Brass Circular Weight 5g (pk4)SCHUMACHER

Each weight has dimensions of:
Diameter - 13.55mm
Depth - 4.29mm
Contains M3x6 Csk Head screws x 4.

CONTACT 1/12 FRONT 32SH CONTROL TYRE 44MM

Contact RC 'orange stripe' LMP12 Control Tyres.

 

A great price, level playing field solution for LMP12 racing.

A Foam is our most durable, affordable tire. Perfect if you want to go many runs without taking the wheels off the car during weekly club racing. The wear rate of this foam is the lowest in the range. In lower traction conditions; occasionally it is a match for the more expensive options. Suggested for use on Primafelt or CRC Black carpet, or when oily additive is in use.

CONTACT 1/12 FRONT PINK 30SH A FOAM - 44MM

"A" Foam is our most durable, affordable tyre.  Perfect if you want to go many runs without taking the wheels off the car during weekly club racing.  The wear rate of this foam is the lowest in the range, even lower than seen with "T" foam.  It rarely offers the overall performance of the others, however in lower traction conditions; occasionally it is a match for the more expensive options.  Suggested for use on Primafelt or CRC Black carpet, or when oily additive is in use.

CONTACT 1/12 HEX REAR 30SH CONTROL TYRE 46MM

Contact LMP12 tyres with 12mm hex fitting for the Eclipse 4 and other brands using the U8176 - LMP12 Hex Lightweight Spool Set.

Contact RC Foam Tyres - 1/12 Front DOUBLE PINK 35Sh A foam-44mm

“A” Foam is our most durable, affordable tyre. Perfect if you want to go many runs without taking the wheels off the car during weekly club racing. The wear rate of this foam is the lowest in the range, even lower than seen with “T” foam. It rarely offers the overall performance of the others, however in lower traction conditions; occasionally it is a match for the more expensive options. Suggested for use on Primafelt or CRC Black carpet, or when oily additive is in use.

Contact RC Foam Tyres - 1/12 Hex Rear 30Sh Control Tyre 46mm

Contact RC Foam Tyres - 1/12 Hex Rear 30Sh Control Tyre 46mm

Contact RC Foam Tyres - 1/12 Hex Rear Soft Pink 28Sh A Foam 46mm

Contact RC Foam Tyres - 1/12 Hex Rear Soft Pink 28Sh A Foam 46mm

Core RC - SETUPBOORD TAS

Neoprene, zip up bags to protect your set up board during transportation. With cool branded look! Also make great laptop bags.

40x30cm

CORE RC ALLOY MOTOR SPACER - 1MM - PK2

CORE RC alloy 1mm motor spacer, allows the motor to be moved to improve balance. Pack of two that can be used together to get 2mm of movement

CORE RC SILICONE BALL DIFF VET - 10ML

Uitgebreid getest door onze engineeringafdeling en het fabrieksraceteam om u gedekt te hebben voor alle toepassingen.

Geleverd in grotere dan normale 10ml potten die ook veel waarde bieden.

Onderscheidende CORE RC-branding houdt uw pitgebied op punt.

Veel gebruikt siliconen bal diff vet, voor gebruik op de hoofdballen van een diff. Stabiel en consistent voor vele runs. 100% Pure siliconen.

CRAGG KWF INSERT 2WD FRONT - PR SCHUMACHER

CRAGG KWF INSERT 2WD FRONT - PR

DE BINNEN BAND VOOR HET EK 2023
The World Championship Winning brand....Cragg Racing. A name well known in Off Road circles these products have been developed by Mick Cragg and used by Neil with great success.

The inserts are slightly softer than Schumacher mediums but slightly larger. Therefore they fill the tyre more, giving different support, enabling you to tune to different track conditions.

CRAGG KWF INSERTS 1/10TH 4WD FRONT PR SCHUMACHER

CRAGG KWF INSERTS 1/10TH 4WD FRONT PR

DE BINNEN BAND VOOR HET EK 2023
The World Championship Winning brand....Cragg Racing. A name well known in Off Road circles these products have been developed by Mick Cragg and used by Neil with great success.

The inserts are slightly softer than Schumacher mediums but slightly larger. Therefore they fill the tyre more, giving different support, enabling you to tune to different track conditions.

CRAGG KWF INSERTS 1/10TH REAR PR SCHUMACHER

CRAGG KWF INSERTS 1/10TH REAR PR

DE BINNEN BAND VOOR HET EK 2023
The World Championship Winning brand....Cragg Racing.
 

A name well known in Off Road circles these products have been developed by Mick Cragg and used by Neil with great success.

The inserts are slightly softer than Schumacher mediums but slightly larger. Therefore they fill the tyre more, giving different support, enabling you to tune to different track conditions.

CS Control-X Grip Carpet Additive 100ml

CS Control-X Grip Carpet Additive 100ml

ECLIPSE 5 - 1/12TH CIRCUIT - KIT

The Schumacher Eclipse cars are the current reigning 1/12th scale IFMAR World and EFRA European Champions in both modified and stock classes. 

The New Eclipse 5 features an extensive list of refinements, making it even faster and better handling.

The Eclipse 5 is the ultimate professional LMP12 racing chassis kit. The choice of champions!
 

• NEW - Alloy chassis design with a much shorter overall length.  This allows for reduced chassis scrubbing along with a significant weight reduction from beyond both front and rear axles.  These benefits allow the car to enter a corner more effortlessly and when in the corner, rotation is achieved more freely.  
• NEW - Upgraded left and right rear hex wheel clamps to prevent any wheel wobble issues.  Now perfectly true running wheels with our unique single nut rear wheels/solid axle!
• NEW - Servo mounting has been improved, resulting in direct mounting for the Sanwa micro range of servos such as the PGS-HR and SRG-HR.  Direct and easy alignment onto the centre of the car.  In doing this the chassis flexibility characteristics have been vastly improved, for performance and strength, by removing the large, off centre transverse slots previously used.  All other brands of servo still can be used with the ultra-lightweight floating servo mount, included.
• NEW - Lightweight and flexible 3D printed rubber bumper, offering perfect body shell protection.  Compared to the previous foam bumper, it is also very durable and long lasting.
• NEW - Black aluminium steering turnbuckles now included.  Stealth and lighter weight. 
• NEW - Updated top decks design, further reducing the polar moment of inertia.  They now secure at the front within the wheelbase.
• NEW - The front lower beam has been improved, mounting in line with the front axle, and further reducing this forward weight, allowing for the reduced chassis length.  The new beam makes use of super easy, slide in, speed secret ride height spacers. 0.5mm U7920 and 0.75mm U7921.
• NEW - Independent and lightweight front bumper mount makes front end assembly far easier.  The front bumper can now be removed with only 2 screws.
• NEW - Moulded lighter weight front hub carrier design with much improved suspension action and damping characteristics.  Un-sprung mass has also been reduced.
• NEW - Tweak free and easy LiPo mounting using new lighter weight O-ring fixing.
• NEW - Interchangeable front LiPo position stops with 4 equally spaced settings included. 
• NEW - Optional 1.0° camber strap available.  1.5° camber is included in the kit for maximum steering and lap time in most conditions.
• NEW - Pod offset has been refined to achieve the perfect pod balance with a wider range of modern motors.
• NEW - Lightweight pod carbon parts for lower centre of gravity and overall car weight.
• NEW - Underside Variable Chassis chamfers, offering improved ground clearance, smoother scrubbing and better clearance to curbs or other corner markers.

Not forgetting all the usual features that have made the Eclipse IFMAR World and EFRA European Champion.

- Range of optional colour coded front springs.
- Big Bore side and centre dampers offering long lasting damping. They also give great damping oil retention (less frequent maintenance required) and a compact and central design. Damper geometry changes have improved damping characteristics.
- Lightweight pod assembly for smoother, more predictable drivability and bump handling.  Strengthened for tweak prevention. 
- Lightweight Low Centre of Gravity CNC Alloy Motor Mounts.
- Rear ride height adjusters, easier adjustment and 0.25mm height increments.
- Front beam socket using O-ring fixing system.
- Thread insert design making work on the car much quicker and simpler.
- Easy body shell height adjustment.
- Extra low rear roll centre pivot height for awesome rear traction.
- Centre pivot design for easy build and maintenance, with a fully bind free design.
- All black nuts as standard.
- Perfectly balanced rear pod assembly.
- Ultra-low motor position.
- Full range of colour coded rear and side springs.
- Separate springs for independent roll and bump stiffness adjustment.
- Ball bearing front and rear axles.
- Adjustable toe-in/out.
- Chassis balance pivot holes. For use with U3582 Precision Balance Pivot Set. (Available Separately) To optimise left/right weight distribution.
- Rear tweak adjustment via side springs.
- Simple rear droop adjustment.
- Small Kimbrough servo saver with stiffener included as standard.
- High tensile steel hex screws used throughout.
- High quality easy to follow instruction manual.
- Range of World Championship Winning Contact RC foam tyres available.
- Accepts a huge range of industry standard body shells, motors, LiPo’s and speed controllers.
- Suitable for USA rules GT12 racing. 

Equipment Needed 2 Channel Radio Motor Servo Electric Speed Control 1S Lipo Battery Bodyshell & Paint Wheels and Tyres

Eclipse 5 Specification   Power Source: ELECTRIC Model Type: 2WD, ON-ROAD, COMPETITION Length: 280mm Width: 172mm Top Speed: 40 MPH+  Wheelbase:  202mm

Flysky FGr4D AFHDS3 Receiver 4CH

Product information "Flysky FGr4D AFHDS3 Receiver 4CH"

The bidirectional FGr4D receiver is equipped with 4 channels and runs the AFHDS3 protocol. Thanks to the two built-in antennas and the compact design, there are numerous possible applications in the smallest of spaces. In addition to the four channels, the receiver also offers 5 functional interfaces that can be configured with different signal types such as i-BUS2, S.BUS, i-BUS and PPM. The FGr4D is also waterproof according to the PPX6 standard.

Technical Specifications

PWM-Channels:	4
RF:	2.4GHz
Protocol:	AFHDS 3
Antennas:	Dual (internal)
Input Voltage:	3.5-9V
Output:	PWM/PPM/i-BUS/S.BUS/i-BUS 2
Temperature:	-10°C to +60°C
Max. Humidity:	20%-95%
Update:	Yes, online
Dimensions:	30.3x25.8x20mm
Weight:	7.2g
Suitable for:	Cars, Boats
Compatible Transmitter:	all AFHDS3-Transmitter

Flysky FGr4S AFHDS3 Receiver 4CH

Product information "Flysky FGr4S AFHDS3 Receiver 4CH"

The FGr4S receiver is the ideal support when using a Flysky remote control. The receiver makes use of a technology used by several Flysky transmitters - the automatic frequency hopping digital system (short: AFHDS3). With a bidirectional transmission system via the antenna, this receiver is specially designed for the installation and output of PWM/PPM/i-BUS and S.BUS signals. All AFHDS3-capable transmitters are supported.

Technical Specifications

PWM-Channels:	4
RF:	2.4GHz
Protocol:	AFHDS 3
Antennas:	Single
Input Voltage:	3.5-8.4V
Range:	>200m
Output:	PWM/PPM/i-BUS/S.BUS
RSSI:	Supported
Temperature:	-10°C to +60°C
Max. Humidity:	20%-95%
Update:	Yes, online
Dimensions:	25.5x22x17.3mm
Weight:	5.1g
Suitable for:	Cars, Boats, etc.
Compatible Transmitter:	all AFHDS3-Transmitter

Related links to "Flysky FGr4S AFHDS3 Receiver 4CH"

Flysky Noble NB4 with 2 Receiver

Product information "Flysky Noble NB4 with 2 Receiver"

With the NB4 radio remote control from FlySky, driving an RC car or boat offers as much comfort as it offers technical specifications. After all, the remote control uses the new and extremely flexible AFHDS3 protocol for transmission while being ergonomically design.

In combination with this protocol, the advantages of a wireless WS2A system and the new 2.4GHz chip, a wide variety of transmitter parameters can be set dynamically. This includes channel number, channel resolution, range, anti-interference requirements and also latency. This makes it possible to freely adjust the transmitter to Your own needs via the 3.5 inch TFT display. The real-time data exchange between the transmitter and the receiver also enables increased control over the flight model with constantly updated information on temperature and speed, for example.

Features:

• Advanced and modern radio
• Ergonomic design with turnable wheel
• Suitable for both right and left handers
• Dual Battery System
• Intelligent RF configuration
• Less than 3ms latency
• Also suited for simulators and games without using an external dongle via USB

 

Technical Specificatons:

Transmitter
Type:	2.4GHz ISM
Frequency Protocol:	AFHDS 3
Channels:	4, 6, 8 (optional)
Suited RC Models:	Car, Boat
Distance:	>300m (Ground)
Channel Resolution:	4096
Battery:	- 1S / (4,2V) x 4300mAh LiPo - 2600mAh 18650 Dual Battery
Low Voltage Warning:	< 3,65V
Antenna Type:	Built-in single Antenna
Display:	HVGA 3,5-Zoll-TFT, Resolution 320x480px
Simulator:	USB Simulator
Charging Interface:	Micro-USB
Data Interface:	Micro-USB
Temperature Range:	-10°C bis +60°C
Humidity Range:	20% bis 95%
Online Update:	Ja
Size:	129x114x190mm
Weight:	520g
Receiver
	FGr4	FGr4S
PWM:	4	4
Type:	2.4GHz ISM
Frequency Protocol:	AFHDS 3
Suited Transmitter:	Alle Sender mit AFHDS3-Unterstützung
Antenna Type:	Einzelantenne
Voltage:	3,5-12V	3,5-8,4V
Data Interface:	PWM/PPM/i-BUS/S.BUS
Temperature Range:	-10°C bis +60°C
Humidity Range:	20% bis 95%
Online Update:	Ja
Size:	29x22x16,2mm	25.5x22x17,3mm
Weight:	8g	5,1g

Delivery:

• FlySky "NB4" Transmitter
• Reveiver: FGr4 and FGr4S
• USB data cable
• Grip shell
• Springs (S, L)
• 2x transparent protection sticker
• Manuals

Flysky Noble NB4-Pro with 2 Receiver

Product information "Flysky Noble NB4-Pro with 2 Receiver"

The Noble Pro breaks traditional standards with new ideas and offers extensive setting options for racers, crawlers and other RC vehicles. This 18CH transmitter with 7 channel modes is ideal for any terrain and shows top performance even in the most difficult situations. In addition, the new 2CH "Extreme Mode" with a new frequency algorithm ensures unimagined performance with only little delay.

The most striking feature of the FlySky Noble Pro is the holder for smartphones and the steering wheel, the position of which can be changed so that both left and right-handers can get the best out of their vehicle all the same. Together with the comfortable shape of the handle, this is definitely an extremely ergonomic transmitter overall.

Features:

• Set consisting of over 20 parts such as transmitter, 2x receiver, case and much more
• Ideal for any off-road use, whether on-road, off-road or on the water
• 5 mixing setting options and speed segmentation for optimal adaptation to every riding requirement
• And three built-in high-performance chips for great performance
• Variety of structural personalization options (e.g. different throttle levers, springs, steering wheels, ... )
• Suitable for both right and left handers
• With 4 PWM and 8 PWM receivers as required
• Including 2 exchangeable batteries for 8 hours of action each
• Wireless charging station for convenient energy refueling
• Easy to use touch menu

Technical Specifications Transmitter:

Type:	2.4GHz ISM
Frequency Protocol:	AFHDS 3
Channels:	2 (fast), 4, 6, 8, 10, 12, 18 optional
Suited RC models:	Auto, Boot, also: Roboter, Ironclad
Distance:	< 300m
Channel Resolution:	4096
Battery:	1S / (4,2V) LiPo & 18650 Dual-Battery
Low Voltage Warning:	< 3.65V
Antenna Type:	Built-in single antenna
Display:	HVGA 3,5-inch TFT color screen, resolution 320x480px, LCD white backlight, capacitive touch screen
Simulator:	USB Simulator
Charging Interface:	Micro-USB und kabelloses Laden
Data Interface:	Micro-USB
Temperature Range:	-10°C to +60°C
Humidity Range:	20% to 95%
Online Update:	Yes
Size:	120x144x274mm
Weight:	670g (include stand)

Technical Specifications Receivers:

	FGr4B	FGr8B
PWM:	4	8
Type:	2.4GHz ISM
Frequency Protocol:	AFHDS 3
Suited Transmitter:	Suitable for all transmitter supporting the AFHDS3
Antenna Type:	Single antenna
Voltage:	5.3-9V
Data Interface:	PWM/PPM/i-Bus/s.bus/i-Bus2
Temperature Range:	-10°C to +60°C
Humidity Range:	20% to 95%
Online Update:	Yes
Size:	17x29x16.6mm	35x23.3x13.3mm
Weight:	6.4g	9.4g

Delivery:

• FlySky "Noble Pro" transmitter
• Receivers: FGr4B and FGr8B
• Hard case including key
• USB data cable
• Wireless charging station
• Grip shell (XL)
• Wrist strap
• Steering wheel and sponge (L)
• 1.5mm and 2.5mm wrench
• Brake pad set
• Thread adjusting screw
• Knob
• Springs (S, L)
• Throttle (S, L, Plastic)
• Back & angle bracket
• Sticker (company logo, various)

Related links to "Flysky Noble NB4-Pro with 2 Receiver"

•  Do you have any questions concerning this product?

Gens ace Imars Dual Channel AC200W/DC300W Smart Balance RC Charger - Europe Black

Imars Dual Battery Charger supports 2 channel charging and discharging: DC port power supply supports maximum single port 300W charging, and AC power supply supports intelligent distribution of total power.

The power rate is 200W (2 channels), the maximum charging current is 15A, the charging current is adjustable, and the use and operation are simple; 7 operating modes of the products include charge, discharge, balance, storage, ExtDischarge, SyncCharging, digital power supply;

During the charging process of the product, the current task total voltage, charging/discharging current, working time and other information can be displayed in real time through the display window;

It can also query real-time single-cell voltage information, internal resistance, and temperature, which is convenient for users to understand battery performance and charging status;

The heat dissipation design can effectively ensure the continuous stable and reliable operation of the product.
 

Features:

• Dual Channel AC/DC Smart Balance Charger - Europe Version.
• Small & Lightweight Portable Design with wide-view IPS Display.
• High power charging, capable of Max15 amp charge rates for one channel, worldwide 100V-240V voltage versatility, AC 200 Watts, DC 600 Watts.
• External discharge function.
• Synchronous output, 2-in-1 Fast-charging.
• Built-in DC power source for different devices.
• Controlled heat dissipation system.
• Temperature compensation function.
• Advanced safety features, UL94-V0 Flame Retardant Grade.
• Protection of Short circuit / Overcurrent / Overcharge / Overvoltage

Specifications:

Input Voltage	AC100-240V DC7-30V
Output Voltage	DC 1~30V
Max Input Current	DC 30A
Max Discharging Power	15W x2(Main port 6W x2, Balance port 9W x2)
Maximum Charging Power	AC 100W x2 DC 300W x2
Charge Current	0.1-15A x2
Discharge Current	0.1~3A x2
Cell Balancing	1~6s
USB Output	5V/2.4A
Display Type	2.4 inch IPS LCD Display
Supported Battery Chemistries	LiPo/LiPo/LIHV/LiFe 1~6S; NiMH/Cd 1~16S
Accessories Included	AC Input Cable / XT60-T adapter / XT60-EC5 adapter / XT60-EC3 adapter
Dimensions	145x76x62mm
Weight	530g