These spacers are designed to gain even greater precision in your touring car model tread setup (the width between the wheels), with these 0.5mm/1.0mm spacers.

Contains Aluminum Wheel Spacers 0.5mm (4) 1.0mm (4) 
Altering the tread of the car allows you to modify the stability of the model.
Aluminum parts offer excellent durability and rigidity.
Compatible with touring car R/C models.

Aluminium stopmoeren blauw 5st. m4

TA07 Pro BE9

Aluminum Adjustable Servo Horn
Met deze Tamiya verstelbare aluminium claxon kunt u de stuurgeometrie van uw racewagens chasseren. U kunt het stuurbereik afstellen door de hoogte van de arm op de servo saver te verhogen of te verlagen.

- Servo Horn A, B & C componenten x1 elk
- Hi-Torque Servo Saver Spring (Large) x1
- Hi-Torque Servo Saver Springs (kort) x2
- Hi-Torque Servo Saver gegoten onderdelen x1
- Hiermee past u de afstand aan tussen het midden van de servohoorn en de kogelverbinding in stappen van 1 mm tussen 15 mm en 22 mm.
- Werkt ook als servo saver en helpt de servo te beschermen in geval van botsingen en stoten.
- Kleine onderdelen voor bevestiging inbegrepen.
- Compatibel met chassis-auto's TA07, TB-05, TT-02, TT-02B, M-07 Concept, M-06, M-05, CC-01, GF-01 en G6-01 *.

tamiya as trf 44mm

BA2 screw 2,6x10mm (5)

TA07 Pro BE6

BA6 / BB2 Ophangsschroeven 

53042 Tamiya Bal Differentieel Vet 10g

Ball connector nut 5mm (4)

TAMIYA band op velg gelijmd 2st.

Blockreifen V-Profil (NDF-01)
Innendurchmesser ca.67 mm
Aussendurchmesser ca.108mm
Breite ca. 51 mm

Tamiya 53854

Passent OP

Tamiya body ruimer om mooi ronden gaten in je body te maken.
een must voor elke hobbyist.

Tamiya Body Set Fiat Abarth 1000 TCR Berl. Cor. 51709

met certificaat voor de Tamiya Cup NL

Artikelnummer: 51709
EAN: 4950344517091

- De gespierde vorm van de Abarth-getunede auto is kunstig nagemaakt door de lichtgewicht en duurzame polycarbonaat body.
- Gebruik 55mm diameter voorbanden (Item 50568 M-Chassis Radial Tires of Item 53215 M-Chassis Slicks) en 60mm diameter 60D achterbanden.
- Inclusief markeringsstickers en afplakstickers voor gebruik in de lak.
- Metalen onderdelen zijn ook inbegrepen voor bevestiging.
- Compatibel met de S (210mm) wielbasis MB-01 chassis auto's.
- Wordt geleverd in een slimme, speciale kartonnen doos.
- Let op: chassis en cockpit onderdelen zijn niet inbegrepen.

Body Set Opel Kadett GT/E RS 239mm

This is a lightweight version of the standard body parts set of the popular electric powered Raikiri GT model (Item 58626). Made from 0.8mm polycarbonate as opposed to the standard 1.0mm, it will give your R/C racing car model a lower center of gravity, thereby improving its performance.

• 0.8mm thickness polycarbonate.
• 0.8mm thickness Racing Wing α parts (Item 54457) are included, with stay mounts allowing different setups.
• Marking stickers, plus masking stickers for use when painting are included.
• Compatible with 257mm wheelbase R/C touring car chassis.

Body set Volkswagen Golf II GTI 16V Rally met certificaat

These gears for the TB-04 chassis are made of carbon fiber-reinforced resin material, making them more resistant to wear and therefore suited to use with higher-powered motors.

• 40T Carbon Fiber-Reinforced Ring Gear x1
• 16T Carbon Fiber-Reinforced Bevel Gear x1
• 20T Carbon Fiber-Reinforced Miter Gear x1
• Compatible with TB-04 chassis cars.
• For best performance, it"s best that gears be installed as a set, and not individually.

Bearings are an essential part of your model. Your first upgrade on a Tamiya model should be to replace the supplied plastic bushings for bearings. This will improve performance, battery runtime and reduce noise levels from your model.

If you are already running bearings, check to see they are all still running freely. Over time dirt and grit starts to bind them and you will loose performance from your model.

The bearings come pre-lubricated, so all you have to do is fit them to your model.

This set contains

18 bearings for the Tamiya CC01 Chassis.

The different size bearings for this Set will come supplied in individual labeled sealable bags to make identification and storage easier.

tamiya central shaft hotshot 

TAMIYA Cera Grease HG

TAMIYA Clamp Type Alu Wheem Hub (9mm Thick/2Pcs)