Tamiya

This Hop Up Option comes standard in the TT-02 Type SR kit. It’s available separately for use in the standard TT-02 Type S kit. This part lets you take advantage of the new toe system with bushings on your standard TT-02 Type-S chassis car!

• Steel Adjustable Suspension Mount (Rear) x1
• Plastic Bushings Sprue (Item 54922) x1
• Steel mount provides a solid anchor in rear suspension.
• Plastic bushings take the suspension shafts – using different bushings and combinations allows fine-tuning of toe and skid angle.
• Can be used with separately sold rebound stoppers.
• Compatible with TT-02 Type-S and TT-02 Type-SR chassis cars.

These rocker arm posts replace the stock Tamiya TC-01 chassis posts, which will reduce overall weight to your machine.

• Aluminum Rocker Arm Posts x4
• These are precision, lightweight aluminum parts, which lighten the chassis by nearly 2 grams.
• Components have a hard-anodized finish for durability.
• Compatible with TC-01 chassis cars.

These spacers are designed to gain even greater precision in your touring car model tread setup (the width between the wheels), with these 0.5mm/1.0mm spacers.

Contains Aluminum Wheel Spacers 0.5mm (4) 1.0mm (4) 
Altering the tread of the car allows you to modify the stability of the model.
Aluminum parts offer excellent durability and rigidity.
Compatible with touring car R/C models.

These spacers are designed to gain even greater precision in your touring car model tread setup (the width between the wheels), with these 0.75mm spacers.

Contains Aluminum Wheel Spacers x8
Altering the tread of the car allows you to modify the stability of the model.
Aluminum parts offer excellent durability and rigidity.
Compatible with touring car R/C models.

This Hop-Up Option is for use with the TC-01 chassis, and helps to contribute to improved suspension feel. Compared to the standard plastic parts, these parts have less flex which contribute to more direct feel from the suspension.

• Aluminum Rocker Arms x2
• Lightweight and rigid aluminum arms can be used in place of kit-standard plastic components, boosting damper performance and improving suspension feel.
• Parts have Tamiya blue anodized finish.
• Compatible with TC-01 chassis cars.
• Requires TWO sets to compete one car with front and rear rocker arms.

These are 4mm wheel hubs used in many of Tamiya’s RC on-road cars. They replace the standard plastic hub found in stock kits. A slit is provided in the wheel hub, and the gap is tightened with a cap screw. This method of attachment more securely fixes the wheel axle to the hub thereby dropping the 2 x 10 mm stainless steel shaft when removing the wheel is impossible. Furthermore, because it is made of aluminum, you get more accuracy, rigidity, and precision when mounting wheels to your car.

Tamiya wheel hubs are available in 4mm, 5mm and 6mm widths to give you different offset wheel options and tuning possibilities.

This is a spare body parts set of the 1/10 scale FIA Formula E Gen2 race car. It is specifically designed to fit the Tamiya TC-01 chassis machine.

• Polycarbonate body. Rear wing and side parts, with halo and side mirrors molded as separate components in polycarbonate-ABS (white).
• Stickers included to decorate your car in the futuristic looking Championship Livery scheme.
• Compatible with TC-01 chassis cars only.

The steering bridge found in the TC-01 chassis is made out of plastic. This upgraded version is made of machined aluminum which changes the steering feel of your car and provides smoother operation. Use the upgraded part for a sharper handling feel.

• Aluminum Steering Bridge x1
• This precision, lightweight aluminum bridge can be used in place of the kit-standard T9 plastic part. It boosts overall chassis rigidity and smooths out handling.
• Tamiya blue anodized finish.
• Recommended for use with the aluminum steering arms in Item 54958.
• Compatible with TC-01 chassis cars.

This Hop-Up Option is for use with the TC-01 chassis, and helps to contribute to superior cornering stability.

• Soft (1.1mm), Medium (1.2mm) & Hard (1.3mm) Stabilizer Rods x1 each
• Aluminum hex head ball connectors allow easier adjustment.
• The stabilizer can be employed on the front or the rear, helping the car balance going through corners. It fits snugly between the upper cover and the chassis, and clearance can be adjusted via the 3x3mm grub screws.
• Black base color rods have color markings to differentiate their stiffness.
• Compatible with TC-01 chassis cars.
• Requires TWO sets to compete one car with front and rear sway bars.

These double cardan shafts promise super-efficient power and enhanced durability for your touring car chassis model. They are designed to fit the Tamiya TC-01 and TB-05 chassis machines. They may also be used with Tamiya cars outfitted with the TRF 419 (Tamiya Racing Factory) Suspension Upgrade Set or the TA05 & TA05IFS Short Reversible Suspension Set.

• Assembly type 39mm Double Cardan Joint Shafts x2
• Dual joints ensure that rotation is efficient, and the motor's drive is transmitted to the wheels with minimal power loss.
• Black finish.
• Needle pin length has been increased from 9.8mm to 10.8mm, for improved durability when using separately sold Item 54921 Reinforced Swing Shaft Caps.
• Compatible with TC-01 and TB-05 chassis cars, or those using Items 54886 or 54083.

This titanium screw set is for the TC-01 chassis. It contains 76 screws of different types, which are in total roughly 13g lighter than kit-standard steel equivalents. They employ Hex heads to enable even more secure tightening compared to Philip head screws in the original kit.

• 3x5mm Titanium Hex Head Screws x4
• 3x6mm Titanium Hex Head Screws x6
• 3x8mm Titanium Hex Head Screws x18
• 3x10mm Titanium Hex Head Screws x13
• 3x12mm Titanium Hex Head Screws x12
• 3x6mm Titanium Hex Head Countersunk Screws x5
• 3x8mm Titanium Hex Head Countersunk Screws x10
• 3x10mm Titanium Hex Head Countersunk Screws x8
• Compatible with TC-01 chassis cars.

1/10 Ford Mustang GT4 (TT-02) Kit

Geïnspireerd door de Ford Shelby GT350R-C, is de Ford Mustang GT4 ontworpen om te concurreren in GT4-racen over de hele wereld. Aangedreven door een 5.2-liter V8, en met een 6-traps sequentiële paddle shift transmissie, multimatische ophanging en aerodynamisch verfijnde body, snijdt de Mustang GT4 een opwindend figuur. Nu maakt het een triomfantelijke entree in het Tamiya-assortiment van R / C-modellen. Het TT-02-chassis is aanpasbaar en leuk om te rijden - een goede keuze om aan de slag te gaan met R / C-touringcars!

Over het model

• Dit is een assemblagekit voor het R / C-model met 1/10 schaal. Lengte: 459 mm.
• De gespierde vorm is vastgelegd in polycarbonaat en is ontworpen met toegang tot de CAD-gegevens van de eigenlijke auto voor buitengewone nauwkeurigheid. Voor en achter lichte gevallen zijn ook gegoten in polycarbonaat.
• Wielkasten zijn voorgesneden voor een eenvoudiger montage van de carrosserie.
• De beginnersvriendelijke, zeer flexibele TT-02 is een veelzijdig en eenvoudig te onderhouden 4-assig chassis met asaandrijving.
• Afzonderlijk gegoten plastic onderdelen geven de achtervleugel en zijspiegels weer.
• Racy 10-spaaks wielen zijn gegoten in gun metal en gecombineerd met slick-banden.
• Stickers zijn inbegrepen om een ​​originele kleurenprint te maken, net als maskerende stickers voor gebruik bij het schilderen.
• Een uitgebreid aanbod van TT-02 optie-onderdelen biedt een aantal mogelijkheden om uw auto te tunen.

Tamiya nummer: 58664