There are no products in your shopping cart yet.
Masters Of Foam
Loading...
Contact RC Foam Tyres - 1/12 Front DOUBLE PINK 35Sh A foam-44mm
€ 9,99
“A” Foam is our most durable, affordable tyre. Perfect if you want to go many runs without taking the wheels off the car during weekly club racing. The wear rate of this foam is the lowest in the range, even lower than seen with “T” foam. It rarely offers the overall performance of the others, however in lower traction conditions; occasionally it is a match for the more expensive options. Suggested for use on Primafelt or CRC Black carpet, or when oily additive is in use.
Contact RC Foam Tyres - 1/12 Hex Rear 30Sh Control Tyre 46mm
€ 11,50
Contact RC Foam Tyres - 1/12 Hex Rear 30Sh Control Tyre 46mm
Contact RC Foam Tyres - 1/12 Hex Rear Soft Pink 28Sh A Foam 46mm
€ 10,50
Contact RC Foam Tyres - 1/12 Hex Rear Soft Pink 28Sh A Foam 46mm
Contact RC Foam Tyres - 1/12 Rear MAGENTA 32Sh A foam-46mm
€ 10,50
Contact RC Foam Tyres - 1/12 Rear MAGENTA 32Sh A foam-46mm
ECLIPSE 5 - 1/12TH CIRCUIT - KIT
€ 349,99
The Schumacher Eclipse cars are the current reigning 1/12th scale IFMAR World and EFRA European Champions in both modified and stock classes.
The New Eclipse 5 features an extensive list of refinements, making it even faster and better handling.
The Eclipse 5 is the ultimate professional LMP12 racing chassis kit. The choice of champions!
- NEW - Alloy chassis design with a much shorter overall length. This allows for reduced chassis scrubbing along with a significant weight reduction from beyond both front and rear axles. These benefits allow the car to enter a corner more effortlessly and when in the corner, rotation is achieved more freely.
- NEW - Upgraded left and right rear hex wheel clamps to prevent any wheel wobble issues. Now perfectly true running wheels with our unique single nut rear wheels/solid axle!
- NEW - Servo mounting has been improved, resulting in direct mounting for the Sanwa micro range of servos such as the PGS-HR and SRG-HR. Direct and easy alignment onto the centre of the car. In doing this the chassis flexibility characteristics have been vastly improved, for performance and strength, by removing the large, off centre transverse slots previously used. All other brands of servo still can be used with the ultra-lightweight floating servo mount, included.
- NEW - Lightweight and flexible 3D printed rubber bumper, offering perfect body shell protection. Compared to the previous foam bumper, it is also very durable and long lasting.
- NEW - Black aluminium steering turnbuckles now included. Stealth and lighter weight.
- NEW - Updated top decks design, further reducing the polar moment of inertia. They now secure at the front within the wheelbase.
- NEW - The front lower beam has been improved, mounting in line with the front axle, and further reducing this forward weight, allowing for the reduced chassis length. The new beam makes use of super easy, slide in, speed secret ride height spacers. 0.5mm U7920 and 0.75mm U7921.
- NEW - Independent and lightweight front bumper mount makes front end assembly far easier. The front bumper can now be removed with only 2 screws.
- NEW - Moulded lighter weight front hub carrier design with much improved suspension action and damping characteristics. Un-sprung mass has also been reduced.
- NEW - Tweak free and easy LiPo mounting using new lighter weight O-ring fixing.
- NEW - Interchangeable front LiPo position stops with 4 equally spaced settings included.
- NEW - Optional 1.0° camber strap available. 1.5° camber is included in the kit for maximum steering and lap time in most conditions.
- NEW - Pod offset has been refined to achieve the perfect pod balance with a wider range of modern motors.
- NEW - Lightweight pod carbon parts for lower centre of gravity and overall car weight.
- NEW - Underside Variable Chassis chamfers, offering improved ground clearance, smoother scrubbing and better clearance to curbs or other corner markers.
Not forgetting all the usual features that have made the Eclipse IFMAR World and EFRA European Champion.
- Range of optional colour coded front springs.
- Big Bore side and centre dampers offering long lasting damping. They also give great damping oil retention (less frequent maintenance required) and a compact and central design. Damper geometry changes have improved damping characteristics.
- Lightweight pod assembly for smoother, more predictable drivability and bump handling. Strengthened for tweak prevention.
- Lightweight Low Centre of Gravity CNC Alloy Motor Mounts.
- Rear ride height adjusters, easier adjustment and 0.25mm height increments.
- Front beam socket using O-ring fixing system.
- Thread insert design making work on the car much quicker and simpler.
- Easy body shell height adjustment.
- Extra low rear roll centre pivot height for awesome rear traction.
- Centre pivot design for easy build and maintenance, with a fully bind free design.
- All black nuts as standard.
- Perfectly balanced rear pod assembly.
- Ultra-low motor position.
- Full range of colour coded rear and side springs.
- Separate springs for independent roll and bump stiffness adjustment.
- Ball bearing front and rear axles.
- Adjustable toe-in/out.
- Chassis balance pivot holes. For use with U3582 Precision Balance Pivot Set. (Available Separately) To optimise left/right weight distribution.
- Rear tweak adjustment via side springs.
- Simple rear droop adjustment.
- Small Kimbrough servo saver with stiffener included as standard.
- High tensile steel hex screws used throughout.
- High quality easy to follow instruction manual.
- Range of World Championship Winning Contact RC foam tyres available.
- Accepts a huge range of industry standard body shells, motors, LiPo’s and speed controllers.
- Suitable for USA rules GT12 racing.
|
|
Gens ace Redline Series 8000mAh 3.8V 1S 130C HV LiPo (4mm, 147g)
€ 52,50
Gens Ace Redline Series 1S 130C 8000mAh Hardcase LiPo Battery Pack, with a factory installed 4.0mm bullet. Consumers trust the Gens Ace name to deliver the dependability and high performance they expect. The Gens Ace 130C 1S 8000mAh 3.8V HV LiPo battery pack has a high-capacity, high-discharge rate that gives you the power and run-time you expect.
Features:
- Stable automatic stacking technology enables single cell capacities of 4000mAh.
- The most strict single cell capacity, voltage, resistance, discharge curve matching process.
- Standard ∮4.0mm bullet.
Specifications:
| Capacity | 8000mAh |
| Voltage | 3.8V / 1S2P / 2 Cells |
| Discharge Rate | 130C |
| Max Burst Discharge Rate | 260C |
| Weight | 147g |
| Size | 93 x 47 x 18 mm (L x W x H) |
| Connector Type | 4.0mm bullet |
Hot Race 1/12 Front Foam Tires Hagberg Edition (2pcs/White Rims)
€ 11,50
Hot Race 1/12 Front Foam Tires Hagberg Edition (2pcs/White Rims)
Hot Race 1/12 Rear Foam Tires Hagberg Edition (2pcs/White Rims)
€ 12,50
Hot Race 1/12 Rear Foam Tires Hagberg Edition (2pcs/White Rims)
LRP HV 1/12 Ultra LCG GRAPHENE-4.1 8100mAh Hardcase battery - 3.7V LiPo - 120C/60C
€ 89,95
LRP HV 1/12 Ultra LCG GRAPHENE-4.1 8100mAh Hardcase battery - 3.7V LiPo - 120C/60C
MobGums 1/12 dishers front tyres magenta compound - MOBF032
€ 11,25
MobGums 1/12 dishers front tyres magenta compound - MOBF032
MobGums 1/12 dishers front tyres silver compound for ETS carpet new! - MOBF135
€ 11,50
MobGums 1/12 dishers front tyres silver compound for ETS carpet new! - MOBF135
MobGums 1/12 dishers front tyres white compound for ETS carpet - MOBF035
€ 11,50
MobGums 1/12 dishers front tyres white compound for ETS carpet - MOBF035
MobGums 1/12 dishers rear tyres silver compound for ETS carpet - MOBR135
€ 11,95
MobGums 1/12 dishers rear tyres silver compound for ETS carpet - MOBR135
MobGums 1/12 dishers rear tyres white compound for ETS carpet - MOBR335
€ 11,95
MobGums 1/12 dishers rear tyres white compound for ETS carpet - MOBR335
Protoform AMR-12 Light Weight Clear Body - 1611-21
€ 29,95
Protoform AMR-12 Light Weight Clear Body - 1611-21
One of the longest running classes in R/C, 1/12th On-Road is still a favorite with racers and enthusiasts the world over. It has continued to evolve and grow in recent years, much to the delight of many. PROTOform has a long history of designing winning bodies for the ultra quick and nimble 1/12th On-Road class - with numerous ROAR Nationals, US Indoor Champs, Snowbird Nationals as well as IFMAR WORLDs titles on its resume.
The AMR-12 has continued the legacy, with an unprecedented 4-straight IFMAR 1:12 World Titles:
2010: Naoto Matsukura
2012: Naoto Matsukura
2014: Marc Rheinard
2016: Naoto Matsukura
It's made to fit all the popular 1/12th chassis with design considerations built in to accommodate the larger brushless motors and lead wires. A decal sheet with headlights to meet new body regulations is also included.
SkyRC Smart Weight System SCWS2000 for RC Cars
€ 119,95
SkyRC SCWS2000 is a smart Bluetooth-enabled Corner Weight System specially designed for RC drivers. It is applicable to drift, touring cars, and so on.
It can help the driver easily measure and view the RC car's corner weight distribution through the App.
Therefore, RC drivers can accurately adjust their car's weight at each corner to the best balance to win the race. It consists of four separate scales. The maximum weight limit of each scale is 2000 grams(8000 grams totally).
(adjustable from one to thirty minutes via App)
Speedtech RC Foam Liquid multiple world champion and european champion - MOB1000
€ 12,95
Speedtech RC Foam Liquid multiple world champion and european champion - MOB1000