RTR-Kits

1:10 ABSIMA EP Desert Buggy "ADB 1.4" 4WD green RTR

• 4WD all-wheel drive
• 2.4GHz remote control
• Extremely durable composite plastic parts
• Fully adjustable suspension
• Ball bearing drive
• Adjustable 16mm Big Bore shocks
• Steel differential outputs
• 5mm aluminum motor mount
• 5mm aluminum shock towers
• Aluminum driveshaft
• 2 cone differentials (front/rear)
• LED light bar front and rear
• Extremely detailed body with add-on parts
• Vehicle can be powered by 2-cell LiPo batteries (up to 30C)
• Scale: 1:10
• Dimensions (L/W/H): 500x270x165 mm
• Weight: 2060g
• Wheelbase: 290mm
• Ground clearance: approx. 45mm
• Track width: 215mm front / 210mm rear
• Tires front/rear Ø: 110mm / Width: 45mm
• Damper oil: 400CPS
• Damper installation length: 80mm
• Motor ratio brushed version: Pinion: 21Z / Main gear: 77Z (48dp)
• Dessert Buggy "ADB1.4" Brushed Version
• 2.4GHz Remote Control CR2SV2
• Mini tool kit
• Instruction manual

1:16 EP BL Touring Car "FUN MAKER" stars'n grey RTR absima

REMOTE CONTROL & STEERING:
 
A 2.4GHz remote control system is of course standard today! With our radio you also have the possibility to throttle the speed via a rotary control, if someone wants to take the control who is not yet so skilled. The steering takes over a fast steering servo with an actuating force of 2.2kg. This means that nothing stands in the way of the first drift attempts on smooth surfaces such as tiles or wooden floors.The optimal fun mobile for any smooth surface! 
      
 
FEATURES:

• 4WD All Wheel Drive
• 2.4GHz remote control
• Full ball bearing drive
• Aluminum chassis, upper deck and shock towers
• Aluminum "big bore" shock absorbers
• CVD axles on front axle
• Heavy duty front & rear differentials
• Aluminum propshaft
• LED lighting front & rear
• Extremely detailed body with sticker sheet

SPECIFICATION:

• Scale: 1:16
• Dimensions: (L/W/H): 310x140x80mm)
• Weight (without battery): 560gr
• Wheelbase: 175mm
• Ground clearance: approx. 6mm
• Track width: 110mm front / 115mm rear
• Wheels front/rear: Ø 50mm / Width: 18mm
• Damper filled: Yes (100CPS)
• Damper installation length: 38mm
• Motor ratio: pinion 16Z / main gear 40Z / module 0.6 (2.3mm motor shaft!)

INCLUDED:

• 1:16 Touring Car RTR
• 2.4GHz remote control
• 1500mAh LiPo battery
• 800mAh LiPo fast charger
• Sticker sheet
• Manual

      
REQUIRED ACCESSORIES:

• 2* AA batteries for remote control

MONSTER TRUCK ASSASSIN van ABSIMA

De nieuwe MONSTER TRUCK ASSASSIN van ABSIMA, is een 4X4 auto in schaal 1/8 geïnspireerd op competitie chassis om Auto R / C te oefenen met zijn verwoestende look!
Het ontwerp met zijn aluminium chassis van de nieuwste generatie en zijn betrouwbare mechanica zorgen ervoor dat u vele rijsessies zult hebben. De 4×4 voortstuwing is volledig gemonteerd op kogellagers met drie differentiëlen, waarna het loopwerk met variabele geometrie is ontworpen om grote verplaatsingen te bieden die gepaard gaan met hydraulische schokdempers met een groot volume. De hoge bodemvrijheid in combinatie met grote banden stelt u in staat om de vele obstakels die u onderweg zult tegenkomen te overwinnen.
De geometrie is gebaseerd op een specifieke dubbele draagarm geassocieerd met hydraulische schokdempers die verstelbaar zijn door een eenvoudig wiel om te spelen op de bodemvrijheid van de auto. De hele ASSASSIN wordt geleverd in een RTR-versie, d.w.z. klaar om te rijden met een 2,2 GHz 4-weg CRSV2-radio met een stuurwiel voor besturing en vervolgens een trigger voor acceleratie en remmen. Aan de motorkant heb je de keuze:

Optie 1 De " 4s » : Of u kiest voor een aangedreven motor in " 4s » te bereiken 70Km/h
Optie 2 op « 6s » : Ofwel een versterkte versie aangedreven door " 6s " voor nog krachtiger, bij de grens van de redelijkheid.

Nu is het aan jou : MOORDENAAR 4S of MOORDENAAR 6s

BELANGRIJKSTE TECHNISCHE KENMERKEN EN INNOVATIES:

HET CHASSIS

Het chassis wordt gemonteerd en origineel afgesteld geleverd. Deze is volledig verstelbaar als wedstrijdchassis met instelbare rijhoogte, instelbare schokdempers, verstelbare camber, knijp- en openingshoek, meerdere schokmontageposities en ook een verstelbare achterspoiler. Aluminium onderdelen worden behandeld en geanodiseerd, zoals de chassisplaat die lasergegraveerd is met een dikte van 3 mm. Er zijn ook geanodiseerde gouden kleuren, wishbone-steunen, wielnaven, versterking en schokdemperonderdelen, dit alles garandeert een lange levensduur van het chassis en een high-end ontwerp.

DE MOTORISERING VAN DE AUTO

De motorisering met in de eerste plaats, de elektronische variator wordt aangedreven door het merk Hobbywing, dat de beste in zijn categorie is in termen van prestaties en betrouwbaarheid, om tot een snelheid van 70 km / h te komen! De koelventilator op deze 120A-aandrijving zorgt voor regeling bij een constante temperatuur tijdens de werking van de ASSASSIN 4S, zelfs bij vol gas. De 2300KV-motor levert waanzinnig vermogen aan de wielen. De volledig aluminium motorsteun is ook gemakkelijk verstelbaar en verwijderbaar.

Op de elektronische aandrijving zijn desgewenst ook veel instellingen beschikbaar, zoals: remkracht, mechanische remretour naar neutraal, punchmodus, bedrijfsmodus en afschakelspanning van uw LiPo-batterijen. U kunt de instellingen wijzigen via een aanpassingsknop of een programmeervak (afzonderlijk verkrijgbaar). T-plug connectoren zorgen voor een betrouwbare verbinding tussen uw speedo en de gekozen accu's. We raden aan om kwaliteitsbatterijen te gebruiken met een hoge capaciteit en een ontladingssnelheid van ten minste 45C. De 4WD-transmissie wordt geleverd door CVD-type CVD CVD-gimbals aan de voor- en achterkant, terwijl er in het midden gimbals zijn met gepinde ballen.
 

HET RADIOSYSTEEM

Ons radiosysteem is de ABSIMA "CR2SV2" in 2,4 GHz frequentie, bewezen en betrouwbaar in het garanderen van snelle communicatie met uw voertuig voor nauwkeurig rijden. De stuurservo is uitgerust met metalen tandwielen met een vermogen van 9 kg, allemaal gecombineerd met hoogwaardige banden om een goede besturing op alle oppervlakken te garanderen.

HOOGTEPUNTEN VAN DEZE KIT:

-De volledig geassembleerde auto klaar voor gebruik
-4WD (4WD) met 4 verstelbare hydraulische schokdempers -Mooie gelakte en versierde carrosserie -Krachtige borstelloze motorisering van 2300Kv
-Transmissie en waterdichte elektronica -Eenvoudig onderhoud met gemeenschappelijke onderdelen op Avt en Arr
loopwerk -Opties en reserveonderdelen beschikbaar



-Een ontwerp rechtstreeks van de concurrentie

DEZE KIT BEVAT

De volledig geassembleerde auto

De CR2SV2 ABSIMA afstandsbediening met 2.4GHZ stuurwiel

Elektronica gemonteerd en geparametriseerd

De zeer gedetailleerde instructies met lijst van reserveonderdelen voor service en onderhoud

STARTER KITS NIET INBEGREPEN:

4 batterijen voor afstandsbediening (AA)

Een batterijbeschermingstas (we raden referentie 9000008)

Een programmeervak (referentievak 2110041)

LIPO batterijen (Wij raden batterijen referentie 4140009 - LiPo Stick Pack 7.4V-45C 5000 Hardcase T-plug)

Eén oplader (we raden de APC-1-lader ref 4000013)

SPECIFICATIES

-Auto MONSTER TRUCK 1/8 Elektrische Borstelloos voor oefening in off-road en op de weg
-Elektromotor Borstelloos 2300KV 4 polen / 650W / Motor as van 5mm, -Elektronische variator 120A Hobbywing elektronisch programmeerbaar met (rem, neutrale positie, verschillende rijmodi,
automatische laagspanningssnede) / compatibele Lipo batterij 7.4V / gelijkstroom 50A en Peak 300A / Bec 6V-3A / connectoren type Dean T.
-9kg stuurmotor met stalen tandwielen -Aluminium motorsteun met glijbanen
-Transmissie volledig op kogellagers en beschermende
behuizingen -Carbals type CVD diameter mm behandeld staal
(voor en achter)
-Drie differentiëlen voor, centraal en achter Centrale kunststof kroon van 49 tanden in Module 1 -Body met polycarbonaat cabine, geverfd en gedecoreerd

-Dubbele steunvin in flexibele kunststof Grote beschermende
voorbumper -Grootvolume hydraulische schokdempers diameter 16mm met veervoorspaningswiel -Multi-positie
voor en achter aluminium schokdemperbeugels -Pinch en camber verstelbaar door omgekeerde
steekstangen -Batterijconnectoren type "Dean T"
-Standaard naven in 17mm
-
Multi-pimple pneumatisch zacht rubber
-Snelheid van meer dan 70 km/u!

1:10 EP Monster Truck ""AMT3.4-V2 BL"" 4WD Brushless RTR ABSIMA

The success story continues! We have equipped the AMT3.4 "V2" with some new features that bring the vehicle to the next level of evolution.
      
 
Some technical changes have been implemented in our 1/10th scale Monster Truck - among other things, the vehicle now comes with LED lighting on the roof.
 

• NEW* 60A brushless speed controller with T connector and 3421KV motor
• NEW* Programmable speed controller
• NEW* 15 kg steering servo with metal gear
• NEW* LED lighting
• NEW* Monster Truck body with many add-on parts
• NEW* even more option parts available

 

 
 
 
 
The new 60A brushless speed controller is waterproof, programmable and pre-configured with a T-connector. To fully exploit the potential of the vehicle, we recommend a LiPo 2S/7.4V battery for operation. In addition, a separately available programming box (item 2110062) can be used to adjust various parameters such as braking force, punch, low-voltage protection and more.
 
 
The car is powered by a 3421KV brushless motor that directly accesses the all-wheel drive. The two differentials (front and rear) are driven by an aluminium drive shaft. A 15kg metal gear servo handles the conversion of the steering commands. 
The motor/controller unit can also be powered by a 3S/11.1V LiPo battery (note the size of the battery compartment!), but this increases the wear and tear on the vehicle extremely. Also the handling becomes almost impossible due to the enormous over-motorization. Therefore, we generally advise against 3S driving.

4 adjustable aluminum oil-pressure shock absorbers offer ideal handling, so that a lot of driving fun. The spring preload can be adjusted via a knurled screw. Thus, the chassis can be perfectly adapted to your needs.
 
      
Lightweight and compact design, as well as comfortable and ergonomically shaped - these are just two features of our CR4S 4-channel remote control. Of course, all trim, reverse and dual rate functions are available in the cockpit, making adjustments easy via levers and knobs. In addition, the remote control has a "Beginner Mode" (speed reduction by 50%) and is therefore ideal for pilots who do not yet have so much experience with the handling of such RC vehicles.
 
      

• 4WD all wheel drive
• 2.4GHz 4-channel radio system
• 60A brushless speed controller (waterproof; T plug; programmable)
• 3421KV brushless motor (sensorless; splash-proof)
• 15kg metal gear steering servo (25T; ball bearings) 
• 8 Aluminium oil shock absorbers
• Ball bearing main drive
• Extremely durable composite plastic parts
• Steel differential outdrives
• Aluminium main drive shaft with steel mounts
• Adjustable upper tie rods
• 5mm aluminium engine mount
• 6mm shock towers
• 2 differentials (front/rear)
• Stylish Monster Truck body with add-on parts
• "Light-Weight" chassis (less weight - longer driving time)
• Many aluminum option parts available

 

• Scale: 1:10
• Dimensions (L/W/H): 425x300x200 mm
• Weight: 2090g
• Wheelbase: 270mm
• Ground clearance: approx. 45mm
• Track width: 250mm front/rear
• Wheels front/rear: Ø 116mm / Width: 57mm
• Shock absorber oil: 400CPS
• Shock absorber installation length: 100mm
• Motor ratio: 17T / main gear: 64T (module 0.6)  

 
 

• 1/10 Brushless Monster Truck "AMT3.4BLV2" RTR
• 2.4GHz CR4S radio
• Sticker sheet
• Manual

 

• 4 AA batteries for radio
• 7.4V/2S LiPo car battery
• Charger  (suitable for car battery)
• Programming box for individual settings of the speed controller

 
 
 
 

1:10 EP Truggy "AT3.4-V2" 4WD RTR ABSIMA

1:16 EP BL Touring Car "FUN MAKER" neon genesis RTR ABSIMA

Our 1/16 touring car combines precision and performance in a compact and affordable model that can be taken anywhere and be ready for fun in no time!
This little powerhouse comes ready-to-run with (almost) everything you need to hit the track (only 2* AA batteries for the transmitter are needed). Whether you're racing with your friends in your backyard driveway, on the playground, in the office, or doing wild drifts in your living room, this little "fun maker" leaves nothing to be desired!
 
The chassis, with its powerful engine, all-wheel drive and independent suspension are just a few features that deliver impressive performance. In addition, the aluminum parts such as chassis plate, shock towers and shock absorbers which contribute to excellent rigidity and thus to the ultimate driving experience on smooth surfaces. This high-tech chassis keeps the center of gravity as low as possible to ensure a precise and responsive driving experience.
 
Short and sweet: This little powerhouse lies on the road like a board !
 
HIGHLIGHTS:

• Aluminum chassis for excellent handling characteristics
• Powered by a powerful 380 brushless motor
• High performance differentials on front and rear axle
• Independent suspension for exceptional handling
• Intricately designed, multi-piece bodyshell
• Speed: +/- 40 km/h

DESIGN:
 
The body with its aggressive design and very detailed shape is made of sturdy material to withstand impacts. It comes with a decal sheet including gluing instructions. Of course, you can also customize your sweetie or get an unpainted body (optional available - item 1610090) for a completely custom look. In addition, the engine dummy for the hood and of course the lighting front and rear complement the design.
     
     
 
CHASSIS PERFORMANCE:
 
Bling Bling! Already noble the design with the aluminum parts! Good looking, good performance!
Basically, the structure and arrangement of the components is like a 1:10 competition touring car:

• Independent suspension
• CVD front driveshafts
• Differentials with aluminum pinion gears (38Z) and pinion gears (14Z)
• Differential gears made of polyamide (12Z/24Z)
• Aluminum drive bones on rear axle
• Aluminum "big-bore" shock absorbers

Chassis, shock towers and upper deck made of aluminum not only give excellent stiffness. Due to the extra weight in contrast to carbon (which is used in high-quality 1:10 on-road chassis), the grip is increased here and thus the performance is increased. If that's not enough, you can treat yourself to fancy aluminum wheels (available as an option - item 1610092/1610093).
     
         
 
DRIVE UNIT:
 
a plenty of power for that scale!
Driven by a 380 brushless motor with 3300KV and a 30A receiver / speed controller unit with T-high current plug, one is already fast on the road and the insane torque provides for decent drifts! The motor is driven by a 16Z aluminum motor pinion (Mod.0.6 / 2.3mm motor shaft) and a 40Z main gear. If you ever want to change the gear ratio, please remember that the motor shaft has a diameter of 2.3mm. Accordingly, you must pay attention to this when buying the motor pinion. The firing is done by a 1500mAh 7.4V/2S LiPo battery. There is also a matching 20W/800mAh LiPo fast charger included
 
 
 

 
REMOTE CONTROL & STEERING:
 
A 2.4GHz remote control system is of course standard today! With our radio you also have the possibility to throttle the speed via a rotary control, if someone wants to take the control who is not yet so skilled. The steering takes over a fast steering servo with an actuating force of 2.2kg. This means that nothing stands in the way of the first drift attempts on smooth surfaces such as tiles or wooden floors.The optimal fun mobile for any smooth surface! 
      
 
FEATURES:

• 4WD All Wheel Drive
• 2.4GHz remote control
• Full ball bearing drive
• Aluminum chassis, upper deck and shock towers
• Aluminum "big bore" shock absorbers
• CVD axles on front axle
• Heavy duty front & rear differentials
• Aluminum propshaft
• LED lighting front & rear
• Extremely detailed body with sticker sheet

SPECIFICATION:

• Scale: 1:16
• Dimensions: (L/W/H): 310x140x80mm)
• Weight (without battery): 560gr
• Wheelbase: 175mm
• Ground clearance: approx. 6mm
• Track width: 110mm front / 115mm rear
• Wheels front/rear: Ø 50mm / Width: 18mm
• Damper filled: Yes (100CPS)
• Damper installation length: 38mm
• Motor ratio: pinion 16Z / main gear 40Z / module 0.6 (2.3mm motor shaft!)

INCLUDED:

• 1:16 Touring Car RTR
• 2.4GHz remote control
• 1500mAh LiPo battery
• 800mAh LiPo fast charger
• Sticker sheet
• Manual

      
REQUIRED ACCESSORIES:

• 2* AA batteries for remote control

10 EP Buggy "AB3.4-V2" 4WD RTR absima

• NEW* 80A brushed speed controller withT-connector and 540 motor
• NEW* Programmable speed controller
• NEW* 6kg steering servo
• NEW* LED lighting
• NEW* Downforce rear wing
• NEW* even more option parts available

46703 1/10 X-SA Hornet

1/10 X-SA Hornet

Kits are a big part of what we do here at Tamiya, but we also understand that some people may not have the time or confidence for the
assembly of an R/C model – that is why we have come up with the X-SA series of models. Each product features a fully-assembled and setup
chassis with TEU-105BK ESC included, plus a fully painted body with the marking stickers already applied. All you need to do is provide the R/C equipment and battery pack, and you’re ready to
drive.

Another true Tamiya classic joins the new X-SA series in the form of the Hornet, a childhood dream for many early R/C fans and still a highly popular model in the modern day.

About the Model:
- This is a 1/10 scale finished R/C model. Length: 400mm, width: 230mm, height: 150mm. Wheelbase: 251mm.
- Finished polycarbonate body and wing are pre-painted in black, and have the iconic Hornet livery stickers applied.
- The chassis comes ready-assembled.• Independent swing axle front suspension utilizes friction dampers, while rolling rigid axle rear suspension is fitted with oil filled dampers.
- Sealed rear gearbox protects diff gear during off-road running.
- Requires separately sold R/C equipment, battery pack and charger
- Motor type 540
- ESC TEU-105BK

Required accessories:
2-channel remote control with steering servo, battery pack, charger for drive battery, transmitter batteries

Tamiya nummer: 46703

EAN: 4950344467037

58711 709030 1:10 RC McLaren Senna TT-02 incl. Brushless Set

Set 1:10 RC McLaren Senna TT-02 58711 & Brushless Set 709030

Tamiya nummer: T58711-SET
EAN nummer: 0086544916342

Om de instap naar de Tamiya Cup te vereenvoudigen hebben we speciaal deze combo samengesteld.
We hebben extra voor dit combopakket gekozen voor het populaire Tamiya TT-02 chassis met een McLaren Senna kap.
De brusshless (borsteloos) set in deze combo is de Dragster 2500KV van RHI. De regelaar is waterdicht en zo kan er ook in natte omstandigheden geraced worden.

Wat heb je nog nodig om deze raceauto te kunnen rijden:
- Zenderset
- Stuurservo
- Rijaccu
- Lader voor de rijaccu en voor de zenderaccu´s
- PS-Verf voor de kap

Over het model:
- Dit is een 1/10 schaal R/C modelbouwpakket.
- Lengte: 466mm, hoogte: 118mm. Wielbasis: 257mm.
- De complexe, aerodynamisch aangescherpte vorm van de McLaren Senna is in stijl nagemaakt door een polycarbonaat body met speciale zwarte ABS zijspiegels en achtervleugel.
- Gebaseerd op het as-aangedreven 4WD TT-02 chassis dat een hoge aanpasbaarheid biedt met verschillende soorten setups.
- Voorzien van de Urethane Bumper L (TT-01/TGS) (Item 51226) die uw model helpt beschermen.
- 10-spaaks wielen in Gun Metal met radiaalbanden (item 50419).
- De carrosserie moet nog worden uitgeknipt, onderdelen bevestigen (Spiegels etc.), spuiten en het aanbrengen van stickers.
- Gebruik: on-road
- Aandrijfsysteem: tandwieloverbrenging
- Aandrijflijn: as
- Differentieel type: tandwiel
- Ophanging: onafhankelijk opgehangen
- Stuurmechanisme: stuurhevel
- Schokdemper: frictie demper
- Materiaal schokdemper: kunststof
- Type band: rubber
- Type profiel: slick
- Body materiaal: polycarbonaat (lexaan) lichte uitvoering
- Materiaal chassis: kunststof
- Elektronische snelheidsregelaar (ESC): inbegrepen
- ESC type: Brushless Set RHI
- Ledvoorbereid: ja
- Ledverlichting: nee
- Motor: 540 brushles 2500KV
- Lagers: kunststof glijlagers
- Instelbaar camber: vast
- Instelbaar toe-in: alleen voor
- Instelbare grondspeling: ja
- Instelbare overbrengingsverhouding: ja
- Instelbare wielbasis: ja
- Instelbare breedte: ja
- Instelbare schokdemperpositie: ja

Over de brushless set:
Regelaar:
- Accutype: 2S en NiMH (6 cellen) ON-Road en OFF-Road, 3S en NiMH (9 cellen) Off en ON-Road.
- Continue stroom: 60A
- Piekstroom: 360A
- BEC-uitgang: 2A/5V
- Weerstand: 0,0007 Ohm
- Afmetingen: 51x36x36mm
- Gewicht: 80g

Motor:
- Motortype: Sensorloos
- KV (RPM/Volt): 2500KV
- Watt: max. 756W
- Max. Spanning: tot 12V
- Max. Stroomsterkte: 66A
- Min. stroom 3,2A
- Polen: 4
- Aansluiting: 4mm goud
- Diameter motoras: 3.175mm
- Lengte motoras: 15mm
- Afmetingen: 35,8x50mm
- Gewicht: 148g

Programmeren van de regelaar kan o.a. via de programmeerkaart. Artikelnummer: C906303

Leveromvang:
- Bouwdoos TT-02 met McLaren Senna kap en een brushless-set

ABSIMA 1:10 EP Monster Truck "AMT3.4-V2" 4WD RTR

• NEW* 80A brushed speed controller withT-connector and 540 motor
• NEW* Programmable speed controller
• NEW* 15kg steering servo with metal gears
• NEW* LED lighting
• NEW* Monster truck body with many add-on parts
• NEW* even more option parts available

 
 
 
 
The new 80A Brushed speed controller is waterproof, programmable and pre-configured with a T-connector. To fully exploit the potential of the vehicle, we recommend a 2S LiPo battery for operation. In addition, a separately available programming card (item 2110061) can be used to set various parameters such as braking force, punch, low voltage protection and more.
 
      

The car is powered by a 550size 18T brushed motor that directly accesses the all-wheel drive system. The two differentials (front and rear) are driven by an aluminum driveshaft. Due to the higher power of the speed controller and the use of T-connectors, any 2S LiPo battery can be used - no matter what the C-rate and capacity.
 
8(!) oil-pressure shock absorbers provide ideal handling, so there is plenty of driving fun. A 15kg metal gear servo with takes over the implementation of the steering commands.
 
      
 
Lightweight and compact design, as well as comfortable and ergonomically shaped - these are just two features of our CR4S 4-channel remote control. Of course, all trim, reverse and dual rate functions are available in the cockpit, making adjustments easy via levers and knobs. In addition, the remote control has a "Beginner Mode" (speed reduction by 50%) and is therefore ideal for pilots who do not yet have so much experience with the handling of such RC vehicles.
 
      

• 4WD all wheel drive
• 2.4 GHz 4-channel radio system
• 80A brushed speed controller with T-plug
• 550size 18T motor with 28.000RPM @ 7.4V
• 15kg MG steering servo (25T, ball bearings)
• 8 Oil shock absorbers
• Ball bearing main drive
• Extremely durable composite plastic parts
• Steel differential outputs
• Aluminum main drive shaft with steel mounts
• Adjustable upper tie rods
• 5mm aluminum motor mount
• 6mm shock towers
• 2 differentials (front/rear)
• Stylish truggy body with add-on parts
• "Light-Weight" chassis (less weight - longer drive time)
• Many aluminum option parts available

 

• Scale: 1:10
• Dimensions (L/W/H): 425x300x200 mm
• Weight: 2070g
• Wheelbase: 270mm
• Ground clearance: ca. 45mm
• Track width: 250mm front/rear
• Wheels front/rear: Ø 116mm / Width: 57mm
• Shock absorber oil: 400CPS
• Shock absorber installation length: 100mm
• Motor ratio: pinion: 17T / main gear: 64T (module 0,6) 

 
 

• 1/10 Monster Truck "AMT3.4V2" RTR
• 2.4GHz "CR4S" radio
• Sticker sheet

ABSIMA 1:10 EP Monster Truck "AMT3.4" 4WD - 12224

Fast and powerful, the new Hotshot 3.4 series is equipped with a powerful brushed electric motor, with heat sink, and waterproof electronic speed controller (ESC). Ready to run out of the box (EU & UK version only). Shaft driven 4WD provides you with the necessary traction to maneuver the toughest obstacles and the forward/reverse ESC is beneficial in navigating tight spots. Lightweight plastic chassis, four oil filled adjustable coil over shocks, and independent suspension offer rock solid performance. Fear not! A 2.4GHz radio system and waterproof electronics ensure control, for those who dare to unleash the power.

HIGHLIGHTS

• 40A Brushed Waterproof Speed Controller
• Powerfull 18T 550 Motor
• 2.4GHz Radio System

     
PRODUCT FEATURES

• Waterproof 40A brushed ESC
• Select between NiMH and LiPo battery
• Ball bearing transmission
• 8 pcs. Oil filled adjustable shocks
• Gear differential front/rear
• Aluminum motor mount
• Complete covered transmission
• Adjustable turnbuckles & wishbones
• Motor heat sink
• Aero disc racing wheels
• Full printed body
• 2.4GHz radio System 
• Sticker sheet for a unique design
• Performance hop ups available!

     
TECH SPECS

• Motor Type: 18T 550 Brushed Motor
• Transmission: Forward, Brake & Reverse
• Drive System: 4 Wheel Drive
• Wheelbase: 270mm
• Ground Clearance: 55mm
• Measure (L/W/H): 425x300x200 mm
• Weight: 1850g
• Tire width: 57 mm front / 57 mm rear
• Tire Ø ± 116 mm
• Shock spring force: medium / Length: 95mm f/r
• Shock oil viscosity: 400 f/r
• Motor transmission: Pinion 17T / Gear 64T
• Pinion module: 0.6

          
MORE FEATURES:

• Speed Controller (2100002): NiMH (7.2V) & LiPo (7.4V/2S) suitable / Amps: 40A / BEC 5V/2A / Drive function: forwards/brake/reverse / Plug system: Tamiya
• Servo (2030003): 4kg steering force / 25T outdrive
• Motor (1230361): 18T / 28.000RPM / 12A / Size: 550
• Radio (2000001): 2-channel radio / 3-channel receiver / reverse / dual rate / trimming

 
SCOPE OF DELIVERY

• Monster Truck "AMT3.4" RTR - brushed version
• 2.4GHz Radio System
• Manual
• Sticker Sheet

 
REQUIRED ACCESSORIES

• Battery - Racing Pack NiMH or LiPo (up to 30C)
• Charger
• 4x AA Mignon Batteries for Radio

ABSIMA 1:10 EP Truggy "AT3.4BL" 4WD Brushless

HIGHLIGHTS:

• Water-resistant 50A BL Speed Controler (programmable)
• Powerfull 3300KV BL Motor
• 2.4GHz A.F.H.D.S. Radio System
• Full Aluminum Shocks
• Steel Motor Transmission

GENERAL CHASSIS FEATURES:

• 4WD
• Complete ball bearing 
• Adjustable aluminum oil shocks
• Gear differential front/rear
• Aluminum motor mount
• Complete covered transmission
• New chassis layout for better performance
• Adjustable turnbuckles
• Adjustable wishbones
• Aero disc racing wheels
• Full printed body
• Sticker sheet for a unique design
• A lot tune-up parts available!

   
TECHNICAL SPECIFICATION:

• Measure (L/W/H): 405x325x165 mm
• Weight: 1550g
• Wheelbase: 270 mm
• Chassis clearance: 40 mm
• Tire width: 55 mm front / 55 mm rear
• Tire Ø ± 105 mm
• Shock spring force: medium / Length: 85mm f/r
• Differential oil viscosity: 1.000 front / 3.000 rear
• Shock oil viscosity: 400 f/r
• Steel Motor transmission: Pinion 23T / Gear 64T
• Pinion module: 0.6

   
MORE FEATURES:

• BL Speed Controller (2110007): programmable (brake power, neutral brake, drive mode, punch, V cut-off) / NiMH (7.2V) & LiPo (7.4V/2S) suitable / Amps: 50A cont./300A peak / BEC 6V/3A / Overheat cut-off / Drive function: front/reverse/brake (standard) / Plug system: T-plug (Deans style)
• Servo (2030003): 4kg steering force / 25T outdrive 
• Motor (2130005): 3300KV / 27.400RPM @ 7.4V / Operating voltage: 4.8 - 11.1V / Size: 540 
• Radio (2000001): 2-channel radio / 3-channel receiver / reverse / dual rate / trimming

         
SCOPE OF DELIVERY:

• Truggy "AT3.4BL" RTR - brushless version
• 2.4GHz Radio System
• Manual
• Sticker Sheet

REQUIRED ACCESSORIES:

• Battery - Racing Pack NiMH or LiPo (recommended)
• Charger

ABSIMA 1:24 2WD Racing Buggy "X Racer" RTR with ESP

HIGHLIGHTS:
 
- RTR version with battery, charger and remote control
- Speed +20 km/h
- Full digital proportional control
- Electronic Stability Program (ESP)

Made of super elastic plastic to absorb shocks well, high-grip off-road wheels and equipped with the finest technology, the vehicle leaves nothing to be desired. The "8520" coreless motor accelerates the RC car up to 20km/h. If this is too fast for you in the living room or children's room, you can also reduce the speed thanks to a rotary control nub.
 
Throttle/brake and steering commands are sensitively implemented in full proportion by the 2.4GHz remote control. Due to the modern transmission system, several vehicles can of course be driven at the same time. So nothing stands in the way of the mini Grand Prix at home! 
 
The HIGHLIGHT is probably the built-in "ELECTRONIC STABILITY PROGRAM" (ESP) which keeps the rear-driven vehicle always well on track even on smooth surfaces such as laminate or tiled floors. Thanks to a built-in "gyro" as you also know from drones, the vehicle detect unnatural movements of the rear and steers automatically against it to prevent a breakaway (to a certain extent). However, if you still want to make wild drifts, you simply have to push the technology to its limits with your own driving skills, which is a lot of fun!
 
FEATURES:
 
- 2WD rear wheel drive
- 2.4GHz remote control
- Fully proportional control
- Maximum speed can be limited on the remote control
- Removable battery
 
SPECIFICATION:
 
- Servo: 3.7g Servo
- Motor: 8520 Coreless Motor
- Battery: 3.7V 300mAh LiPo Battery
- Speed throttleable: Yes
- ESP built in: Yes
- Charging time: approx. 30-40 minutes
- Driving time: approx. 20 minutes
- Dimensions (L/W/H): 155x95x65 mm
- Weight: 110 g 
INCLUDED:
 
- 1:24 X-Racer Buggy RTR
- 2.4GHz gRemote Control
- 300mAh LiPo Battery
- USB Charger
- Manual
 
REQUIRED ACCESSORIES:
 
- 2 AA Batteries for Remote Control


Our small 1:24 scale X-Racers are the absolutely ideal introduction to the RC hobby for young and old and will turn any office or living room into a race track!

ABSIMA 1:24 2WD Touring/Drift Car "X Racer" RTR with ESP

HIGHLIGHTS:
 
- RTR version with battery, charger and remote control
- Speed +20 km/h
- Full digital proportional control
- Electronic Stability Program (ESP)
 
Our small 1:24 scale X-Racers are the absolutely ideal introduction to the RC hobby for young and old and will turn any office or living room into a race track!
     
Made of super elastic plastic to absorb shocks well, high-grip off-road wheels and equipped with the finest technology, the vehicle leaves nothing to be desired. The "8520" coreless motor accelerates the RC car up to 20km/h. If this is too fast for you in the living room or children's room, you can also reduce the speed thanks to a rotary control nub.
 
Throttle/brake and steering commands are sensitively implemented in full proportion by the 2.4GHz remote control. Due to the modern transmission system, several vehicles can of course be driven at the same time. So nothing stands in the way of the mini Grand Prix at home! 
 
The HIGHLIGHT is probably the built-in "ELECTRONIC STABILITY PROGRAM" (ESP) which keeps the rear-driven vehicle always well on track even on smooth surfaces such as laminate or tiled floors. Thanks to a built-in "gyro" as you also know from drones, the vehicle detect unnatural movements of the rear and steers automatically against it to prevent a breakaway (to a certain extent). However, if you still want to make wild drifts, you simply have to push the technology to its limits with your own driving skills, which is a lot of fun! On Top of that we add a set of drift wheels for carpet.
 
      
 
The removable 3.7V 300mAh LiPo battery is charged by a USB charger. The charging time is about 30-40 minutes and the driving time is about 20 minutes. Additional batteries are available for even more driving fun.
 
FEATURES:
 
- 2WD rear wheel drive
- 2.4GHz remote control
- Fully proportional control
- Maximum speed can be limited on the remote control
- Removable battery
 
SPECIFICATION:
 
- Servo: 3.7g Servo
- Motor: 8520 Coreless Motor
- Battery: 3.7V 300mAh LiPo Battery
- Speed throttleable: Yes
- ESP built in: Yes
- Charging time: approx. 30-40 minutes
- Driving time: approx. 20 minutes
- Dimensions (L/W/H): 185x85x70 mm
- Weight: 110 g 
 
INCLUDED:
 
- 1:24 X-Racer Touring Car RTR
- 2.4GHz Remote Control
- 300mAh LiPo Battery
- USB Charger
- 1 Set Drift Wheels
- Manual
 
REQUIRED ACCESSORIES:
 
- 2* AA Batteries for Remote Control

Absima 1:8 Buggy "stoke Gen2.0" 4s Rtr - 13100

Absima 1:8 Buggy "stoke Gen2.0" 4s Rtr

Absima 1:8 Truggy "torch Gen2.0" 6s Rtr - 13121

Absima 1:8 Truggy "torch Gen2.0" 6s Rtr

ABSIMA BOOSTER ADB 1.4 DESERT BUGGY

• 4WD all-wheel drive
• 2.4GHz remote control
• Extremely durable composite plastic parts
• Fully adjustable suspension
• Ball bearing drive
• Adjustable 16mm aluminum big bore shocks
• Steel differential outputs   
• Aluminum chassis plate
• Adjustable upper suspension arms
• 5mm aluminum motor mount
• 5mm aluminum shock towers
• Aluminum driveshaft
• 2 CNC cone differentials (front/rear)
• LED light bar front and rear
• Extremely detailed body with add-on parts
• Vehicle should be powered by 2-cell (2S) LiPo battery pack
•  
• Scale: 1:10
• Dimensions (L/W/H): 515x320x170 mm
• Weight: 2550g
• Wheelbase: 290mm
• Ground clearance: approx. 50mm
• Track width: 245mm front / 240mm rear
• Wheels front/rear Ø: 128mm / Width: 55mm
• Damper oil: 400CPS
• Damper installation length: 80mm
• Motor ratio brushless version: Pinion: 21T / Main gear: 77T (48dp)
• Dessert Buggy "ADB1.4" Brushless Version
• 2.4GHz Remote Control CR2SV2
• Mini tool kit
• Instruction manual

ABSIMA CRAWLER CR2.4 RTR 1:10 EP

Technische specificaties:

• LONTEN "CR-2.4 RTR".
• 40A geborstelde waterdichte cruise control met rupsmodus
• 4-link ophangsysteem met geanodiseerde aluminium ophangingsschakels voor soepel kruipen
• UJ telescopisch aandrijfsysteem voor maximale duurzaamheid
• Op het chassis gemonteerde digitale stuurservo
• Waterdichte cruise control 40A
• Massieve kogellagers
• Centrale versnellingsbak met 3 versnellingen in het midden
• Lage zwaartepunt motor mount

Bijzonderheden:

• Geschikte NiMH (7.2V) & LiPo (7.4V/2S) cruise control / Ampère: 40A / BEC 5V/2A / Aandrijffunctie: voor/achter (motorrem) / Aansluitsysteem: Tamiya
• Digitale servo 3kg stuurkracht / 25T overdrive
• Motor 22T maat 390
• 2-kanaals radio / 3-kanaals ontvanger / omgekeerd / dubbele frequentie
• Wielbasis: 280 mm
• Chassisspeling: Chassis 79 mm / As 38 mm
• Bandenbreedte: 40 mm voor/achter
• Ø banden ± 118 mm
• Demperveersterkte: zacht / Lengte: 78mm d/r
• Demperolie: 100 p/r
• Motor transmissie - 22T rondsel / 60T versnelling
• Tandwielmodule: 48dp
• Afmetingen (L/B/h): 500x225x240 mm
• Gewicht: 1560g

Elementen in de benzinerupsbox:

• Crawler "CR2.4" RTR
• Extra carrosserie van de JEEP
• 2,4 GHz radiosysteem
• Gebruikershandleiding

Vereiste elementen voor de CR2.4 Crawler:

• NiMH of LiPo batterij
• Compatibele oplader

 

Specificaties

Type voortstuwing	Elektrisch
Schub	1/10
Type transmissie	4 WD
Kit / Gemonteerd	Gemonteerd
Radio	Ja
Frequentie	2,4 GHz
Elektrische motorisering	Borstelloze
Motor	Motor 22T maat 390
Batterij	NiMH (7,2 V) & LiPo (7,4 V/2 BS)
Type batterij- en controllerstekker	Tamiya
Lengte	500 (mm)
Breedte	225 (mm)
Hoogte	240 (mm)
Wielbasis	280 (mm)
Gewicht	1560 (g)

ABSIMA Scale 1:16 4WD High Speed Sand Buggy 2,4GHz Black/Red - 16005

• Water-resistant Electronic
• Incl. Car Battery and USB Charging Cable 
• Incl. LED Headlights 

GENERAL CHASSIS FEATURES:

• 1/16th Scale
• 4WD
• Complete Ball Bearing
• 1.8kg Steering Servo
• Front & Rear Differentials
• Differential gears and motor pinion made from metal
• Shocks with Aluminum Caps
• High Performance Motor and Speed Controller
• CVD Drive Shafts 
• Range aprox. 60m
• Drive Time: aprox. 12 Minutes
• Aluminum Cardan Shafts 
• Adjustable Speed on the Radio
• Overheat Protection 
• Incl. LED Headlights
• Incl. 2.4 GHz Radio System
• Full printed Body
• Overcharge & Over-discharge Protection 
• 500mAh Li-Ion Car Battery

TECHNICAL SPECIFICATION:

• Measure: (L/W/H): 270 x 235 x 130 mm
• Weight : 730g
• Wheelbase: 175 mm
• Chassis Clearance: 45 mm
• Track Width: 190 mm front/rear
• Wheel Design: Monster Rubber / 5 Double Spoke Rims
• Tire Width: 45 mm
• Reifen Ø: ± 80 mm
• Shock Oil Viscosity : n.a.
• Shock Spring Force: Medium
• Shock Instalation Length: 65 mm front/rear

SCOPE OF DELIVERY: 

• 1/16th RC Car 
• 2.4 GHz Radio System 
• Car Battery
• USB Charging Cable
• LED Headligths
• Manual

REQUIRED ACCESSORIES:

• 3 AA Cells for Radio

Carson 1/18 Micro Beast 2.4G 100% RTR - 404163

Fast and powerful, the new Hotshot 3.4 series is equipped with a powerful brushed electric motor, with heat sink, and waterproof electronic speed controller (ESC). Ready to run out of the box (EU & UK version including plug charger and battery). Shaft driven 4WD provides you with the necessary traction to maneuver the toughest obstacles and the forward/reverse ESC is beneficial in navigating tight spots. Lightweight plastic chassis, four oil filled adjustable coil over shocks, and independent suspension offer rock solid performance. Fear not! A 2.4GHz radio system and waterproof electronics ensure control, for those who dare to unleash the power.

HIGHLIGHTS

• 40A Brushed Waterproof Speed Controller
• Powerfull 15T Motor with 32.000RPM
• 2.4GHz Radio System

 
   
PRODUCT FEATURES

• Waterproof 40A brushed ESC
• Select between NiMH and LiPo battery
• Ball bearing transmission
• Oil filled adjustable shocks
• Gear differential front/rear
• Aluminum motor mount
• Complete covered transmission
• Adjustable turnbuckles & wishbones
• Motor heat sink
• Aero disc racing wheels
• Full printed body
• 2.4GHz radio System 
• Sticker sheet for a unique design
• Performance hop ups available!

     
TECH SPECS

• Motor Type: 15T 540 Brushed Motor
• Transmission: Forward, Brake & Reverse
• Drive System: 4 Wheel Drive
• Wheelbase: 270mm
• Ground Clearance: 35mm
• Measure (L/W/H): 380x255x155 mm
• Weight: 1410g
• Tire width: 33 mm front / 42 mm rear
• Tire Ø ± 88 mm
• Shock spring force: medium / Length: 85mm f/r
• Differential oil viscosity: 3.000 front /1.000 rear
• Shock oil viscosity: 400 f/r
• Motor transmission: Pinion 23T / Gear 64T
• Pinion module: 0.6

     
MORE FEATURES:

• Speed Controller (2100002): NiMH (7.2V) & LiPo (7.4V/2S) suitable / Amps: 40A / BEC 5V/2A / Drive function: forwards/brake/reverse / Plug system: Tamiya
• Servo (2030003): 4kg steering force / 25T outdrive
• Motor (1230360): 15T / 32.000RPM / 16A / Size: 540
• Radio (2000001): 2-channel radio / 3-channel receiver / reverse / dual rate / trimming

 
SCOPE OF DELIVERY

• Buggy "AB3.4" RTR - brushed version
• 2.4GHz Radio System
• Manual
• Sticker Sheet

REQUIRED ACCESSORIES

• Battery - Racing Pack NiMH or LiPo (up to 30C)
• Charger
• 4x AA Mignon Batteries for Radio