Tamiya

Tamiya 0004252 B-Parts DT02/ DT03 Wielblokken voor en achter en wielmeenemer

Passend voor volgende chassis:

49475 DT-02MS Chassis Kit
57748 XB Desert Gator
57755 XB Sand Viper
57774 XB Neo Falcon
58340 Super Fighter G
58344 Desert Gator
58374 Sand Viper
58401 Neo Falcon
58470 Holiday Buggy 2010
58485 Super Fighter GR
58500 Sand Rover 2011
58511 Nissan Titan Racing Truck
58522 Street Rover

TAMIYA DT-03T/TL-01/FF-02 Body Mount Set - 50855

CC-01 Assen 2x10mm (10) (BB3)

TAMIYA 3MM WASHER (15) - 50586

TAMIYA 3X15MM TAPPING SCREW (10) - 50583

TAMIYA 3X14MM STEP TAPPING SCREW (5) - 50582

Zelftapschroef 3x12mm BB3 10st.

Parkerschroeven 3x10mm (10)

46stuk schroeven voor de 58340

Imbusschroeven M3 10st.(BD3)

TA07 Pro BC7

BA2 screw 2,6x10mm (5)

TA07 Pro BE6

1/10 Neo Fighter Buggy DT-03

The Neo Fighter Buggy is mounted on the newly developed and easy to build DT-03 chassis platform. Intended as an easy- to-get-started model to encourage young drivers to enter the world of R/C, its intuitive yet tough design allows hassle-free assembly and gives less experienced users the opportunity to get to grips with R/C model composition and construction.

Specification:

Scale : 1/10
Construction type : assembly kit
Terrain use : off-road
Drive-train : 2WD
Drive type : gearbox
Drive line : dog bone
Differential type : gear
Suspension : fully independent double wishbone
Steering mechanism : direct servo
Shock damper : friction damper
Shock damper material : plastic
Tire type : rubber
Tire tread : pin spike
Body material : Polycarbonate
Chassis material : plastic
Electronic Speed Control (ESC) : included
ESC model : TBLE-02S
LED Light buckets : no
LED lights : no
Motor : 540-brushed type
Bearings : plastic bushing
Adjustable camber : fixed
Adjustable toe angles : front only
Adjustable ground clearance : yes
Adjustable gear ratio : yes
Adjustable wheelbase : fixed
Adjustable track width : fixed
Adjustable shock angle : fixed
Special feature 1 : Monocoque DT-03 chassis
Special feature 2 : Utilizes a longitudinally-placed rear motor, rear-wheel drive set-up.
Special feature 3 : Long wheelbase design enables stable performance.
Special feature 4 : The angle of the skid-shaped underside has been increased to raise the car?s off-road potential.
Special feature 5 : Features a newly-designed body molded in tough polycarbonate material.
Special feature 6 : Includes a torque-tuned motor and CVA shock units.
Special feature 7 : Includes Tamiya TBLE-02S ESC (capable of running brushed and brushless motors)
Requires A : 2-channel radio gear
Requires B : 7.2 battery & charger
Requires C : polycarbonate paint

TAMIYA Damper O-Ring 3x6mm red (10) - 50597

TAMIYA TRF Damper Urethane Bushing (10) - 53577

TAMIYA TT-02 Gear Box Joint Universal Shaft (2) - 54477

TAMIYA 2x8mm Tapping Screw (10) Differential - 50573

Tamiya’s Racing Factory designers have a very specific and focused goal. Provide Tamiya’s hardened and lifelong fan base state-of-the-art radio control racing products. The TRF420 is Tamiya’s successor to the popular TRF419 series which included the TRF419, TRF419X, and the TRF419XR. Our design team have come up with a host of brand-new parts designs that ensure this racing chassis takes the TRF Series of products to a different level.

• 1/10 scale 4WD R/C touring car chassis model assembly kit.
• 2 belt-driven 4WD drivetrain utilizes rear gear differential and front/center direct pulley.
• New gear diff pulley and case parts provide a weight savings of 1.5g,
• Less oil leakage from newly designed diff parts.
• Front direct pulley and direct holder are made from an integrated plastic part for a weight savings of 2g compared to previous designs using separate parts. Direct cups are screw-attached, allowing their replacement without the need to remove the direct pulley component.
• New double cardan universal shaft design.
• Employs a carbon fiber double-deck frame (2mm thickness upper and lower decks) for just the right balance of flex characteristics.
• New suspension arm design, which use bushing inserts to allow different lever ratios.
• Rear arms are 3mm offset to the rear, allowing a shorter lower deck and increased traction.
• New adjustable suspension mounts and plastic bushing design. Changing the bushings allows a huge range of toe, roll center and caster angle settings.
• An updated steering linkage is now paired with a new steering pivot component, for easy tweaks to the steering setup.
• New Bearing holders (on gear diff and front direct pulley) provide more precise location and a super-smooth drivetrain.
• The bumper design has been altered so as not to impact chassis' roll characteristics.
• New body mounts are 2mm offset; change their attachment position for different body mount location and fine tuning of your car's center of balance.
• New Lightweight wheel axles weigh approximately 1.5g less than predecessors and allow a choice between clip or grub screw fastening.
• New suspension shafts are made of durable stainless steel. At 3mm in diameter, they are thicker than previous 2.6mm parts for a sturdier suspension setup. They have a continuous groove for easier grub screw attachment.
• New 2-part front upright designs utilize separate arm and bearing housing components.
• New rear uprights are redesigned for use with 3mm diameter shafts.
• New front hub carriers have been revised specifically for this chassis, with greater resistance to shocks and crashes. They are also compatible with 3mm diameter shafts. Upper and lower flanged tubes are now identical.
• Required to complete: 190mm GT body set, 24mm wheels and tires, 2-channel radio, servo, ESC, 7.4 racing battery and compatible charger, and 540-size racing motor.

TAMIYA M-Chassis Tires 60D reinforced Type A (2)

1/10 M-Chassis Wheel-Set 11-Spoke Racing white (4)

Tamiya nummer: 51394

M-Chassis inserts type 60D hard 4stuk

Tamiya nummer: 53255

M-Chassis inserts Super Hard (4)

Tamiya nummer: 54590