ZooRacing DRAKSTER 1/12 body, 0.5mm

The Mon-Tech ZERO is the follower of the Imola body shell from the Italian manufacturer. During the development, the performace and driveability was in the focus and the ZERO is available in two different versions concerning weight:
Mon-Tech ZERO 190mm, Touring Car Body Shell (MB-021-0111) Normal Version
Mon-Tech ZERO 190mm La Leggera, Touring Car Body Shell (MB-021-0111L) Light Version

English:
The Mon-Tech ZERO is the follower of the Imola body shell from the Italian manufacturer. During the development, the performace and driveability was in the focus and the ZERO is available in two different versions concerning weight:
Mon-Tech ZERO 190mm, Touring Car Body Shell (MB-021-0111) Normal Version
Mon-Tech ZERO 190mm La Leggera, Touring Car Body Shell (MB-021-0111L) Light Version

Bittydesign 1/10 FWD HIBERYA 190mm

53604 Tamiya, 1/10 Racing Rear Wing Set (2) 172mm clear

Bittydesign Clips Kit for 1/10 Off/On-road Bodies (Gold, 8pcs)

Bittydesign Clips Kit for 1/10 Off/On-road Bodies (Green, 8pcs)(4x Left + 4x Right)

Bittydesign Clips Kit for 1/10 Off/On-road Bodies (Pink, 8pcs)(4x Left + 4x Right)

Bittydesign Clips Kit for 1/10 Off/On-road Bodies (Blue, 8pcs)(4x Left + 4x Right)

The LSM19 project express the desire to create something different on the market thanks to some aerodynamic solutions that make the body immediately recognizable due to its futuristic lines and a placement of the cab never seen before in this category.

The unconventional

We like to think differently and adopt aesthetic and aerodynamic solutions that deviate from the "standard", for this reason, inspired by the latest futuristic projects and concepts of the most important car manufacturers we have decided to create a body that encloses these innovative elements.

The forward placement of the cab is the element that identifies the design, giving the body not only a scenic and aesthetic detail different from the usual but also reflects on the performance on the track.

Developed for pure performance

During the design stage, the attention was focused not only on aesthetics but especially on the surfaces and forms designed to obtain the best possible performance.

The design has been adapted to meet the specs of the 1/12 Pan-car class, the introduction of a generous front split and the advanced cab increase the steering and the closing of the model close to the slow turns, the two side bulkheads placed in the mid body contain the air flow that flows more to the rear increasing stability and balancing the body as a whole.

Features:

The body it's UNIVERSAL and fit all the 1/12 Pan-car chassis on the market; it respect all the international specs of the category and it's Efra approved.

• Made with high quality and genuine polycarbonate Lexan®
• Produced in Light Weight version as well Ultra Lite (ULT)
• Sold clear with protective film outside
• Included in the package a decal sheet pre-cut and windows mask

PROTOform Better Edge System: Replacement Sanding Bands for Sanding Drum (2 pack)

Premium Body Cushion O-ring for Touring car.

Protects inside body painting and positions bodyshell.

The body Marker Kit it's a very usefull accessory that allow you to mark perfectly the lower cutting line of your On-road body shell, in particular Touring 1/10 and Pan-car 1/12.

The kit is made up of an ergal pen holder that depending on the position where you use it varies the floor height of the blade tip from 6mm up to 9mm.

In the video is illustrated the simple use of the kit, once inserted the marker in its place just enough to drag it to the bottom of the bodyshell to get a perfect cut mark that remains constant (from 6 to 9mm) across the perimeter.

Yokomo Body Mount Patch 5mm (8pcs)

Yokomo Thin Body Mount Patch 6mm for Reinforcing Body Mount Holes (8pcs)

Yokomo Body Mount Patch 6mm (8pcs)

Use of the Liquid Mask
Compared to the traditional but now obsolete tape paper, aspects and advantages of our Masking Liquid are easily found:
- incredible time savings, the drawing up of liquid is really fast
- possibility to easily reach every point on the surface of the body, even the edges and areas where the lexan has articulated forms
- less usury of the cutting blade of your precision cutter
- greater cutting precision due to the fact that the liquid, once dried, is semi-transparent and facilitates a lot the possibility to follow the lines of your drawing
- no residue when removing the liquid (it may happen, however, if you continue to use an inadequate tape paper that after the removal of adhesive some glue residues remain on the surface of airbrushing; with Liquid Mask this will never happen)
- greater accuracy of airbrushing, with our liquid the color smear are no longer a problem

Product Features
- the Liquid Mask is is ready to use, you not need to dilute it
- it is water-based withour solvent, not harmful to health. You can safely use it even at home
- dries quickly when subjected to a jet of hot air
- once the package is opened, if stored properly it can last for several months
- with the 16oz format you can prepare about 20 buggy 1/8 bodies and about 12/13 1/10 touring bodies; with the 32oz bottle double quantities

Use of the Liquid Mask
Compared to the traditional but now obsolete tape paper, aspects and advantages of our Masking Liquid are easily found:
- incredible time savings, the drawing up of liquid is really fast
- possibility to easily reach every point on the surface of the body, even the edges and areas where the lexan has articulated forms
- less usury of the cutting blade of your precision cutter
- greater cutting precision due to the fact that the liquid, once dried, is semi-transparent and facilitates a lot the possibility to follow the lines of your drawing
- no residue when removing the liquid (it may happen, however, if you continue to use an inadequate tape paper that after the removal of adhesive some glue residues remain on the surface of airbrushing; with Liquid Mask this will never happen)
- greater accuracy of airbrushing, with our liquid the color smear are no longer a problem

Product Features
- the Liquid Mask is is ready to use, you not need to dilute it
- it is water-based withour solvent, not harmful to health. You can safely use it even at home
- dries quickly when subjected to a jet of hot air
- once the package is opened, if stored properly it can last for several months
- with the 16oz format you can prepare about 20 buggy 1/8 bodies and about 12/13 1/10 touring bodies; with the 32oz bottle double quantities

Bittydesign White Plastic Helmet Type-C (universal)

BLITZ MK9 Fronti (190mm) (0,7mm) Hatchback Body-shell

-High Downforce rear wing included, 2 different positions and
  height both adjustable.
-Fit all 190mm FF/FWD chassis.
-Body width 192mm, height 125mm(mounting with chassis).
-Wing height designed below the roof.
-Windows mask, light decal and wing mounting screw all included.