There are no products in your shopping cart yet.
Other Brands
13 / 37
Loading...
CORERC DOUBLE SIDED TAPE - 3 MTRS - CR750
€ 7,95
Widely regarded as the best type of tape in the industry. Easily adheres electrics to chassis, this clear tape is now available from CORE RC.
Relatively large roll at 3 metres in length but still suitable to fit in your tool bag with ease.
Sticks extremely well and peels off in one piece with no residue.
3m roll.
25mm width.
55mm diameter when new.
Approx 1mm thick.
DRY-FLUID EXTREME RC CAR - 20ML
€ 19,95
HIGH END SLIDE-LUBRICANT FOR LINKS, SHAFTS AND BEARINGS
BALSAM FOR RC CARS
DryFluid Extreme was specially developed for radio controlled model cars with the aim to preserve as long as possible or rather to extend significantly the efficiency and lifetime of these mechanical marvels.
The effect of this new lubricant for links, shafts and bearings begins where others show their limits. Lowest sliding friction, maximum speed and minimal dust and dirt binding were the main objectives of the development. Findings in the aviation and vehicle industries and the expert knowledge of RC car pilots are the driving forces behind this new lubricant.
SLIDE-LUBRICANT INSTEAD OF OIL
DryFLuid is a dry slide-lubricant rather than a classic oil or grease. DryFluid is not wax, it is neither greasy nor oily but is silicone-free. A long-lasting lubrication effect is achieved using dry particles, sliding polymers and high end sliding fluids. The application and long-term effects of DryFluid Extreme will inspire every RC pilot.
PRODUCT-FEATURES
Reduction of power loss on links, shafts and bearings and it guarantees a long life of the treated components.
Lowest sliding friction for free movement and wear reduction
Multistage lubricant system with immediate and long-term effects
Dust and dirt repellent
Extremely good creeping abilities
Excellent material compatibility with all current metal, plastic and natural rubber materials Outstanding adhesive and anti-corrosive properties
This is classed as a hazardous material by our shippers and consequently cannot be sent outside the UK by air transport.
Within the UK it can only be sent by UPS not post. Please only select UPS for the shipping method at the checkout.
ECLIPSE 5 - 1/12TH CIRCUIT - KIT
€ 349,99
The Schumacher Eclipse cars are the current reigning 1/12th scale IFMAR World and EFRA European Champions in both modified and stock classes.
The New Eclipse 5 features an extensive list of refinements, making it even faster and better handling.
The Eclipse 5 is the ultimate professional LMP12 racing chassis kit. The choice of champions!
- NEW - Alloy chassis design with a much shorter overall length. This allows for reduced chassis scrubbing along with a significant weight reduction from beyond both front and rear axles. These benefits allow the car to enter a corner more effortlessly and when in the corner, rotation is achieved more freely.
- NEW - Upgraded left and right rear hex wheel clamps to prevent any wheel wobble issues. Now perfectly true running wheels with our unique single nut rear wheels/solid axle!
- NEW - Servo mounting has been improved, resulting in direct mounting for the Sanwa micro range of servos such as the PGS-HR and SRG-HR. Direct and easy alignment onto the centre of the car. In doing this the chassis flexibility characteristics have been vastly improved, for performance and strength, by removing the large, off centre transverse slots previously used. All other brands of servo still can be used with the ultra-lightweight floating servo mount, included.
- NEW - Lightweight and flexible 3D printed rubber bumper, offering perfect body shell protection. Compared to the previous foam bumper, it is also very durable and long lasting.
- NEW - Black aluminium steering turnbuckles now included. Stealth and lighter weight.
- NEW - Updated top decks design, further reducing the polar moment of inertia. They now secure at the front within the wheelbase.
- NEW - The front lower beam has been improved, mounting in line with the front axle, and further reducing this forward weight, allowing for the reduced chassis length. The new beam makes use of super easy, slide in, speed secret ride height spacers. 0.5mm U7920 and 0.75mm U7921.
- NEW - Independent and lightweight front bumper mount makes front end assembly far easier. The front bumper can now be removed with only 2 screws.
- NEW - Moulded lighter weight front hub carrier design with much improved suspension action and damping characteristics. Un-sprung mass has also been reduced.
- NEW - Tweak free and easy LiPo mounting using new lighter weight O-ring fixing.
- NEW - Interchangeable front LiPo position stops with 4 equally spaced settings included.
- NEW - Optional 1.0° camber strap available. 1.5° camber is included in the kit for maximum steering and lap time in most conditions.
- NEW - Pod offset has been refined to achieve the perfect pod balance with a wider range of modern motors.
- NEW - Lightweight pod carbon parts for lower centre of gravity and overall car weight.
- NEW - Underside Variable Chassis chamfers, offering improved ground clearance, smoother scrubbing and better clearance to curbs or other corner markers.
Not forgetting all the usual features that have made the Eclipse IFMAR World and EFRA European Champion.
- Range of optional colour coded front springs.
- Big Bore side and centre dampers offering long lasting damping. They also give great damping oil retention (less frequent maintenance required) and a compact and central design. Damper geometry changes have improved damping characteristics.
- Lightweight pod assembly for smoother, more predictable drivability and bump handling. Strengthened for tweak prevention.
- Lightweight Low Centre of Gravity CNC Alloy Motor Mounts.
- Rear ride height adjusters, easier adjustment and 0.25mm height increments.
- Front beam socket using O-ring fixing system.
- Thread insert design making work on the car much quicker and simpler.
- Easy body shell height adjustment.
- Extra low rear roll centre pivot height for awesome rear traction.
- Centre pivot design for easy build and maintenance, with a fully bind free design.
- All black nuts as standard.
- Perfectly balanced rear pod assembly.
- Ultra-low motor position.
- Full range of colour coded rear and side springs.
- Separate springs for independent roll and bump stiffness adjustment.
- Ball bearing front and rear axles.
- Adjustable toe-in/out.
- Chassis balance pivot holes. For use with U3582 Precision Balance Pivot Set. (Available Separately) To optimise left/right weight distribution.
- Rear tweak adjustment via side springs.
- Simple rear droop adjustment.
- Small Kimbrough servo saver with stiffener included as standard.
- High tensile steel hex screws used throughout.
- High quality easy to follow instruction manual.
- Range of World Championship Winning Contact RC foam tyres available.
- Accepts a huge range of industry standard body shells, motors, LiPo’s and speed controllers.
- Suitable for USA rules GT12 racing.
|
|
Excel Double Honed Blade (5pcs)
€ 4,50
Features:
- Made from carbon steel, #11 Blades
- Available in packs of 5, 15, 100, 500, 1000
- The double honed replacement blade has a strong tip and flex so you do not have to worry about breaking their edge and tip.
- This versatile replacement blade fits with all standard light and medium duty Xacto style knives.
- Used with: cuts on paper, card-stock, stencils, film, photographs, tape, plastic, cork, wood, vinyl, cloth, leather, cardboard, foam boards and most other light-weight crafting.
- Used for: model making, paper cutting, cake decorating, Cricut vinyl cutting and polymer clay.
- Used by graphic artists, architects, car wrappers, designers, hobbyists, scrapbook artists and crafters.
- Fits with: K1, K3, K17, K18, K26, K30, & K71 handles
- L – 1.575/ H – 0.350 / E - 0.975/ S – 0.250/ T – 0.020
EXTRA LONG BODY CLIP 1/10 - FLUORESCENT RED (6)
€ 3,99
EXTRA LONG BODY CLIP 1/10 - FLUORESCENT RED (6)
EXTRA LONG BODY CLIP 1/10 - FLUORESCENT YELLOW (6)
€ 3,99
EXTRA LONG BODY CLIP 1/10 - FLUORESCENT YELLOW (6)
EXTRA LONG BODY CLIP 1/10 - METALLIC PURPLE (6)
€ 3,99
EXTRA LONG BODY CLIP 1/10 - METALLIC PURPLE (6)
Flysky FGr4D AFHDS3 Receiver 4CH
€ 54,95
Product information "Flysky FGr4D AFHDS3 Receiver 4CH"
The bidirectional FGr4D receiver is equipped with 4 channels and runs the AFHDS3 protocol. Thanks to the two built-in antennas and the compact design, there are numerous possible applications in the smallest of spaces. In addition to the four channels, the receiver also offers 5 functional interfaces that can be configured with different signal types such as i-BUS2, S.BUS, i-BUS and PPM. The FGr4D is also waterproof according to the PPX6 standard.
Technical Specifications
| PWM-Channels: | 4 |
| RF: | 2.4GHz |
| Protocol: | AFHDS 3 |
| Antennas: | Dual (internal) |
| Input Voltage: | 3.5-9V |
| Output: | PWM/PPM/i-BUS/S.BUS/i-BUS 2 |
| Temperature: | -10°C to +60°C |
| Max. Humidity: | 20%-95% |
| Update: | Yes, online |
| Dimensions: | 30.3x25.8x20mm |
| Weight: | 7.2g |
| Suitable for: | Cars, Boats |
| Compatible Transmitter: | all AFHDS3-Transmitter |
Flysky FS-GT2F 2 channel Radio Set with 1 ReceiverFlysky
€ 24,95
The FS-GT2F is a simple 2-channel 2.4GHz transmitter and it is ideal for getting started with controlling RC car models and boats. The transmitter runs on the AFHDS2A protocol and the remote control comes with a built-in antenna. It can also be easily connected to the computer via the micro USB port so that the radio can be used, for example, as a controller in games or simulation programs.*
Features:
- AFHDS 2A
- Multi-channel hopping frequency
- Multidirectional antenna with amplification
- Unique ID recognition system
- Low energy consumption
- Automatic setting of 1 or 2-way communication
- Reliable communication even over longer distances
Technical Specifications:
| Transmitter | ||
| Type: | 2.4055 - 2.475GHz | |
| Frequency Protocol: | AFHDS 2A and AFHDS | |
| Channels: | 2 | |
| RC Models: | Cars, Boats | |
| Distance: | 100 - 300m (Ground) | |
| Channel Resolution: | 1024 | |
| Battery: | 4x 1.5V AA | |
| Low Voltage Warning: | < 4.2V | |
| Antenna Type: | Built-in single antenna | |
| Display: | - | |
| Charging Interface: | - | |
| Data Interface: | Micro-USB (PPM) | |
| Temperature Range: | 0°C to +60°C | |
| Humidity Range: | 20% to 95% | |
| Online Update: | No | |
| Dimensions: | 150x80x196mm | |
| Weight: | 323g | |
| Receiver | FS-A3 | |
| Channels: | 3 | |
| Type: | 2.405 - 2.475GHz | |
| Frequency Protocol: | AFHDS 2A | |
| Suited Transmitter: | All transmitter with AFHDS 2A support | |
| Antenna Type: | Single (150mm) | |
| Voltage: | 4-6.5V | |
| Data Interface: | PWM | |
| RSSI: | No | |
| Temperature Range: | 0°C to +60°C | |
| Humidity Range: | 20% to 95% | |
| Online Update: | No | |
| Dimensions: | 35x22x12mm | |
| Weight: | 6g | |
Delivery:
- FlySky GT2F transmitter
- 1x receiver: FS-A3
- Manuals
Flysky Noble NB4 with 2 Receiver
€ 299,95
€ 274,95
Product information "Flysky Noble NB4 with 2 Receiver"
With the NB4 radio remote control from FlySky, driving an RC car or boat offers as much comfort as it offers technical specifications. After all, the remote control uses the new and extremely flexible AFHDS3 protocol for transmission while being ergonomically design.
In combination with this protocol, the advantages of a wireless WS2A system and the new 2.4GHz chip, a wide variety of transmitter parameters can be set dynamically. This includes channel number, channel resolution, range, anti-interference requirements and also latency. This makes it possible to freely adjust the transmitter to Your own needs via the 3.5 inch TFT display. The real-time data exchange between the transmitter and the receiver also enables increased control over the flight model with constantly updated information on temperature and speed, for example.
Features:
- Advanced and modern radio
- Ergonomic design with turnable wheel
- Suitable for both right and left handers
- Dual Battery System
- Intelligent RF configuration
- Less than 3ms latency
- Also suited for simulators and games without using an external dongle via USB
Technical Specificatons:
| Transmitter | ||
| Type: | 2.4GHz ISM | |
| Frequency Protocol: | AFHDS 3 | |
| Channels: | 4, 6, 8 (optional) | |
| Suited RC Models: | Car, Boat | |
| Distance: | >300m (Ground) | |
| Channel Resolution: | 4096 | |
| Battery: | - 1S / (4,2V) x 4300mAh LiPo - 2600mAh 18650 Dual Battery |
|
| Low Voltage Warning: | < 3,65V | |
| Antenna Type: | Built-in single Antenna | |
| Display: | HVGA 3,5-Zoll-TFT, Resolution 320x480px | |
| Simulator: | USB Simulator | |
| Charging Interface: | Micro-USB | |
| Data Interface: | Micro-USB | |
| Temperature Range: | -10°C bis +60°C | |
| Humidity Range: | 20% bis 95% | |
| Online Update: | Ja | |
| Size: | 129x114x190mm | |
| Weight: | 520g | |
| Receiver | ||
| FGr4 | FGr4S | |
| PWM: | 4 | 4 |
| Type: | 2.4GHz ISM | |
| Frequency Protocol: | AFHDS 3 | |
| Suited Transmitter: | Alle Sender mit AFHDS3-Unterstützung | |
| Antenna Type: | Einzelantenne | |
| Voltage: | 3,5-12V | 3,5-8,4V |
| Data Interface: | PWM/PPM/i-BUS/S.BUS | |
| Temperature Range: | -10°C bis +60°C | |
| Humidity Range: | 20% bis 95% | |
| Online Update: | Ja | |
| Size: | 29x22x16,2mm | 25.5x22x17,3mm |
| Weight: | 8g | 5,1g |
Delivery:
- FlySky "NB4" Transmitter
- Reveiver: FGr4 and FGr4S
- USB data cable
- Grip shell
- Springs (S, L)
- 2x transparent protection sticker
- Manuals
Flysky Noble NB4-Pro with 2 Receiver
€ 499,95
€ 489,95
Product information "Flysky Noble NB4-Pro with 2 Receiver"
The Noble Pro breaks traditional standards with new ideas and offers extensive setting options for racers, crawlers and other RC vehicles. This 18CH transmitter with 7 channel modes is ideal for any terrain and shows top performance even in the most difficult situations. In addition, the new 2CH "Extreme Mode" with a new frequency algorithm ensures unimagined performance with only little delay.
The most striking feature of the FlySky Noble Pro is the holder for smartphones and the steering wheel, the position of which can be changed so that both left and right-handers can get the best out of their vehicle all the same. Together with the comfortable shape of the handle, this is definitely an extremely ergonomic transmitter overall.
Features:
- Set consisting of over 20 parts such as transmitter, 2x receiver, case and much more
- Ideal for any off-road use, whether on-road, off-road or on the water
- 5 mixing setting options and speed segmentation for optimal adaptation to every riding requirement
- And three built-in high-performance chips for great performance
- Variety of structural personalization options (e.g. different throttle levers, springs, steering wheels, ... )
- Suitable for both right and left handers
- With 4 PWM and 8 PWM receivers as required
- Including 2 exchangeable batteries for 8 hours of action each
- Wireless charging station for convenient energy refueling
- Easy to use touch menu
Technical Specifications Transmitter:
| Type: | 2.4GHz ISM |
| Frequency Protocol: | AFHDS 3 |
| Channels: | 2 (fast), 4, 6, 8, 10, 12, 18 optional |
| Suited RC models: | Auto, Boot, also: Roboter, Ironclad |
| Distance: | < 300m |
| Channel Resolution: | 4096 |
| Battery: | 1S / (4,2V) LiPo & 18650 Dual-Battery |
| Low Voltage Warning: | < 3.65V |
| Antenna Type: | Built-in single antenna |
| Display: | HVGA 3,5-inch TFT color screen, resolution 320x480px, LCD white backlight, capacitive touch screen |
| Simulator: | USB Simulator |
| Charging Interface: | Micro-USB und kabelloses Laden |
| Data Interface: | Micro-USB |
| Temperature Range: | -10°C to +60°C |
| Humidity Range: | 20% to 95% |
| Online Update: | Yes |
| Size: | 120x144x274mm |
| Weight: | 670g (include stand) |
Technical Specifications Receivers:
| FGr4B | FGr8B | |
| PWM: | 4 | 8 |
| Type: | 2.4GHz ISM | |
| Frequency Protocol: | AFHDS 3 | |
| Suited Transmitter: | Suitable for all transmitter supporting the AFHDS3 | |
| Antenna Type: | Single antenna | |
| Voltage: | 5.3-9V | |
| Data Interface: | PWM/PPM/i-Bus/s.bus/i-Bus2 | |
| Temperature Range: | -10°C to +60°C | |
| Humidity Range: | 20% to 95% | |
| Online Update: | Yes | |
| Size: | 17x29x16.6mm | 35x23.3x13.3mm |
| Weight: | 6.4g | 9.4g |
Delivery:
- FlySky "Noble Pro" transmitter
- Receivers: FGr4B and FGr8B
- Hard case including key
- USB data cable
- Wireless charging station
- Grip shell (XL)
- Wrist strap
- Steering wheel and sponge (L)
- 1.5mm and 2.5mm wrench
- Brake pad set
- Thread adjusting screw
- Knob
- Springs (S, L)
- Throttle (S, L, Plastic)
- Back & angle bracket
- Sticker (company logo, various)
Related links to "Flysky Noble NB4-Pro with 2 Receiver"