When thinking about the best think about the JP8.

The ALL NEW ultra downforce body shell has been developed with the collaboration of our wordwide team drivers, who participated to the several stages of the project. The JP8 includes all of our experience gained in over 10 years of presence on the racetrack, and the final version of the body requested many changes before reach the perfect shape. To raise the bar we not accepted any compromise.

Tested for several months both indoor and even outdoor on different types of carpet and tarmac, the JP8 body shell represent a new reality for drivers all around the world who race at top levels and always want to obtain the best result with their models.

No Compromise

The JP8 project is born with one main target: create an all new ultra downforce body shell that can be the fastest, always. No matter what final shape and lines the body will have, how it will look, the focus during the designing stage has been pure performance.

LIGHTNESS and STRENGTH! Thanks to an excellent production process, which guarantees a high homogeneity of the material in any area of the body, we have reached a good compromise between weight and durability of the product. Several track tests have revealed excellent impact resistance, giving the JP8's extremely longevity.


 

The Art of Performance at his best

To achieve the best result possible in term of overall product we have made the most of all our know-how, our experience on the track allowed to us to develop, to design, to engineer and to test for several months a body shell that represent the new future for the 1/10 TC competitions.

The ultra downforce design generate impressive steering as well an excellent rear stability; very easy to push the car at limit, the driving feeling is great both on indoor and outdoors layouts.

---

Product Features

The body respect all the international specs necessary for the approval by the federations, its EFRA, IFMAR and BRCA homologated.

• Made with high quality and genuine polycarbonate Lexan®
• Included in the kit a complete set of screw, nuts and large plastic washers to fix properly the rear wing
• Produced in Light Weight version, thickness of material 0,75mm
• Sold clear with protective film outside
• Included in the package a few decal sheets pre-cut and windows mask

---

Track Guide for the use of the JP8 body

The following values offer an overview of the ideal conditions of use of the body according to the grip of the surface and its general handling.

The numbers below are meant as a progressive scale where 10 is a hypothetical maximum value.

   
Surface grip 
7 
Enter Steering
10
Rear stability
10
Ease of use
10

 

Hobbywing XeRun XR10 PRO-STOCK SPEC V4 ESC 80A Black - 30112401

HUDY 1/10 TC Tires A1-36 - Asphalt
 

* 1/10 touring car tires

* A1-36 compound for asphalt tracks

* Improved traction & durability

* Unique tough rubber compound

* Improved lifetime

* Factory pre-glued

* Optimized new insert hardness

* Optimized new insert thickness

* Reinforced and stronger wheels

* Set of 4

The A1-36 is a tire specifically designed for asphalt tracks, and it has a unique tough rubber compound formulated for high-competition asphalt racing. New improved compound improves traction but at the same time makes the car more stable and easier to drive. The lifetime and reliability of the rubber is significantly improved as well.

Set of 4 tires includes new inserts with improved quality and optimized hardness and thickness. Tires are precision pre-glued on HUDY touring car wheels moulded from our own composite mixture to ensure true fit, vibration-free running as well as proper hardness matched to the tire compound. The new wheel material improves durability.

An overall no-compromise, high-competition racing tire with maximum traction and unmatched stability.

MIBO Aluminium Cooling Fan GOLD made in 30x30x10mm dimension provides 28.000 RPM at voltage 5 - 8.45 V. The aluminum material not only provides the necessary strength, but also makes the fan a nice design addition to your RC car. Each fan includes also sheet of stickers (6pcs) where you can choose your favorite design of ring. Fan is designed for motor cooling.

Mon-Tech 0.75mm Racer Wing Medium - 018-003M

Mon-Tech Montecarlo Touring Electric Car Clear Body 190mm - 019-013

Mon-Tech Nazda6 2.0 Touring Electric Car Clear Body 190mm La Leggera - 010-001L

Mon-Tech Racer2 Touring Electric Car Clear Body 190mm - 019-006

FLOW-MAX2™ OPTIMIZED COOLING DESIGN
FLOW-MAX2™ Air hole designed maximum cooling through various tests. 

RPM LIMIT BLINKY MODE
FLETA EURO V2 ESC has RPM Limit mode functions. 
Using the RPM Limit mode, ESC control the limit RPM when your driving. This mode more fair control stock race. This function operate "Blinky V3.0_25RE2" firmware, Easy setup change of Normal Blinky mode and RPM limit Blinky mode with out firmware update . 
FLETA EURO V2 is the black translucent case, so you can easily check the mode.

DIRECT MOTOR & ESC COOLING FAN POWER
Battery power directly supply to the cooling fan, be able to do more high RPM cooling to ESC, Motor. ESC had separate motor cooling fan port, no needs soldering for the motor cooling fan wire.

- Optional Part-
MR-TU25FAN Turbo Cooling Fan 25x25x10mm 
MR-TU30FAN Turbo Cooling Fan 30x30x10mm
MR-TU40FAN Turbo Cooling Fan 40x40x10mm 

FELTA EURO V2 ESC Cooling fan is directly connected to the battery. However, if ESC turns off, the cooling fan will operate even. So battery voltage may drop if left unattended for a long time.

INTERNAL SWITCH SYSTEM
FLETA EURO V2's internal switch makes the wiring convenient.
- Power On/Off
- Calibration Setup
- RPM Limit Blinky mode <> Normal Blinky mode 

If you want to change Blinky mode, With the power on Press setup button successively 3 times . 
You can check which Blinky mode with LED status.

Normal Blinky mode: Green Fast Flashing
RPM Limit Blinky mode: Green Flashing twice and Red flash once

COMPACT & LIGHTWEIGHT DESIGN
FLETA EURO V2's compact & lightweight design, will make variety layout and spacious space on chassis. more easy adjusting the chassis balance.
Included 20x20mm ESC Cooling Fan and Motor connectors Female 3pcs, Male 3pcs

Current Continuous Continuous 80A / Peak 380A Input 2S LiPo, 2S LiFe, 5-7 cell NiMh/NiCd BEC Output Switch Mode 6V/7.4V @3A Suppoerted Motor Type 540 size 2 pole brushless with sensor type Suitable Motor Over 9.5T Size 26.5 x 32.7 x 17mm Weight 21.5g (without Wire, Capacitor and Cooling fan)

Model No.: NXEC8000/100-2S2P-HV-GR 
Typical capacity : 8000mAh
Typical Voltage: 7.6V
Dimensions: 25.1*46.5*138.0mm
Approx Weight: 326.0g
Hard Case: Black
Plug: Banana Plug and T-Plug
Continuous Discharge Current: 100C
Burst Discharge Current: 200C
Charge Rate: 1-3C Recommended, 5C Max
 
RC Lipo Battery Pack Built with the highest quality single cells Engineered and optimized specifically for RC planes and RC cars unmatched energy and power density Increased flight time (about twice that of comparable NiMH packs) Significantly decreased weight compared to NiMH or NiC packs Smaller physical size to easily fit in your RC aircraft No memory effect The ability to supply current at high rate.

RacingLine-RC Tire Cutter Pro - RL-0001

Racingline-RC Tyre-Cutter Get maximum performance from your new tourigcar tyres

THE control tyre for Europe! This was the tyre selected for the 2010 EFRA European Championships. Great tarmac performance for warmer European conditions. Built with the 36R tyre, with a yellow insert and Stiff light wheel.
 

Schumacher Racing have an automated in house gluing process which accurately controls the glue flow rate and quantity. This has helped us to establish an excellent reputation for quality and consistency of pre-glued tyres. However, the driver should check that the tyres are firmly glued before each race.

The new Sunpadow battery 6000 mah
With countless tests and feedback from Sunpadow best drivers around the globe, the Sunpadow R&D team constantly improved the formula and releases the new Platin series. The first member is the CS 6000mAh stick pack designed for competition of STOCK classes. This battery features excellent discharge capacity combined with lightweight design which is essential for highest RC car racing competition in STOCK classes. 
By adjusting the product formula structure, adding the latest high-tech lithium-ion battery TT synergistic material, the battery weight is reduced by 4% compared with the Gold label 6000mAh. 
The Platin series batteries feature a significant improvement in terms of punch and power which is gained via IR reduction of the cells. A powerful discharge performance and a more balanced frame weight distribution will help you for better performance and faster lap times at the racetrack to bring home more victories. 

Product information "Volante V5 Tough 1/10 36R TC Rubber Tire Preglued 4pcs"
The new "T" type tire carries the same high quality combination from the original V5, however with a new minimal air gap and new "Tough" rubber content. Making this the ideal tire choice, if longevity and stability is your preference. 
Best performs at outdoor asphalt tracks.

The latest establishment from Volante's tyre development brings you the premium Volante V5 tyre. Developed by Word Champions, the Version 5 combines maximum speed with maximum longevity. 
Tested on a variety of tracks around the world, the V5 provides superior traction to any other tyre, whilst limiting the "drop off" experienced by many other tires on the market. The tyre and wheel combination is perfectly true, meaning no vibration when driving. Minimum excess moulding material makes it unnecessary to "sand" or "cut" the line from now, making it less time consuming and risky preparing new tires. 
Volante V5's will be able to provide you with premium traction and longevity in any condition.

Featuring the industry first 9 exhaust fins design which generates a twisting wind pattern for focused air flow, hence more air to cool the object. With the 9 exhaust fins design the support structure between the case and the core has increased 3 fold, together with thicker side wall the case is so much stronger than the standard 30 mm fan. A round lip also moulded into the intake side of the fan for further smooth out the air flow. Last but not least, these fans have been manufactured with all new electronics.

XRAY Narrow Pinion Gear Alu Hard Coated 38T : 64 - 305988

XRAY Narrow Pinion Gear Alu Hard Coated 42T / 64 - 305992

XRAY Offset Spur Gear 100T : 64 - 305870

XRAY ORANGE Offset Spur Gear 100T : 64 - 305870-O

XRAY ORANGE Offset Spur Gear 110T : 64 - 305880-O