning of the rear shocks. Depending on track conditions, the rear shocks can be installed either in front of or behind the rear shock tower, and the rear shock tower can be placed either in front of or behind the bulkhead.

For use with matching #363112-H hard lower right arm.

Xray Composite Suspension Arm Rear Lower Right - 3-hole - Graphite

Xray Composite Suspension Arm Rear Lower Right - 3-hole - Hard

Xray Composite Suspension Arm Rear Lower Right - 3-hole - Medium

HARD rear lower RIGHT suspension arm made from super-tough, high-tech composite material gives a perfect balance between reliability and performance. The suspension arm is rigid enough for a responsive feel and extreme durability.

This HARD arm is suitable for most track conditions, especially medium- and high-traction tracks.

Intelligent arm design allows for variable positioning of the rear shocks. Depending on track conditions, the rear shocks can be installed either in front of or behind the rear shock tower, and the rear shock tower can be placed either in front of or behind the bulkhead.

Xray Diff Bulkhead - Horizontal Split Design (hs) - Front/rear - Set

XRAY Diff Bulkhead Block Set Rear - 362001

Xray Front Drive Shaft 83mm With 2.5mm Pin - Hudy Spring Steel?

FRONT linear springs have been specifically designed to complement the big-bore shocks. Spring rate is constant during the entire spring compression. Marked with 1 DOT for easy identification. These springs extend the existing springs line up for further set-up adjustments.

The springs, like all the other XRAY springs, are manually measured, selected and matched into pairs to guarantee precisely equal length and damping characteristics.

FRONT linear springs have been specifically designed to complement the big-bore shocks. Spring rate is constant during the entire spring compression. Marked with 5 DOTS for easy identification. These springs extend the existing springs line up for further set-up adjustments.

The springs, like all the other XRAY springs, are manually measured, selected and matched into pairs to guarantee precisely equal length and damping characteristics.

Xray Graphite Chassis Brace Deck - Rear - 2.0mm

Xray Graphite Chassis T-brace - Front - Set

Xray Graphite Fan Holder 2.2mm

Xray Graphite Rear Body Post Holder

Xray Graphite Shock Tower For Horizontal Split Bulkhead (hs) - Front - 3.5mm

Xray Graphite Shock Tower For Horizontal Split Bulkhead (hs) - Rear - 3.5mm

Xray Hex Screw Centering Sb M3x12 (10)

Xray Lexan Rear Wing 1.5mm (2), X363511

Xray Lexan Rear Wing 2.0mm (2), X363512

Xray O-ring 16 X 2.0 (10)

Xray Open Eccentric Bushing Set (2)

Xray Outdrive Adapter For Multi-adjustable Slipper Clutch (msc) - Front - Hudy Spring Steel

Xray Outdrive Adapter For Multi-adjustable Slipper Clutch (msc) - Rear - Hudy Spring Steel

Xray Outdrive Adapter With Pressed One-way Bearing - Hudy Spring Steel

Xray Pin 2x11.6 (10),

Xray Pin 2x8.8 (10)

Xray Pin 2x9.8 (10),

High-precision eccentric 5.8mm pivot ball allows to mount the shocks in a different angle. Set of 2.

Can be used as following:

XB2 – in front and rear
XB4 – in rear
XT2 – in rear
XT4 – in front and rear

Xray Rubber Shock Absorber Shim For Alu Cap (4)

Xray Screw For One-way Slipper Clutch Adjustment - Hudy Spring Steel

Xray Servo Saver Pivot Shaft +5mm (2)

Xray Silicone O-ring 3x2.1 (10), #x972031

Xray Silicone O-ring 5x1.5 (10)

Xray Slipper Clutch One-way Outdrive Pad Sls - Soft (2)

Xray Slipper Clutch Pad Black - Medium (2)

Xray Slipper Clutch Spring C=50 - Black

Xray Steel Bevel Drive Gear - For Horizontal Split Bulkhead (hs) - Cnc-machined - 16t

Xray Steel Bushing For One-way Slipper Clutch

Xray Steel Differential Bevel Gear For Large Volume Diff 40t

Xray Steel Shock Bushing For Alu Cap

Xray Steering Brace 2.0mm Graphite, X362581

Xray Washer S 3x4.7x1 (10)

Xray Washer S 3x6x0.1 (10), X962031

Xray Xb4 Active Differential - Center - Set

Xray Xb4 Active Differential - Front/rear - Set

Xray Xb4 Alu Chassis 2.0mm For Low Profile Bumper - Swiss 7075 T6

Xray Xb4 Mounting Hardware Package - Set, X369300