XRAY T4F 2019

ALU FRONT 1-PIECE SUSPENSION HOLDER - REAR - FR - 302720-O

Hudy Graphite Grease - 106210

HUDY ULTIMATE SILICONE OIL 300 000 cSt - 50ML - 106630

HUDY ULTIMATE SILICONE OIL 450 cSt - 50ML - 106345

Silicone O-Ring 24X0.7 (10) - 971240

Silicone O-Ring 3X2 (10) - 972030

Silicone O-Ring 5X2 (10) - 972050

Front Body Mount Set

XRAY 4S SPRING-SET C = 2.5 (2) - 308275

XRAY Alu Adj. Turnbuckle L/R 26 Mm - Swiss 7075 T6 (2) - 303212

XRAY ALU ANTI-ROLL BAR BUSHING - ORANGE (2) - 303432-O

XRAY ALU CAP FOR XRAY SHOCK BODY #308322 - ORANGE - 308327-O

XRAY ALU FRONT LOWER 1-PIECE SUSPENSION HOLDER - FRONT - FF - 302710-O

XRAY ALU GEAR DIFF OUTDRIVE ADAPTER - 7075 T6 (2) - 304970

XRAY ALU LOWER 2-PIECE SUSPENSION HOLDER - 303710-O

XRAY ALU REAR LOWER 1-PIECE SUSPENSION HOLDER - REAR - RR - 303720-O

XRAY ALU SERVO MOUNT - LONG - 306201

XRAY ALU SHIM 3x6x4.0MM - BLACK (10) - 303127-K

XRAY Antenna (2) - 306310

XRAY Antenna Mount - Thin - 306301

XRAY ANTI-ROLL BAR FOR BALL BEARINGS - REAR 1.3 MM - 303803

XRAY Ball End 4.9mm With Thread 10mm (2) - 362652

XRAY BALL END 4.9MM WITH THREAD 5MM (2) - 362649

XRAY Ball End 4.9mm With Thread 6mm (2) - 362650

XRAY Ball End 4.9mm With Thread 8mm (2) - 362651

XRAY Ball Universal 5.8 mm Hex (4) - 303241

XRAY Body Clip For 6mm Body Post (4) - 309402

XRAY COMPOSITE ANTI-ROLL BAR BALL JOINT 4.9 MM (4) - 303455

XRAY Composite Dual Servo Saver Arm - 302526

XRAY COMPOSITE GEAR DIFF BEVEL & SATELLITE GEARS (2+4) - 304930

XRAY COMPOSITE GEAR DIFF CROSS PIN - 304980

XRAY COMPOSITE GEAR DIFF. CASE & COVER - 304910

XRAY Composite Lipo Battery Backstop (2) - 376130

Rear body mount set includes 6mm thick body posts made from special composite material that provides maximum strength but sufficient flex to reduce body post breakage in hard crashes or car rollovers. The body supports are rounded to have a better fit and provide better support to the car body. 

XRAY Composite Servo Saver - X-Stiff - Set - 372503

XRAY Composite Set Of Servo Shims (4) - 306219

XRAY Composite Set Of Wheelbase Shims (3X1mm, 1X2mm) (2) - 303129

XRAY DIFF GASKET (4) - 304990

XRAY Drive Shaft Pin 2 X 10 With Flat Spot (2) - 305392

XRAY Drive Shaft Replacement Plastic Cap 3.5 mm (4) - 305241

XRAY E-Clip 5 (10) - 965050

XRAY Eccentric Bushing Set (2) - 362315

XRAY ECS (ES) DRIVE SHAFT Case for 2mm Pin - 305254

XRAY ECS (ES) DRIVE SHAFT 51MM FOR 2MM PIN - HUDY SPRING STEEL(1) - 305221

XRAY ECS DRIVE AXLE FOR 2MM PIN - HUDY SPRING STEEL - 305346

XRAY ECS DRIVE SHAFT COUPLING FOR 2MM PIN - HUDY SPRING STEEL - 305253

XRAY ECS DRIVE SHAFT PIN 2 x 9 WITH FLAT SPOT (2) - 305394

XRAY ECS ES (EXTRA STRONG) DRIVE SHAFT 51MM-HUDY SPRING STEEL SET - 305334

XRAY Front Body Mount Set 6mm - 301322

XRAY FRONT SUSPENSION ARM - HARD - 1-HOLE - 302168

XRAY GEAR DIFFERENTIAL - SET - 304900

Xray Hex Screw Centering Sb M3x12 (10)

XRAY Hex Screw Sb M3X4 (10) - 901304

XRAY HIGH-PERFORMANCE KEVLAR DRIVE BELT 3 x 144 MM - 305448

XRAY High-Speed Ball-Bearing 10X15X4 Rubber Sealed (2) - 941015

XRAY High-Speed Ball-Bearing 5X10X4 Rubber Sealed (2) - 940510

XRAY Long Composite Lipo Battery Backstop (1+1) - 306184

XRAY Offset Spur Gear 96T : 64 - 305866

Xray Pin 2x9.8 (10),

XRAY Rear Body Mount Set 6mm - 301332

XRAY REAR SUSPENSION ARM - HARD - 1 - HOLE - 303168

XRAY SUSPENSION PIVOT PIN (2) - 307216

Precision-molded 16T layshaft pulleys for XRAY T2’008, includes composite shim. Standard pulleys for XRAY T2’008 EU Rubber-spec Edition. Set of 2.

XRAY T2 Alu Wheel Hub - Black (2) - 305350-K

XRAY T2 Ball Joint 5 mm Open (4) - 303454

XRAY T2 Ball Joint 5 mm Open (8) - 302663

XRAY T2 Composite C-Hub Left 4 deg. Deg. Medium Rubber-Spec - 302364

XRAY T2 Composite C-Hub Right 4 deg. Deg. Medium Rubber-Spec - 302363

XRAY T2 Composite Steering Block Hard Foam-Spec - v2 - 302253

XRAY T2 Composite Upright 0 deg. Outboard Toe-In Hard Foam-Spec - 303354

XRAY T2 Front Arm Pivot Pin (2) - 307221

XRAY T2 Mounting Hardware Package Set - 309301

XRAY T2 Rear Arm Pivot Pin (2) - 307321

XRAY T2 Shock Ball Joint Open (4) - 308316

XRAY T2 Steel Steering Bushing (2+2) - 302291

XRAY T4 ALU STEERING PLATE 8.5MM FOR DUAL SERVO SAVER - ORANGE - 302547-O

XRAY T4 COMPOSITE ADJUSTMENT BALL-BEARING HUB (4) - 302062

XRAY T4 COMPOSITE BRACE FOR BUMPER - LOW (2) - 301325

XRAY T4 COMPOSITE PISTONS 4-HOLE 1.0-1.2MM, 3-HOLE 1.0-1.2MM - 308037

XRAY T4 HARDENED SHOCK SHAFT (2) - 308364

XRAY T4 SHOCK ABSORBER MEMBRANE (4) - 308082

XRAY T4 SHOCK FOAM INSERT (4) - 308092

XRAY T4'17 ALU SERVO MOUNT - ORANGE - 306204-O

XRAY T4'17 GRAPHITE FLOATING SERVO HOLDER 3.0MM - 306233

XRAY T4'19 ALU LOWER ADJUSTMENT BULKHEAD - FRONT L / REAR R - ORANGE - 302763-O

XRAY T4'19 ALU LOWER ADJUSTMENT BULKHEAD - FRONT R / REAR L - ORANGE - 302762-O

XRAY T4'19 ALU UPPER CLAMP WITH 2 ADJ. ROLL-CENTERS (L+R) - ORANGE - 302036-O

Ultra-light, ultra-strong front upper clamp for bulkheads CNC-machined from premium Swiss 7075 T6 aluminum. The front upper clamps holds the lay shaft which keeps the design of the car very tidy and very easy for the maintenance of the car. 

Features integrated centering pin to easily mount the graphite shock tower in the proper position, and more importantly ensure that the shock tower will not move in a crash and the shocks will remain in position. 

Milled to remove unnecessary material to reduce their size and weight. Orange color.

Lower bulkhead with anti-roll bar mounting area for front left side. CNC-machined from premium Swiss 7075 T6 aluminum, the bulkhead has been designed to provide the lightest and strongest possible support framework for the car. Positioned towards the chassis centerline to provide maximum traction & steering, and proper balance. Color anodized in a distinctive orange color.

Lower bulkhead with anti-roll bar mounting area for front right side.  CNC-machined from premium Swiss 7075 T6 aluminum, the bulkhead has been designed to provide the lightest and strongest possible support framework for the car. Positioned towards the chassis centerline to provide maximum traction & steering, and proper balance. Color anodized in a distinctive orange color.

CNC-machined motor mount made from premium Swiss 7075 T6 is part of the left layshaft bulkhead to eliminate unwanted tweak. Color anodized in a distinctive orange color, and finished with stylish edges. The design of the motor mount allows for super easy installation of the motor using only 3 screws. The mounting positions are strategically located to provide the correct chassis flex but in the same time designed to provide maximum durability. The motor mount is designed to keep the CG of the car as low as possible.

XRAY T4F ALU SOLID LAYSHAFT - BLACK - 305522-K

Front anti-roll bar for T4F, 1.3mm thick. Laser-engraved for easy identification.

Anti-roll bar wires of different thickness are optionally available for fine-tuning the set-up of your car.

CNC-machined drive axle for XRAY T4F made from world-renowned HUDY Spring Steel™.

High-quality front foam bumper, from high-density foam material. Super-lightweight material makes the bumper very light but effective to protect the front of the car in serious crashes.

CNC-machined front upper bumper holder made from premium-grade graphite material. The upper graphite bumper holds the entire bumper assembly together.

The 2.2mm thick chassis is CNC-machined from premium-grade graphite material and features pre-drilled holes for optional parts such as chassis weights and adjustable battery holder. The ultra-narrow chassis design ensures a very reactive and easy handling of the car.

CNC-machined front shock tower made from 3.0mm thick premium-grade graphite material to guarantee maximum strength and long life. Designed to be used with ULP (Ultra-Low Profile) shocks. 

The shock tower features alignment holes for the upper clamp centering pins that ensure perfect fitment of the shock tower in exactly the same position every time the shock tower is removed & assembled, helping to eliminate tweak or uneven spring pre-tension of the shocks. 

The shock mounting holes were designed and tested to provide the best dampening characteristics and to work on all surfaces and traction conditions.

CNC-machined rear shock tower made from 3.0mm thick premium-grade graphite material to guarantee maximum strength and long life. Designed to be used with ULP (Ultra-Low Profile) shocks. The shock tower features alignment holes for the upper clamp centering pins that ensure perfect fitment of the shock tower in exactly the same position every time the shock tower is removed & assembled, helping to eliminate tweak or uneven spring pre-tension of the shocks. The shock mounting holes were designed and tested to provide the best dampening characteristics and to work on all surfaces and traction conditions. Features multiple positions for body post mounting depending on the body used.

High-quality CNC-machined top deck made from 2.0mm premium graphite material works great in most conditions with the standard graphite chassis. The shape of the rear portion of the top has been specifically designed to achieve more traction and in-corner steering.