CARBON LOOK BOX MMC 
MATEN:
LENTE 17CM
BREEDTE 10CM
HOOGTE 4CM

CARSON LADER 1A
CARSON ACCU 2100 MINH
4X AA PENLICHT

• Aluminium handvat met beschermdop
• Voor gaten tot 14mm
• Traploos boren

Inbussleutel 1,5 mm

• Gehard staal
• Aluminium handvat

Inbussleutel 2,0 mm

• Gehard staal
• Aluminium handvat

Inbussleutel 2,5 mm

• Gehard staal
• Aluminium handvat

904063 Kogellagerset CC-02 Chassis (22)

ceed Tyre Additive Applicator Pen (with 2 Glass Balls) - 10mm Tip

Xceed refillable tire additive applicator pen 10mm tip is made of high end material. With this medium length and long grip pen body,  you can be filled with your choice of tyre traction compound easily with this applicator brush ensuring evenly soaking of the tyre surface. The transparent design ensures easy recognition of the remaining fill level too.

Specifications:

Ceramic Bearing 1/8x5/16x9/64 Flanged (pr)SCHUMACHER

Schumacher Bearing Guidlines

Yellow = ABEC5, oil filled, shielded, steel balls recommended for relatively clean conditions. Schumacher On Road cars kit specification.
Red = ABEC5, grease filled, double rubber seals, steel balls recommended for wet or dirty conditions. Schumacher Off Road cars kit specification.
Orange or Grey = ABEC 5, oil filled, shielded, extra hard ceramic balls for higher efficiency. Recommended for On Road.
Black = Pro High Precision German or Japanese manufactured, rubber seal. Recommended for Off Road.
Metal = Pro High Precision German or Japanese manufactured, shielded. Recommended for On Road.

charge lead with dummy-glow plug style connector, to use for glow-heater.

2S Lipo charge lead with 4mm charger input plugs and 4-5mm battery plugs, including 2mm balance plug. 600mm. Extremely versatile, suits a wide range of chargers!

2S Lipo charge lead with 4mm charger input plugs and 4-5mm battery plugs, including 2mm balance plug. 600mm. Extremely versatile, suits a wide range of chargers!

2S Lipo charge lead with 4mm charger input plugs and 4-5mm battery plugs, including 2mm balance plug. 600mm. Extremely versatile, suits a wide range of chargers!

Great charging lead for charging receiver and transmitter packs.  4mm input connectors and Futaba output.

- An extremely useful charge lead which can charge and balance two 2S Lipo's simultaneously and acts as 4S charge leads. - Available in 4 colours, Black, Blue, Red and Orange. - 10 AWG wire - 600mm in length - Balance wire 22AWG  4S/5pin XH on charger side - Nylon covering and extremely well made -

Charge Leads XT60 to XH2S Balance Black - Short 2S Lipo charge lead with XT60 charger input plug and 4-5mm battery plugs, including 2mm balance plug. 300mm. Extremely versatile, suits a wide range of chargers!

Charging Cable XT60 - XT90/XT60/T-plug/Tamiya/FUT/JR

Ideal for cutting circles, especially good for cutting wheel arches in bodyshells. The Pro drivers method!! Includes spare blades and also lead pencil for drawing circles. Use a 34mm radius or 68mm diameter for perfect 1/10th touring car wheel arches. Radius adjustable from 10mm to 150mm. 

Connector : female JST (10pcs)

Connector : JR Male plug (10pcs)