There are no products in your shopping cart yet.
NEW
Â
11 / 73
Loading...
54992 CC-02 demper veer set (3x2) ID12
€ 17,95
54992 CC-02 demper veer set (3x2) ID12
CC-02 demper veer set (3x2) ID12
• CC-02 aluminium demperveren (zacht) x2
• CC-02 aluminium demperveren (medium) x2
• CC-02 aluminium demperveren (hard) x2
• Slanke veren zijn speciale ontwerpen voor artikel 54991, die de ophanging verbeteren en een realistisch uiterlijk geven.
• Binnendiameter: 12,6 mm, lengte: 50 mm.
• Veren zijn wit, met gekleurde markeringen voor differentiatie (zacht: rood, medium: geel, hard: blauw)
• Compatibel met CC-02 chassis-auto's met artikel 54991.
Tamiya nummer: 54992
ALU CUTTED ANTI-ROLL BAR COLLAR o2.7 - BLACK (2), X343483-K
€ 13,95
ALU CUTTED ANTI-ROLL BAR COLLAR o2.7 - BLACK (2), X343483-K
Short Course Tyre - Mini Spike - Blue (pr)SCHUMACHER
€ 17,95
Short Course Tyre - Mini Spike - Blue (pr)SCHUMACHER
A great tyre for Astro and Carpet. Available in Blue - Hard, Yellow - Soft and Silver - very soft compounds.
This tyre has maximum traction and aggression. To tune the car it maybe required to trim some pins from the front tyres for less bite, or try Blue front, Yellow rear.
Supplied in pairs without inserts.
We recommend a firm insert.
Short Course Wheel - Black +3 offset pr SCHUMACHER
€ 7,50
Short Course Wheel - Black +3 offset pr SCHUMACHER
Our new 6 spoke, extremely detailed wheels are available in black and white. With industry standard fittings they are suitable for a whole host of vehicles that have a 12mm hex and +3mm offset.
Tough lightweight design yet extremely strong.
Wheel Fitting - Hex - 12mm and +3mm offset
SupaStox GT12 Body - Type L
€ 22,50
SupaStox GT12 Body - Type L
This new awesome looking body is aggressively styled and supplied with a wing, lights and grill decals, window masks, wing mounting hardware and over spray film.
Suitable for the SupaStox and SupaStox GT plus other 1/12th Circuit GT12 cars.
BRCA Approved.
CORE RC Hi Response TC Spring 2.1 - Red
€ 7,95
CORE RC Hi Response TC Spring 2.1 - Red
CORE RC Hi Response springs for 1/10th Touring and FWD cars.Developed by Schumacher engineers and high level drivers, these new springs bring a new dimension to 1/10th Touring.
These springs have been designed to improve responsiveness of the cars compared to the competition.
Featuring less coils and having a thinner wire diameter they offer over a 40% weight saving over the competition, a significant 5.2g per set of 4.
CORE RC provide a wide linear range from 1.9 N/mm to 3.5 N/mm and also a progressive spring measuring 2.2-2.9
19mm in length.
Three easy to buy, pairs of 4 are available as sets;
CR852 Soft; including 1 pair of 1.9, 2.1, 2.3 and 2.2-2.9 progressive.
CR853 Medium; including 1 pair of 2.5, 2.6, 2.7 and 2.8
CR854 Hard; including 1 pair or 2.9, 3.1, 3.3 and 3.5
Motor Mount Weight 26g - Mi9 SCHUMACHER
€ 38,95
Motor Mount Weight 26g - Mi9 SCHUMACHER
The Mi9 has been refined in many key areas, optimising it’s centre of gravity, unsprung mass and reducing it’s polar moment of inertia with tactical weight reductions.
With this in mind, we have introduced motor mount weights allow for the perfect placement of additional weight in order to meet weight regulations in the best possible way.
Two versions available:
This one, U8816 – Motor Mount Weight 26g which allows power roller to be fitted, maximum pinion size 37T 48dp 50T 64dp.
And also U8815 – Motor Mount Weight 22g with Stock racing in mind with maximum pinion size 37T 48dp 50T 64dp.
The weights are attached to the kit motor mount.
M3 Black Alloy Washers 3.00mm (pk10)SCHUMACHER
€ 4,50
M3 Black Alloy Washers 3.00mm (pk10)SCHUMACHER
M3 Black Alloy Washers 1.00mm (pk10)SCHUMACHER
€ 4,50
M3 Black Alloy Washers 1.00mm (pk10)SCHUMACHER
M3 Alloy Washer Black 1.5 mm (pk10)SCHUMACHER
€ 4,50
Vul hieronder de algemene informatie van het product in. Dit zijn de basisgegevens van een product. De productnaam is een verplicht veld omdat deze altijd getoond wordt.
live_help
Ja
Nee
SCHUMACHER Gear Diff Set (Steel Axle) - Icon/2
€ 49,95
Gear Diff Set (Steel Axle) - Icon/2
Designed and developed by our engineering and race team, this gear differential offers several great improvements over the ball differential design.- Consistent and easy setting with less frequent maintenance, with very little change from race to race.
- Improved handling ability with more stable cornering entry, and improved mid and particularly exit rotation.
- Fully ball raced for high precision, performance and lower maintenance.
- Steel axle for strength and reliability.
- 60T 48dp spur included.
- The oil viscosity can be adjusted, to offer greater tunability than the ball differential.
(700cSt-2000cSt) suited to low grip conditions.
(2000cSt-5000cSt) suited to medium grip conditions.
(5000cSt-15000cSt) suited to high grip conditions.
- The (removed kit) ball differential may still be used when the track grip is low, but in other conditions this gear differential should always offer more potential.
Ball Diff – Easiest to drive – best for low grip tracks.
Gear Diff – Moderate to drive – best for all round conditions with tunability with the correct oil.
- U8353 Optional carbon axle available for ultimate performance, 8g lighter.
Body Reamer 0-14mm
€ 11,95
Product information "Rockamp Body Reamer 0-14mm"
Solidly processed Lexan drill for work in the 0-14mm range.
Technical Specifications
| Size (Handle): | 133x18.8mm |
| Length (Attachment): | 46mm |
| Weight (all): | 52g |
NEON MTC - C/F - Kit SCHUMACHER
€ 365,00
Schumacher’s world championship winning engineering team have applied their knowledge and experience to create the NEON MTC Mini Touring Car. The NEON is already a proven winner at British BRCA National races. It features class leading suspension geometry, and transmission efficiency, to make a well balanced car that is easy to drive fast. The NEON will bring out the best in your driving skills, to move you up the rankings in this fun and competitive racing class.
Dealer Pre-Orders Being Taken - Due Mid October
- New – Double wishbone suspension design. Refined over countless hours by our team drivers and in-house development engineers to provide maximum performance across all track conditions.
- New – Upper and Lower wishbones. Lightweight and stiff.
- New – Fixed length upper wishbones. Pre-defined camber and castor for less maintenance and performance straight from the box.
- New – Lightweight front spool assembly with replaceable lightweight outputs.
- New – Proven gear differential with steel outputs. Reliability assured.
- New – Moulded transmission housing. Lightweight and robust.
- New – Double Joint Front Driveshaft. Utilising our proven joint design for great durability.
- New – Rear Driveshaft. Ultra hard wearing Steel.
- New – Short shocks. Featuring Alloy bodies, machined pistons, low friction shafts, and lightweight moulded upper socket.
- New – Steering Arms for optimal Ackermann setting.
- New – Layshaft assembly. Lightweight and durable.
- New – Lightweight motor mount design with optional top deck stiffener screw.
- New – Lightweight moulded wheel hexes.
- New – Floating Servo Mount. Low centre of gravity design that does not impact on chassis flex.
- New – Lower shock mount. Simple and lightweight.
- New – Twist free front and rear shock mount designs.
- New – Diff/Spool eccentrics for easy belt tension adjustment, with the ability to change the diff/spool height.
- New – Vertical or rear facing body posts to suit user preference for bodyshell mounting.
- New – Adjustable battery mounting in front-rear and left-right directions. Balance the car to suit any condition.
- New – High quality Bando 105T belts. Flexible, efficient and durable drivetrain.
- Hub carrier design provides precise wheel control and performance.
- Optional Anti-roll bars.
- Rear track rods for infinite adjustment of rear toe-in. This can be tuned for the use of passive rear steering / toe-in change.
- Arrowmax 48dp 81T Spur Gear included in the kit.
- Fully ball-raced transmission.
- Body pictured is Bittydesign Hyper-M
|
|
NEON MTC - S2 - Kit SCHUMACHER
€ 249,95
NEON MTC - S2 - Kit SCHUMACHER
Schumacher’s world championship winning engineering team have applied their knowledge and experience to create the NEON MTC Mini Touring Car. The NEON is already a proven winner at British BRCA National races. It features class leading suspension geometry, and transmission efficiency, to make a well balanced car that is easy to drive fast. The NEON will bring out the best in your driving skills, to move you up the rankings in this fun and competitive racing class.
Dealer Pre-Orders Being Taken - Due Mid October
- New – Double wishbone suspension design. Refined over countless hours by our team drivers and in-house development engineers to provide maximum performance across all track conditions.
- New – Upper and Lower wishbones. Lightweight and stiff.
- New – Fixed length upper wishbones. Pre-defined camber and castor for less maintenance and performance straight from the box.
- New – Lightweight front spool assembly with replaceable lightweight outputs.
- New – Proven gear differential with steel outputs. Reliability assured.
- New – Moulded transmission housing. Lightweight and robust.
- New – Double Joint Front Driveshaft. Utilising our proven joint design for great durability.
- New – Rear Driveshaft. Ultra hard wearing Steel.
- New – Short shocks. Featuring Alloy bodies, machined pistons, low friction shafts, and lightweight moulded upper socket.
- New – Steering Arms for optimal Ackermann setting.
- New – Layshaft assembly. Lightweight and durable.
- New – Lightweight motor mount design with optional top deck stiffener screw.
- New – Lightweight moulded wheel hexes.
- New – Floating Servo Mount. Low centre of gravity design that does not impact on chassis flex.
- New – Lower shock mount. Simple and lightweight.
- New – Twist free front and rear shock mount designs.
- New – Diff/Spool eccentrics for easy belt tension adjustment, with the ability to change the diff/spool height.
- New – Vertical or rear facing body posts to suit user preference for bodyshell mounting.
- New – Adjustable battery mounting in front-rear and left-right directions. Balance the car to suit any condition.
- New – High quality Bando 105T belts. Flexible, efficient and durable drivetrain.
- Hub carrier design provides precise wheel control and performance.
- Optional Anti-roll bars.
- Rear track rods for infinite adjustment of rear toe-in. This can be tuned for the use of passive rear steering / toe-in change.
- Arrowmax 48dp 81T Spur Gear included in the kit.
- Fully ball-raced transmission.
- Body pictured is Bittydesign Hyper-M
|
|
TAMIYA Opel Kadett GT/E (Gelakte Carrosserie) (MB-01)47499
€ 174,95
TAMIYA-Opel-Kadett-GT/E-(Gelakte-Carrosserie)-(MB-01)47499
Deze Kadett wordt geleverd met een geverfde body
Hier is nog een RC-kit met het MB-01-chassis - dit keer met een lange wielbasis en midden-achter/achterwielaandrijving (MR).
Aandrijving (MR). De Opel Kadett GT/E, die in 1975 op de markt kwam, was een high-spec versie van
de Opel Kadett, een auto die in de jaren 1970 grote populariteit genoot in Europa. De GT/E had een tweedeurs coupécarrosserie, een krachtige 1,9-liter motor
en een versterkte ophanging; Het fabrieksteam van de Opel Eurodealer, satellietteams en privérijders namen deel aan rallyraces met
aangepaste versies van dit voertuig en behaalden in 1976 de tweede plaats in het constructeurskampioenschap
in de wereldwijde rallyraces.
Over het model
- Dit is een 1/10 schaal R / C modelbouw. Lengte: 417 mm, Breedte: 174 mm, Hoogte: 138 mm. Wielbasis: 239 mm (lange wielbasis).
- De vorm van de Opel Kadett GT/E is authentiek nagemaakt in lichtgewicht polycarbonaat en er is gebruik gemaakt van het kleurenschema van het fabrieksteam van Opel Eurodealer.
- Met 60 mm voor- en achterbanden. Gebruik 60D-banden bij het verwisselen van banden.
- Carrosserie is voorgespoten.
Over het MB-01 chassis
Het compacte 2WD chassis van de MB-01 biedt de keuze uit drie wielbasistypes en voor- of achterwielaandrijving.
Systeem. Zonder de accu, motor en RC-uitrusting uit het midframe te verwijderen, kunt u eenvoudig de
stuurstang gebruiken om te schakelen tussen voor- en achterwielaandrijving; Voor achterwielaandrijving kan voor voertuigen met achterwielaandrijving worden gekozen voor een lage of
hoge motorstand. De 4-wielige ophanging met dubbele draagarmen heeft een
symmetrische constructie en wrijvingsdempers. Uniforme onderdelen zoals de motorsteun, de eindversnellingsbak en de ophanging
vergemakkelijken de montage en het effectieve onderhoud.
Technische gegevens:
- Kitmodel in
schaal 1/10- MB-01 chassis met 2WD-aandrijving-
Lengte: 417 mm, Breedte: 174 mm, Hoogte: 138 mm, Wielbasis: 239 mm (L)
- Prototypische, gelakte carrosserie van polycarbonaat
- M-chassis velgen 60 mm banden voor en achter
- Krachtige 540-motor inbegrepen
- Onafhankelijke wielophanging voor en achter
- Elektronische snelheidsregeling
- Optionele onderdelen optioneel verkrijgbaar
Killerbody Subaru Impreza WRC 2007 finished body
€ 74,95
Killerbody Subaru Impreza WRC 2007 finished body
Product information "Killerbody Subaru Impreza WRC 2007 finished body"The body of the Subaru Impreza WRC 2007 is a detailed replica of the official Japanese cult car - known from several world rally competitions. Every detail corresponds to the original and looks great. This guarantees you fast and entertaining rides as a mini rally car.
Contents:
Painted body / transparent windows / transparent front and rear lights / decal set / racing sticker decals / small parts set / assembly instructions
Killerbody Lancia Delta HF Integrale Karosserie Rally-Racing 195mm RTU
€ 74,95
Killerbody Lancia Delta HF Integrale Karosserie Rally-Racing 195mm RTU
Killerbody LED Licht Set mit 18 LED inkl Kontroller Box
€ 18,95
Killerbody LED Licht Set mit 18 LED inkl Kontroller Box
Killerbody LED Licht Set mit 10 LED inkl Kontroller Box
€ 17,50
Killerbody LED Licht Set mit 10 LED inkl Kontroller Box
Product information "Killerbody LED Licht Set mit 10 LED inkl Kontroller Box"Easy and quick installation of the Killerbody LED Light Set for RC Car Bodies. It can be used for nearly any 1/10 Chassis or Body. Perfectly it fits of course in the Killerbody Body shells as some of them already has a LED fixing system included. All wires are ready to connect so that it is not necessary to solder.
Especially in the night your car will look way more realistic but also will show a great performance during the day time.
Thanks to the controller box you can control the LED related to your transmitter like by braking, turning, etc. but you also can have a signal light or headlight function (all is related to the settings and used LED's - related to the configuration)
Scope of Supply:
- 1x LED Controller Box
- 1x Connection wire
- 1x LED Set with 10 LED's (2x white / 2x blue / 2x red / 4x orange)
Killerbody LED Licht Set mit 4 LED inkl Kontroller Box
€ 13,95
Killerbody LED Licht Set mit 4 LED inkl Kontroller Box
Product information "Killerbody LED Licht Set mit 4 LED inkl Kontroller Box"Easy and quick installation of the Killerbody LED Light Set for RC Car Bodies. It can be used for nearly any 1/10 Chassis or Body. Perfectly it fits of course in the Killerbody Body shells as some of them already has a LED fixing system included. All wires are ready to connect so that it is not necessary to solder.
Especially in the night your car will look way more realistic but also will show a great performance during the day time.
Thanks to the controller box you can control the LED related to your transmitter like by braking, turning, etc. but you also can have a signal light or headlight function (all is related to the settings and used LED's - related to the configuration)
Scope of Supply:
- 1x LED Controller Box
- 1x Connection wire
- 1x LED Set with 4 white LED's
Killerbody LED Licht Set mit 6 LED inkl Kontroller Box
€ 13,95
Killerbody LED Licht Set mit 6 LED inkl Kontroller Box
roduct information "Killerbody LED Licht Set mit 6 LED inkl Kontroller Box"Easy and quick installation of the Killerbody 6mm-LED Light Set for RC Car Bodies. It can be used for nearly any 1/10 Chassis or Body. Perfectly it fits of course in the Killerbody Body shells as some of them already has a LED fixing system included. All wires are ready to connect so that it is not necessary to solder.
Especially in the night your car will look way more realistic but also will show a great performance during the day time.
Thanks to the controller box you can control the LED related to your transmitter like by braking, turning, etc. but you also can have a signal light or headlight function (all is related to the settings and used LED's - related to the configuration)
Scope of Supply:
- 1x LED Controller Box
- 1x Connection wire
- 1x LED Set with 6 white LED's
SkyRC Charging Cable XT60 for Battery with EC5 Connector
€ 4,95
SkyRC Charging Cable XT60 for Battery with EC5 Connector
SkyRC Charging Cable XT60 for Battery with EC3
€ 4,95
SkyRC Charging Cable XT60 for Battery with EC3
MMC/RACINGLINE-PITMAT KLEIN 60X40CM
€ 12,50
Mooie pit mat van marco's model cars / racingline-rc
lengte 60cm breedte 40cm
een must voor elke hobbyist
MMC/RACINGLINE-PITMAT MIDDELGROOT 80X40CM
€ 14,95
Mooie pit mat van marco's model cars / racingline-rc
lengte 80cm breedte 40cm
een must voor elke hobbyist
Hobbywing Xerun XR10 Pro G3 Brushless ESC 160A, 2s LiPo
€ 219,95
Hobbywing Xerun XR10 Pro G3 Brushless ESC 160A, 2s LiPo
Product information "Hobbywing Xerun XR10 Pro G3 Brushless ESC 160A, 2s LiPo"The Hobbywing XeRun XR10 Pro G3 sets new standards for competition ESCs and raises the performance level with many innovative features. Compared to its predecessor, the XR10 Pro G2S, the ESC is now equipped with a frameless and improved fan. Additionally, the optimized LCG design has reduced the height by 2 mm, leading to a lower center of gravity and improved vehicle balance. Moreover, the XR10 Pro G3 features an integrated data logging module that can store up to 19 data sets of 20 minutes each, eliminating the need for a constant connection to the OTA Bluetooth module.
In addition to the integrated data logging, the G3 comes with many interesting new features! The freewheeling function ensures more efficient cooling by noticeably lowering the operating temperature compared to its predecessor. The new Disc Brake Mode allows extremely precise and linear brake force control, making braking consistent and controllable across all speeds. With over 44 programmable parameters and two adjustment levels, the settings can now be better tailored to any situation.
Features:
- Integrated data logging (OTA/LCD required for analysis)
- Optimized temperature control
- Disc Brake Mode for precise brake control
- 44+ parameters
- Softening 2.0
- LCG design and optimized wiring
- Built-in reverse polarity protection
- Optimized for modified competitions
Technical Data:
| Type: | Brushless, Sensored |
| Current (continuous/peak): | 160A / 1200A |
| Input Voltage: | 2S LiPo |
| BEC: | Switch Mode 5V-7.4V @ 5A |
| Motor Types: | Touring Car: 4.5T+, Buggy: 5.5T+, 3650 (540) Size 2-Pole Motor |
| Fan: | Yes, powered by the BEC |
| Programming: | LCD programming box, OTA programming module |
| Size: | 35 x 33.6 x 30.3mm |
| Weight: | 93g (without cables) |
| Applications: | 1/10 |
Accessories (optional):
HW30502001 LCD programming box
HW30850400 OTA programming module
Related links to "Hobbywing Xerun XR10 Pro G3 Brushless ESC 160A, 2s LiPo"
Hobbywing Xerun XR10 Pro G3X Brushless ESC 160A, 2s LiPo
€ 219,95
Hobbywing Xerun XR10 Pro G3X Brushless ESC 160A, 2s LiPo
Product information "Hobbywing Xerun XR10 Pro G3X Brushless ESC 160A, 2s LiPo"The Hobbywing XeRun XR10 Pro G3X sets new standards for competition ESCs and raises the performance level with many innovative features. Compared to its predecessor, the XR10 Pro G2S, the ESC is now equipped with a frameless and improved fan. Additionally, the optimized LCG design has reduced the height by 2 mm, leading to a lower center of gravity and improved vehicle balance. Moreover, the XR10 Pro G3X features an integrated data logging module that can store up to 19 data sets of 20 minutes each, eliminating the need for a constant connection to the OTA Bluetooth module.
In addition to the integrated data logging, the G3X comes with many interesting new features! The freewheeling function ensures more efficient cooling by noticeably lowering the operating temperature compared to its predecessor. The new Disc Brake Mode allows extremely precise and linear brake force control, making braking consistent and controllable across all speeds. With over 44 programmable parameters and two adjustment levels, the settings can now be better tailored to any situation.
Compared to the G3 standard version in black, the G3X delivers a more aggressive power output and comes standard with 12AWG wires and no reverse polarity protection.
Features:
- Integrated data logging (OTA/LCD required for analysis)
- Optimized temperature control
- Disc Brake Mode for precise brake control
- 44+ parameters
- Softening 2.0
- LCG design and optimized wiring
- Optimized for stock competitions
Technical Data:
| Type: | Brushless, Sensored |
| Current (continuous/peak): | 160A / 1200A |
| Input Voltage: | 2S LiPo |
| BEC: | Switch Mode 5V-7.4V @ 5A |
| Motor Types: | Touring Car: 4.5T+, Buggy: 5.5T+, 3650 (540) Size 2-Pole Motor |
| Fan: | Yes, powered by the BEC |
| Programming: | LCD programming box, OTA programming module |
| Size: | 35 x 33.6 x 30.3mm |
| Weight: | 93g (without cables) |
| Applications: | 1/10 |
Accessories (optional):
HW30502001 LCD programming box
HW30850400 OTA programming module
Intellect MC3 10000mAh 120C 7.6V Long Runtime Graphene Stick Pack LiHV
€ 94,99
Intellect MC3 10000mAh 120C 7.6V Long Runtime Graphene Stick Pack LiHV
As the leading manufacturer of lithium batteries for RC car modeling, Intellect presents its new MC3 LiHV battery series.
The MC3 series is the further development of the PT2 Platinum series. It sets a new standard in the RC car scene.
Intellect has a suitable battery in its range for most RC car applications.
Specifications:
- Capacity: 10000mAh
- Nominal Voltage: 7.6V / 2S
- Discharge-Rate: 120C
- Cell Type: Silicon-Graphene Lithium-Polymer
- Length: 139mm
- Width: 47mm
- Height: 25.1mm
- Weight: 335g
- Plug: 5mm
Charging and storage instructions:
Never store your batteries fully charged and or fully discharged. We recommend to store the batteries at the nominal voltage of the battery. We also recommend to use the batteries regulary, if you don't go to the track, then cycle them once every two weeks. The batteries must not be stored in direct sunlight, this also includes your car during a hot summer day. For a long lifetime of your batteries we recommend a charging rate of 1C. A higher charging rate will decrease the lifetime of your battery significantly.
We recommend to use a lipo bag during charging your battery: RUDDOG HD LiPo Ladetasche (180x80x80mm)
Installation:
When installing you battery, we recommend not to place them directly next to your motor. Should it not be possible to place your battery at a different place we strongly recommend the use of a motor fan to keep your motor cool and so also your battery. If you are looking for a motor fan, check out the RUDDOG aluminium fans, which are available in a 30mm and 40mm variant: RUDDOG 30mm Aluminium HV High Speed Cooling Fan and RUDDOG 40mm Aluminium HV High Speed Cooling Fan
Intellect batteries come including battery plugs. If you need additional plugs, you can find a wide range of plugs here: Stecker - RUDDOG Distribution GmbH
Limited Warranty:
We offer the German legal warranty time on all of our batteries. Inproper usage or storage can void this warranty.
Please note:
We do not currently ship LiPo or LiHV batteries outside mainland Europe.
ORCA Mini Level Board (for Hudy Setup Board and others)
€ 39,95
ORCA Mini Level Board (for Hudy Setup Board and others)
Bittydesign HYPER-GT8 1/8 GT clear body 325mm (LW | 1.0mm)
€ 43,95
Bittydesign HYPER-GT8 1/8 GT clear body 325mm (LW | 1.0mm)
TAMIYA TA07 Carbon Stiffener (Center)
€ 26,95
TAMIYA TA07 Carbon Stiffener (Center)
TA07 Carbon Stiffener (Center)
Increase your setup options for the TA07 PRO chassis with this 2mm thick carbon fiber center stiffener. This lightweight and rigid part fits neatly onto the center brace and rear stiffeners for more rigidity and stiffer pitch damping.
Item Contents
•Carbon Fiber Stiffener (Center) x1
•Screws for attachment included.
•This item pairs perfectly with carbon fiber front (Item 54788) and rear (Item 54789) stiffeners.
•Compatible with TA07 PRO chassis cars.
SCHUMACHER Ultra Short Shock Piston 4H pr - Mi6-9,FT8
€ 5,50
SCHUMACHER Ultra Short Shock Piston 4H pr - Mi6-9,FT8
Â