There are no products in your shopping cart yet.
XRAY T4 2019 Options
Loading...
Hudy Alu Countersunk Shim - Orange (10), H296510-o - 296510-O
Hudy Alu Countersunk Shim - Orange (10), H296510-o
XRAY T4'19 ALU CHASSIS 2.0MM - SWISS 7075 T6 - 301149
T4’19 Alu Chassis
301149 T4'19 Alu Chassis 2.0mm - Swiss 7075 T6
• More predictable handling
• Fits front chassis brace
• For very-high traction tracks
• 2mm thickness
• Swiss 7075 T6 aluminum
• Black anodized
Redesigned aluminum chassis to accommodate the new front chassis brace. The front brace – which can be easily installed on the chassis with two screws – eliminates side flex at the front of the chassis, improving steering response and making the car more predictable.
Extensively tested and recommended for high- and very-high traction tracks, this narrow chassis is CNC-machined from 2mm premium Swiss 7075 T6 and additionally black coated.
XRAY T4'19 ALU FLEX CHASSIS 2.0MM - SWISS 7075 T6 - 301150
#301150 T4'19 Alu Flex Chassis 2.0mm - Swiss 7075 T6
• Special cutout openings
• Increased flex
• Easier to drive
• For medium-to-high traction tracks
• Fits front chassis brace
• 2mm thickness
• Swiss 7075 T6 aluminum
• Black anodized
Aluminum T4’19 chassis with special cutout openings for increased flex.
Redesigned to accommodate the T4’19 front chassis brace. The front brace – which can be easily installed on the chassis with two screws – eliminates side flex at the front of the chassis, improving steering response and making the car more predictable.
This chassis is recommended for and works extremely well on medium-to-high traction tracks. (Not recommended for very-high traction conditions where the #301149 - Alu Chassis works better.)
This alu flex chassis generates more traction and makes the car faster and easier to drive. Successfully raced by the factory team, this is a “must have” for every serious racer.
XRAY T4'19 ALU EXTRA FLEX CHASSIS 2.0MM - WORLDS EDITION - 301151
301151 T4'19 Alu Extra Flex Chassis 2.0mm - Worlds Edition
• World Champion chassis
• Special cutout openings
• Increased flex
• Easier to drive
• For low-to-medium traction tracks
• Fits front chassis brace
• 2mm thickness
• Swiss 7075 T6 aluminum
• Black anodized
Aluminum T4’19 chassis with special cutout openings for increased flex. This chassis is recommended for low-to-medium traction tracks as it generates more traction. (Not recommended for high- and very-high traction conditions where either the #301149 or #301150 chassis work better).
The front brace – which can be easily installed on the chassis with two screws – eliminates side flex at the front of the chassis, improving steering response and making the car more predictable.
Successfully raced by the factory team, and used by Bruno Coelho to win the World Champion title, this is a “must have” for every serious racer.
XRAY Alu Countersunk Shim - Orange (4) - 301159-O
XRAY Alu Countersunk Shim - Orange (4) - 301159-O
XRAY T4'19 UPPER DECK 2.0MM GRAPHITE - WORLDS EDITION - 301166
T4'19 Graphite Upper Deck 2.0mm - Worlds Edition
• World Champion top deck
• Narrower design
• Allows increased chassis flex
• Increases traction
• Increases in-corner steering
• For low-to-medium traction tracks
• 2mm thickness
High-quality CNC-machined top deck made from 2.0mm premium graphite material. The special narrower design allows more chassis flex, which helps to generate more traction and increase in-corner steering. Recommended for use with either standard graphite chassis or optional alu chassis on low-to-medium traction tracks.
XRAY T2 Impact Absorbing Front Bumper - 301203
XRAY T2 Impact Absorbing Front Bumper - 301203
XRAY GRAPHITE BUMPER UPPER HOLDER FOR ADJUSTABLE BODY MOUNTS 2.5MM - 301210
CNC-machined front upper bumper holder made from premium-grade graphite material. Direct replacement for the standard composite bumper upper holder. Accommodates the BPA system – Body Position Adjustment – which uses eccentric body mounts in three different positions to adjust the position of the body.
XRAY FOAM BUMPER FOR ADJUSTABLE BODY MOUNTS - HARD - 301232
High-quality hard front foam bumper, hand-cut from specially-developed extra hard foam material. Direct replacement of the standard bumper, this extra hard bumper increases protection for the front of the car in serious crashes. Accommodates the BPA system – Body Position Adjustment – which uses eccentric body mounts in three different positions to adjust the position of the body. Also fits standard centric body mounts. |
XRAY Front Body Mount Set +1mm Height - 301323
XRAY Front Body Mount Set +1mm Height - 301323
XRAY Front Body Mount Set +2mm Height - 301324
XRAY Front Body Mount Set +2mm Height - 301324
XRAY COMPOSITE FRONT ECCENTRIC 6MM BODY MOUNT +1MM HEIGHT - 301327
Front eccentric body mount set with 6mm-thick +1mm height-adjustable body posts. Made from special composite material that provides maximum strength but sufficient flex to reduce body post breakage in hard crashes or car rollovers. The body supports are rounded to have a better fit and provide better support to the car body.
Part of the BPA system – Body Position Adjustment – the eccentric design allows the body posts to be mounted in three different positions to adjust body position.
For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature.
The body holders have elevated mounting to make body height adjustment very quick and easy. In a few short seconds and two clicks, you can exchange all the body holders to adjust body height.
There are two optional body height adjustable mounts available: either +1mm or +2mm.
XRAY COMPOSITE FRONT ECCENTRIC 6MM BODY MOUNT +2MM HEIGHT - 301328
Front eccentric body mount set with 6mm-thick +2mm height-adjustable body posts. Made from special composite material that provides maximum strength but sufficient flex to reduce body post breakage in hard crashes or car rollovers. The body supports are rounded to have a better fit and provide better support to the car body. Part of the BPA system – Body Position Adjustment – the eccentric design allows the body posts to be mounted in three different positions to adjust body position. For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature. The body holders have elevated mounting to make body height adjustment very quick and easy. In a few short seconds and two clicks, you can exchange all the body holders to adjust body height. There are two optional body height adjustable mounts available: either +1mm or +2mm.
XRAY COMPOSITE REAR 6MM ADJUSTABLE BODY MOUNT SET +1MM HEIGHT - 301337
Rear body mount set with 6mm-thick +1mm height-adjustable body posts. Made from special composite material that provides maximum strength but sufficient flex to reduce body post breakage in hard crashes or car rollovers. The body supports are rounded to have a better fit and provide better support to the car body.
Designed for use with graphite inserts that allow adjustment of the rear posts to three different positions, this body mount set is part of the BPA system – Body Position Adjustment.
For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature.
The body holders have elevated mounting to make body height adjustment very quick and easy. In a few short seconds and two clicks, you can exchange all the body holders to adjust body height.
There are two optional body height adjustable mounts available: either +1mm or +2mm.
XRAY COMPOSITE REAR 6MM ADJUSTABLE BODY MOUNT SET +2MM HEIGHT - 301338
Rear body mount set with 6mm-thick +1mm height-adjustable body posts. Made from special composite material that provides maximum strength but sufficient flex to reduce body post breakage in hard crashes or car rollovers. The body supports are rounded to have a better fit and provide better support to the car body.
Designed for use with graphite inserts that allow adjustment of the rear posts to three different positions, this body mount set is part of the BPA system – Body Position Adjustment.
For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature.
The body holders have elevated mounting to make body height adjustment very quick and easy. In a few short seconds and two clicks, you can exchange all the body holders to adjust body height.
There are two optional body height adjustable mounts available: either +1mm or +2mm.
XRAY Alu Adjustable Body Post Stop (2) - 301351-O
XRAY Alu Adjustable Body Post Stop (2) - 301351-O
XRAY ALU ADJUSTABLE BODY POST STOP NUT (2) - 301352-O
XRAY ALU ADJUSTABLE BODY POST STOP NUT (2) - 301352-O
Xray T4 Alu Adjustment Ball-bearing Hub - Black - 302063-K
Xray T4 Alu Adjustment Ball-bearing Hub - Black
XRAY T4'19 SLP SHOCK TOWER FRONT 3.0MM GRAPHITE - 302082
XRAY T4'19 SLP SHOCK TOWER FRONT 3.0MM GRAPHITE - 302082
XRAY ALU FRONT & REAR SUSPENSION ARM 1-HOLE -- SWISS 7075 T6 (2+2) - 302101
XRAY ALU FRONT & REAR SUSPENSION ARM 1-HOLE -- SWISS 7075 T6 (2+2) - 302101
XRAY T2'008 Front Suspension Arm Hard Rubber-Spec 1-Hole - 302163
XRAY T2'008 Front Suspension Arm Hard Rubber-Spec 1-Hole - 302163
XRAY Front Suspension Arm - Hard - Rubber-Spec - 2-Hole - 302165
XRAY Front Suspension Arm - Hard - Rubber-Spec - 2-Hole - 302165
XRAY Front Suspension Arm - Extra-Hard - Foam-Spec - 2-Hole - 302166
XRAY Front Suspension Arm - Extra-Hard - Foam-Spec - 2-Hole - 302166
XRAY FRONT SUSPENSION ARM - HARD - 1-HOLE - 302168
XRAY FRONT SUSPENSION ARM - HARD - 1-HOLE - 302168
XRAY ALU FRONT SUSPENSION ARM - 1-HOLE - SWISS 7075 T6 - 302170
XRAY ALU FRONT SUSPENSION ARM - 1-HOLE - SWISS 7075 T6 - 302170
XRAY GRAPHITE FRONT LOWER ARM PLATE 1.6MM (2) - 302190
XRAY GRAPHITE FRONT LOWER ARM PLATE 1.6MM (2) - 302190
XRAY ALU BRACE POST FOR ARS 3x5x9MM (2) - 302201-O
XRAY ALU BRACE POST FOR ARS 3x5x9MM (2) - 302201-O
XRAY ALU STEERING BLOCKS WITH GRAPHITE EXTENSION PLATES - SET - 302202
Alu steering blocks with ultra-strong construction provides very long life and durability in even the most extreme racing conditions. Composite bushings are used to secure the ball-bearings in both sides of this steering block; this allows the ball-bearings to fit perfectly and turn freely, giving much higher lifetime compared to bearings installed directly into aluminum steering blocks. CNC-machined from premium lightweight T6 aluminum. Black coated. Set of Left and Right steering block.
Alu steering block is recommended for high traction conditions as it improves stability and makes the car turn smoother. The alu steering block is recommended for ARS as well as it allows greater toe in-out gain adjustment possibilities.
The graphite extensions mount to the steering block. Features same ackermann position as the standard composite steering block. The extension is can be mount either from the top or bottom.
XRAY T2 Composite Steering Block Medium Rubber-Spec - 302252
XRAY T2 Composite Steering Block Medium Rubber-Spec - 302252
XRAY COMPOSITE STEERING BLOCK - GRAPHITE - 302254
XRAY COMPOSITE STEERING BLOCK - GRAPHITE - 302254
XRAY T2 Alu Steering Block With Bearings - 302256
XRAY T2 Alu Steering Block With Bearings - 302256
Xray Alu Steering Block - Black - Swiss 7075 T6 - 302257
Xray Alu Steering Block - Black - Swiss 7075 T6
Xray T2 Ball-bearing Composite Bushing (4), X302295 - 302295
Xray T2 Ball-bearing Composite Bushing (4), X302295
XRAY T2 Alu C-Hub Front Block 0 deg. Deg. - orange - 302334
XRAY T2 Alu C-Hub Front Block 0 deg. Deg. - orange - 302334
XRAY T2 Alu C-Hub Front Block, Right 2 deg. Deg. - Orange - 302335
XRAY T2 Alu C-Hub Front Block, Right 2 deg. Deg. - Orange - 302335
XRAY T2 Alu C-Hub Front Block, Left 2 deg. Deg - Orange - 302336
XRAY T2 Alu C-Hub Front Block, Left 2 deg. Deg - Orange - 302336
XRAY T2 Alu C-Hub Front Block, Right 4 deg. Deg. - 302337
XRAY T2 Alu C-Hub Front Block, Right 4 deg. Deg. - 302337
XRAY T2 Alu C-Hub Front Block, Left 4 deg. Deg - 302338
XRAY T2 Alu C-Hub Front Block, Left 4 deg. Deg - 302338
XRAY T2 Alu C-Hub Front Block, Right 6 deg. Deg. - 302339
XRAY T2 Alu C-Hub Front Block, Right 6 deg. Deg. - 302339