Pinion Gear 48DP 36T (7075 Hard)

High Performance 2S Racing-Battery

Product Type : LiPo Pink-Performance battery pack

Voltage : 7.6V
Capacity : 7900Mah
C-rate : 130
Connector : 5mm connector
Dimensions : 139x47x26mm
Weight : 318g

De e-TCR24 is de eerste FWD body van PIPAero.
De zeer ervaren RC-coureur Silvio Piperato zit achter dit merk en heeft zich ten doel gesteld om top body's te produceren voor de competitie.
De e-TCR24 wordt geleverd inclusief voorruitmaskers en decal sheet en is verkrijgbaar in een 0,5mm en 0,7mm versie (materiaaldikte)!

De e-TCR24 is de eerste FWD body van PIPAero.
De zeer ervaren RC-coureur Silvio Piperato zit achter dit merk en heeft zich ten doel gesteld om top body's te produceren voor de competitie.
De e-TCR24 wordt geleverd met voorruitmaskers en decal sheet en is verkrijgbaar in een 0,5mm en 0,7mm versie (materiaaldikte)!

PRECISION MASKING TAPE 10MM X 18M - 2PCS

PRECISION MASKING TAPE 18MM X 18M

PRECISION MASKING TAPE 2MM X 18M - 2PCS

PRECISION MASKING TAPE 3MM X 18M - 2PCS

PRECISION MASKING TAPE 6MM X 18M - 2PCS

propo neck strap black

Raceform Perfect Wheel Arc Cutter for 1:10 Touring Car

Maak je RC-leven gemakkelijker met STIJL!
Raceform lanceert met trots haar allereerste on-road specifieke box accessoire. Deze PERFECT WHEEL ARC CUTTER is het enige gereedschap dat in staat is om keer op keer een perfecte wieluitsparing uit te snijden zonder gedoe.
Niet alleen dat, uw carrosserie ziet er beter uit dan ooit, de prestaties worden verbeterd met een betere luchtstroom en u bespaart uzelf schade aan uw prachtig gelakte carrosserie bij het uitsnijden van de wielkasten. Een perfecte wielkast zorgt voor de juiste luchtstroom en leidt tot een voorspelbaarder rijgedrag. HOE? Omdat je links en rechts een 100% symmetrische wielkast kunt hebben!

De Perfect Wheel Arc Cutter is speciaal ontworpen voor 1/10e schaal toerwagens.

Specificaties:

• Instelbaar van 60mm tot 70mm diameter
• Werkt met elk standaard hobbymesje
• Beveiligd positie ontwerp, zorgt ervoor dat het gereedschap niet beweegt wanneer 2 of meer sneden nodig zijn, waardoor de tweede snijlijn geëlimineerd wordt
• Tri Bearing positie, maakt 100% perfecte boog mogelijk
• Geschikt voor Lexan tot 1mm
• Super veilig, het mesje is niet zichtbaar tijdens het snijden

Racing Performer 180mm Brushless Sensor Cable ver.2

3.5mm diameter banana connector used for motor connection. Set of 3 female side.

Racing Performer 70mm Brushless Sensor Cable ver.2

Racing Performer 90mm Brushless Sensor Cable ver.2

Radtec 30mm & 40mm Aluminum Motor Cooling Fan Mount V2, Black

Radtec Flex Sensor Wire Flat Bonded 90mm

The Raytronic C30 + 300W was designed to offer an intelligent pocket charger with high performance and very simple operation. RAYTRONIC C30 + allows charging and discharging common types of cells (NiCd, NiMH, LiPo, LiHV Li-ion, LiFe, Pb), in addition it is equipped with a built-in six-channel balancer, which ensures safe and comfortable charging of lithium batteries. Measurement of voltage and internal resistance of individual cells (for lithium batteries) is a matter of course.

Features:

• Input supply voltage 10 - 26 V DC (socket XT60)
• For charging and discharging 1 - 16 NiCd / NiMH cells, 1 - 6 Li-ion / LiPo / LiHV / LiFe cells or 2- 20 V lead-acid batteries
• Adjustable charging current (0.1 A - 12.0 A)
• Adjustable discharge current (0.1 A - 3.0 A)
• Max. power for charging 300 W, for discharging 5 W
• Termination of charging using delta-peak automation for NiCd and NiMH batteries
• Lithium and Pb batteries are charged using the "constant current / constant voltage" method
• Adjustable delta-peak detection sensitivity for NiCd and NiMH batteries
• Adjustable end voltage for charging and discharging for lithium batteries
• Repeated cyclic operation of charging / discharging or discharging / charging for NiCd and NiMH batteries, up to 5 cycles
• Four charging modes for lithium batteries - normal charging, fast charging, balancing charging and storage charging / discharging
• Stop charging when the set time or the supplied charge is exceeded.
• Memory for 5 charging / discharging programs.
• Measurement of the total voltage of the set and individual cells (for lithium batteries)
• Measurement of the total internal resistance of the set and individual cells (for lithium batteries)
• The XT60 power output socket and the JST-XH 2-6S universal balancer socket allow you to connect the rechargeable battery directly without the need for a charging cable and balancer adapter (if the kit is equipped with an XT60 power connector and a JST-XH service connector)
• Two-line backlit LCD display with simple and clear menu and display of parameters during charging / discharging
• A number of warning text messages contribute to safe operation - incorrect input voltage, incorrect connection, unsuitable battery or its condition, incorrect polarity at the output
• Reverse polarity and short circuit protection at the output / li>
• Compact plastic case, small dimensions
• Built-in fan for forced cooling

Specifications:

Powerful stabilised switched-mode power supply Raytronic P20 with adjustable output voltage and current limit is perfect for powering modeller's chargers with power up to 300W and other electronic devices. It is suitable for testing electronic devices that have to be powered by 6–15V DC.

The power supply is equipped with protection circuits that protect it from short-circuit on input or from overloading. There is an active cooling system, which stabilises operating conditions and protects from overheating.

Output voltage and current limit are adjusted via knobs on the front panel - values of output voltage or current are shown on 3-digit LED display (choose between current and voltage via switch).

Thanks to an adjustable output voltage and current limit you can use the power source as a charger for batteries that need constant voltage/constant current charging mode (such as acid-lead or Li-Fe batteries, other than A123® with different chemicals and charging behaviour. Common modeller's chargers specialized for A123® cells can end the charging too soon (or completely ignore the cells) etc.
 

Specifications:

Includes:

• Raytronic P20 power supply
• Power cable
• User manual

RC Car Colours Lexan Fluo Orange nr1006 150ml