Bittydesign Clips Kit for 1/10 Off/On-road Bodies (Blue, 8pcs)(4x Left + 4x Right)

The LSM19 project express the desire to create something different on the market thanks to some aerodynamic solutions that make the body immediately recognizable due to its futuristic lines and a placement of the cab never seen before in this category.

The unconventional

We like to think differently and adopt aesthetic and aerodynamic solutions that deviate from the "standard", for this reason, inspired by the latest futuristic projects and concepts of the most important car manufacturers we have decided to create a body that encloses these innovative elements.

The forward placement of the cab is the element that identifies the design, giving the body not only a scenic and aesthetic detail different from the usual but also reflects on the performance on the track.

Developed for pure performance

During the design stage, the attention was focused not only on aesthetics but especially on the surfaces and forms designed to obtain the best possible performance.

The design has been adapted to meet the specs of the 1/12 Pan-car class, the introduction of a generous front split and the advanced cab increase the steering and the closing of the model close to the slow turns, the two side bulkheads placed in the mid body contain the air flow that flows more to the rear increasing stability and balancing the body as a whole.

Features:

The body it's UNIVERSAL and fit all the 1/12 Pan-car chassis on the market; it respect all the international specs of the category and it's Efra approved.

• Made with high quality and genuine polycarbonate Lexan®
• Produced in Light Weight version as well Ultra Lite (ULT)
• Sold clear with protective film outside
• Included in the package a decal sheet pre-cut and windows mask

PROTOform Better Edge System: Replacement Sanding Bands for Sanding Drum (2 pack)

Premium Body Cushion O-ring for Touring car.

Protects inside body painting and positions bodyshell.

The body Marker Kit it's a very usefull accessory that allow you to mark perfectly the lower cutting line of your On-road body shell, in particular Touring 1/10 and Pan-car 1/12.

The kit is made up of an ergal pen holder that depending on the position where you use it varies the floor height of the blade tip from 6mm up to 9mm.

In the video is illustrated the simple use of the kit, once inserted the marker in its place just enough to drag it to the bottom of the bodyshell to get a perfect cut mark that remains constant (from 6 to 9mm) across the perimeter.

Yokomo Body Mount Patch 5mm (8pcs)

Yokomo Thin Body Mount Patch 6mm for Reinforcing Body Mount Holes (8pcs)

Yokomo Body Mount Patch 6mm (8pcs)

Use of the Liquid Mask
Compared to the traditional but now obsolete tape paper, aspects and advantages of our Masking Liquid are easily found:
- incredible time savings, the drawing up of liquid is really fast
- possibility to easily reach every point on the surface of the body, even the edges and areas where the lexan has articulated forms
- less usury of the cutting blade of your precision cutter
- greater cutting precision due to the fact that the liquid, once dried, is semi-transparent and facilitates a lot the possibility to follow the lines of your drawing
- no residue when removing the liquid (it may happen, however, if you continue to use an inadequate tape paper that after the removal of adhesive some glue residues remain on the surface of airbrushing; with Liquid Mask this will never happen)
- greater accuracy of airbrushing, with our liquid the color smear are no longer a problem

Product Features
- the Liquid Mask is is ready to use, you not need to dilute it
- it is water-based withour solvent, not harmful to health. You can safely use it even at home
- dries quickly when subjected to a jet of hot air
- once the package is opened, if stored properly it can last for several months
- with the 16oz format you can prepare about 20 buggy 1/8 bodies and about 12/13 1/10 touring bodies; with the 32oz bottle double quantities

Use of the Liquid Mask
Compared to the traditional but now obsolete tape paper, aspects and advantages of our Masking Liquid are easily found:
- incredible time savings, the drawing up of liquid is really fast
- possibility to easily reach every point on the surface of the body, even the edges and areas where the lexan has articulated forms
- less usury of the cutting blade of your precision cutter
- greater cutting precision due to the fact that the liquid, once dried, is semi-transparent and facilitates a lot the possibility to follow the lines of your drawing
- no residue when removing the liquid (it may happen, however, if you continue to use an inadequate tape paper that after the removal of adhesive some glue residues remain on the surface of airbrushing; with Liquid Mask this will never happen)
- greater accuracy of airbrushing, with our liquid the color smear are no longer a problem

Product Features
- the Liquid Mask is is ready to use, you not need to dilute it
- it is water-based withour solvent, not harmful to health. You can safely use it even at home
- dries quickly when subjected to a jet of hot air
- once the package is opened, if stored properly it can last for several months
- with the 16oz format you can prepare about 20 buggy 1/8 bodies and about 12/13 1/10 touring bodies; with the 32oz bottle double quantities

Bittydesign White Plastic Helmet Type-C (universal)

BLITZ MK9 Fronti (190mm) (0,7mm) Hatchback Body-shell

-High Downforce rear wing included, 2 different positions and
  height both adjustable.
-Fit all 190mm FF/FWD chassis.
-Body width 192mm, height 125mm(mounting with chassis).
-Wing height designed below the roof.
-Windows mask, light decal and wing mounting screw all included.

Team Titan offers this great looking body for the front wheel drive class! The EK9 looks very good and impresses with a solid and fast handling as well. At the ETS in Vienna the body was used by Enrico Jung and Henrik Heitsch and they were able to finish 1st and 3rd overall! There is no better way to demonstrate a product on the biggest stage of onroad racing!

You will get the EK9 clear with window masks, overspray film and Team Titan decal sheet.

Bittydesign TYPE-6R F1 Clear Body

Mon-Tech 308 TCR 2.0 FWD Clear Body 190mm

Muchmore Aluminum Body Repair Tape (50x2000mm)

MR33 Aluminum Reinforced Tape 47mm x 1500mm

Tamiya 51664 Kar.-Satz Ford GT Mk.II 2020

Technische details:
- Bodykit van de Ford GT MK II (vanaf kit 58689)
- ongeverfd, inclusief decals en raamstickers
- inclusief toebehoren zoals spoilers, spiegels, etc.
- Te gebruiken met de optionele spoilerhouders (54510 en 54773)
- Wielbasis: 257 mm

Body-kit Mugen Honda CR-X Pro M-Chassis

Compatibel met M-03M, M-05, M- 05 PRO, M06 M07 M08 chassis wielbasis: 225mm (midden).

• Levering:
• ongespoten Lexan body
• toebehoren
• sticker

Wielbasis: 225mm
Lengte: 366mm
Breedte: 170mm

Tamiya nummer: 51467

EAN: 4950344514670

RC Body Parts Set Porsche 911 - GT3 Cup VIP 2007

Tamiya nummer: 51336

EAN nummer: 4950344513369