There are no products in your shopping cart yet.
Plugs / Adapter Cables
1 / 5
Loading...
Connector : Molex 2P Female plug with 100mm 22awg cable (1pcs)
€ 1,95
Connector : Molex 2P Female plug with 100mm 22awg cable (1pcs)
10AWG SILICON WIRE - BLACK - 1 METRE
€ 6,95
Heavy duty Core RC 10 AWG wire in black. For those high load applications, very flexible insulation for easy neat wiring.
110MM FLAT BONDED FLEX SENSOR WIRE
€ 6,95
Keep your wiring super neat with this CORE RC flat sensor wire. Cool black look.
1up Racing Heatsink Bullet Plug Grips - Fits LowPro Bullet Plugs (2pcs)
€ 18,99
1up Racing Heatsink Bullet Plug Grips - Fits LowPro Bullet Plugs (2pcs)
1up Racing Heatsink Bullet Plugs - 4/5mm Stepped (2pcs)
€ 19,99
Includes 1 pair of 1up Racing 4/5mm Stepped Heatsink Bullet Plugs. Slide the Heatsink Grips over the included LowPro Bullet Plugs and secure with the included set screws. These are perfect for adding some extra bling and improved grip to your charge leads!
1up Racing LowPro Bullet Plugs & Grips - 4/5mm Stepped - Black/Red (2pcs)
€ 15,95
1up Racing 4-5mm LowPro Bullet Plugs with Bullet Grips. These are perfectly paired to add to any charge lead where you need 4mm or 5mm bullets. Included with these are the LowPro Bullet Plug Grips. These are a great way to quickly identify your positive and negative leads.
Installation of the Bullet Plug Grips is super easy. After soldering, slide the grip over the LowPro bullet and use a couple drops of CA glue to keep it in place.
Includes:
- (2) 4-5mm stepped bullets
- (2) LowPro bullet plug grips
1up Racing Pro Wire Clamp - 12/14 Gauge 3 Wire
€ 18,95
1up Racing Pro Wire Clamp - 12/14 Gauge 3 Wire
270MM FLAT BONDED FLEX SENSOR WIRE
€ 6,95
Keep your wiring super neat with this CORE RC flat sensor wire. Cool black look.
810001, Laadkabel voor accu´s m. een Tamiya stekker
€ 5,00
Laadkabel voor accu´s met een Tamiyastekker
810036, XHR Balancerlaadkabel 2S car hardcase
€ 13,99
XHR Balancerlaadkabel 2S car hardcase
2 x Bananenstekker 1 x 2mm goudstekker EHR-stekker met 0,25mm² kabel
Adapter, Traxxas iD LiPo battery (adapts Traxxas iD batterie
€ 14,95
Adapter, Traxxas iD LiPo battery (adapts Traxxas iD batterie
Aluminum Heatsink Bullet Plug Heads (2) absima
€ 4,95
Aluminum Heatsink Bullet Plug Heads (2)
These high-gip heatsink caps are used on the one hand to prevent polarity reversal due to the colored anodized caps and on the other hand to minimize losses due to heating connectors. Due to the non-slip surface, the connectors can be firmly and securely plugged into the battery and also removed accordingly well.Features:
- Material: Aluminum
- Screwable
- Serve as miniature heat sink
- 2 screwable heatsink caps (red & black)
charge lead with dummy-glow plug style connector, to use for glow-heater.
€ 5,00
charge lead with dummy-glow plug style connector, to use for glow-heater.
CHARGE LEAD XH2S BALANCE PORT-BLUE-1PC
€ 14,95
2S Lipo charge lead with 4mm charger input plugs and 4-5mm battery plugs, including 2mm balance plug. 600mm. Extremely versatile, suits a wide range of chargers!
CHARGE LEAD XH2S BALANCE PORT-ORANGE-1PC
€ 14,95
2S Lipo charge lead with 4mm charger input plugs and 4-5mm battery plugs, including 2mm balance plug. 600mm. Extremely versatile, suits a wide range of chargers!
CHARGE LEAD XH2S BALANCE PORT-WHITE-1PC
€ 14,95
2S Lipo charge lead with 4mm charger input plugs and 4-5mm battery plugs, including 2mm balance plug. 600mm. Extremely versatile, suits a wide range of chargers!
CHARGE LEADS - FUTABA RX
€ 6,95
Great charging lead for charging receiver and transmitter packs. 4mm input connectors and Futaba output.
CHARGE LEADS 4MM - XH2S BALANCE - FUTABA RX
€ 8,95
Charge Lead 4mm to Futaba Rx Balance - Black. 2S LiPo charge lead with 4mm charger input plug and Futaba Rx output with XH2S balance plug. Extremely versatile, for balancing charging 2S receiver and transmitter packs.
CHARGE LEADS XH2S BALANCE BLACK - SHORT
€ 10,95
Charge Leads XH2S Balance Black - Short 2S Lipo charge lead with 4mm charger input plugs and 4-5mm battery plugs, including 2mm balance plug. 300mm. Extremely versatile, suits a wide range of chargers
CHARGE LEADS XT60-XH2S BALANCE PORT - SHORT
€ 10,95
Charge Leads XT60 to XH2S Balance Black - Short 2S Lipo charge lead with XT60 charger input plug and 4-5mm battery plugs, including 2mm balance plug. 300mm. Extremely versatile, suits a wide range of chargers!
Charging Cable XT60 - XT90/XT60/T-plug/Tamiya/FUT/JR
€ 15,95
Charging Cable XT60 - XT90/XT60/T-plug/Tamiya/FUT/JR
Features:XT60 to XT60 , XT90, T-Plug, FUT/JR, Tamiya connector.
Suitable for all common chargers
Cable length 300 mm
Cable type: 14AWG (XT60 charger connection) / 16AWG (battery connection) / AWG22 /JR connection)
Scope of delivery:
1 pcs. multi charging cable
Charging Cable XT60 fits for T-plug 15cm ABSIMA
€ 4,95
Version: XT60 to T-Plug
Suitable for all common chargers with XT60 output connector
Cable length: 150 mm
Cable type: 14AWG
Charging Cable XT60 fits for Traxxas 15cm ABSIMA
€ 4,95
Version: XT60 outplug plug / battery input plug fits for Traxxas
Suitable for all common chargers with XT60 output connector
Cable length: 150 mm
Cable type: 14AWG
